TCL C7L vs LG MRGB85B

The TCL C7L is, without doubt, an extremely bright TV. In synthetic tests using static test patterns it can reach peak brightness of around 2800 nits. That's a truly phenomenal result, given the price bracket it occupies. Unfortunately, measurements with real film scenes are not as spectacular as the white-square tests. Brightness in real HDR footage on the C7L falls to around 1200 nits. That's still very good, because the vast majority of modern films are graded to that level. However, when small, pinpoint elements appear on screen, the brightness of those details drops dramatically, even to around 400 nits, which reduces the HDR impact. The TV does this deliberately to preserve black levels and avoid excessive blooming. This is somewhat understandable, but it also shows that Mini LED technology is not completely without compromises in this respect. As for the HDR effect itself, alongside brightness the key factor is, of course, colour. Thanks to the use of new 'super' quantum dots, the colours are simply superb and among the best on the market. The TV is able to achieve very wide coverage of the BT.2020 and DCI-P3 colour gamuts, matching the best RGB Mini-LED screens with ease. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which is often problematic in competing RGB Mini-LED TVs.

LG MRGB85 offers moderate brightness. On test patterns it reaches about 700 nits, which by itself is a decent result. In actual movie scenes the values are lower and most often fall between 400 and 600 nits. Bright, expansive shots perform best. In scenes with a lot of black the TV noticeably limits luminance, trying to maintain the highest possible contrast. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Especially in darker parts of films the limitations of edge-lit backlighting and imprecise local dimming become noticeable again.

HDR Colors

A much stronger suit of the MRGB85 is its colors. The TV covers about 95% of the DCI-P3 color space and 74% of BT.2020, allowing HDR material to look vivid and striking. Colors are well saturated, and the difference compared with basic LCD TVs is clearly visible. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colors is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and yields more saturated red shades. This solution works well for color reproduction, but it does not change the limitations of dimming itself. The LEDs are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

When it comes to out-of-the-box colours, what's new in TCL TVs, including the C7L model, is the addition of a picture mode called Filmmaker Mode. This is significant because such a mode was not previously available from this manufacturer. As the name suggests, this setting is meant to present the picture with the filmmaker's full intent. After our tests we can confirm that it is, without doubt, the best built-in mode on this TV if you want faithful colour reproduction straight out of the box. However, we certainly wouldn't say it's perfect. Like most devices on the market, this C7L also had some factory calibration errors. The white balance in Filmmaker mode drifted towards a slightly greenish-yellow tint, caused mainly by an excess of the green component and a noticeable shortfall in blue. Of course, this won't be a major drawback for the average viewer, but if you care about perfect whites, natural skin tones and getting the full potential out of the structure of those new "super" quantum dots, the TV really needs professional calibration.

We tested the TV in Filmmaker Mode, because among the available settings it offered the image closest to the reference. However, the out-of-the-box colour reproduction was not perfect. The largest deviations concerned the white balance, with the image showing too much red and not enough blue, which caused the whole picture to shift noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright parts of the image did not always look natural. It was not a fault that completely ruined the viewing experience, but in direct comparison with the same screen after calibration the difference was readily apparent.

After professional calibration we managed to greatly improve the situation in the factory Filmmaker Mode. After our corrections, the errors in the ColorChecker test and across the wide colour gamut fell below the threshold of human perception, that is below a value of 3, which is a very good result. The TCL C7L definitely benefits from such a procedure in terms of colour fidelity, and it's hard to deny. Brightness management for HDR content looks a little worse after calibration, though. As I described earlier, even though we set this model up correctly, when you play real film scenes the TV can handle its brightness in a rather peculiar way. It often brightens some elements on screen contrary to the creator's intent, which is clearly visible in the EOTF traces measured from specific films. Despite this defect, or rather a specific characteristic of the television, one thing you can't fault is that after calibration the C7L was able to reproduce colours accurately.

Calibration primarily allowed us to correct the white balance and remove the previously noticeable warm tint. After adjustment the whites stopped leaning towards a yellow cast and the colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to reference. A similar effect was achieved in HDR. After calibration the image became more organised, although not all of the TV's limitations could be eliminated. The greatest reservations still concerned intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, whereas in more demanding HDR material its limitations remain clearly visible.

