TCL C75B vs Dreame S100

During our test, the TCL C75B "spat out" around 380 nits of brightness. We recorded similar results while watching most of the films we tested. They can be considered average – the television does not perform poorly in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, these results are better than those of budget models, which can achieve almost half the brightness values. However, for HDR enthusiasts seeking stronger lighting effects and greater realism, the C75B