This can be seen as, to some extent, the Achilles' heel of the C7L. Unfortunately, this TV uses the older MediaTek Pentonic 700 chip, which has never been famed for outstanding digital image processing. You can clearly see that in the behaviour of the progressive smoothing function, the feature responsible for reducing jagged edges and removing digital noise. It simply performs very poorly. When set to low, its effectiveness is almost non-existent. The only small plus is that the algorithm does not further spoil the picture or blur details unnecessarily. Upscaling, that is scaling lower-resolution content to 4K, performs slightly better. It is simply adequate and does not stand out against the competition. There is no denying that the C7L would benefit greatly in this regard if the manufacturer opted for the newer Pentonic 800 processor, which is now appearing in an increasing number of rival models.

Upscaling and digital image processing perform quite well on the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution content, and regardless of source you can also easily disable overscan. The TV also copes well with compression artefacts. The "Smooth Gradation" feature can effectively reduce visible banding and tonal unevenness, but it is not always precise. At higher settings it can also smooth out fine details, for example surface textures. On the plus side, it does not remove film grain. It's safest to use the "Low" or "Medium" setting, which gives the best compromise between artefact reduction and preserving detail.

The TCL C7L uses a native 4K panel with a 144 Hz refresh rate, which at lower resolutions when connected to a PC can even reach up to 288 Hz. These are, of course, very high figures and impressive on paper, but bear in mind that almost all the dynamic content you’ll watch on this TV will still run at around a maximum of 120 Hz. To rein in that motion, the TV’s menu includes a motion-smoothing system called "Motion Clarity". It offers several preset modes, including a user mode that we strongly recommend you set manually using our tried-and-tested guides on our YouTube channel. There are two key sliders available. The first, "Blur Reduction", is responsible for cutting motion blur and improving sharpness in dynamic 60-fps material, such as sports broadcasts. The second slider, "Flicker Reduction", lets you add artificial frames to films and series shot in cinematic 24 or 30 frames per second. This, of course, can completely eliminate the irritating judder that appears during camera movement.

The LG MRGB85 is equipped with a VA panel with a native 144 Hz refresh rate, so it performs very well in terms of motion handling. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera movement is noticeably smoother than on basic models with 60 Hz panels. We also have TruMotion, which lets you set the level of motion smoothing yourself. You can keep a more cinematic feel to motion or increase smoothness, which works well for sports broadcasts and TV programmes. The adjustment range is wide, so you can easily tailor the smoothing to your own preferences.

When it comes to gaming, the TCL C7L is simply an outstanding TV for players. Thanks to two HDMI 2.1 ports with full 48 Gbps bandwidth, you get access to all the key features required by console owners and powerful PC rigs. There’s a well-working ALLM mode with very low input lag and VRR frame synchronisation that operates over an impressive range from 48 to 288 Hz. Importantly, unlike some rivals, TCL has properly implemented the console HDR10 HGIG profile and supports Dolby Vision in games. The package is completed by a very well designed gamer panel, the Game Bar, which even lets you edit its appearance and change the theme so it perfectly matches the style of your console.

The only thing you can, and even should, criticise is that the TV offers only two full-spec HDMI 2.1 ports, while the other two are older HDMI 2.0. That creates quite a logistical problem. Why? Because one of the fast ports also handles the return audio channel eARC. In practice this means that if you connect a soundbar or home cinema system to the TV, you’ll be left with just one free HDMI 2.1 socket. If you have two consoles at home, or a console and a powerful PC, unfortunately you’ll have to give something up or keep juggling cables at the back of the case while trying to maintain convenient control of the audio system.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer didn't skimp on features and has essentially brought the full suite of functions from pricier TVs to this model. You get three HDMI 2.1 ports with the full 48 Gbit/s bandwidth. Each supports 4K at 120 Hz from a console, and when connected to a PC also 4K at 144 Hz. So you don't need to worry which port to plug your console or PC into, because they all offer the same capabilities. Also on board are VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. There's also Dolby Vision Gaming, which means in supported games you can use high refresh rates and dynamic HDR simultaneously on Xbox. The package is rounded off by Game Optimizer, a handy in-game menu for gamers. Without leaving the game you can change the picture profile, brighten shadow details or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as much more expensive LG models.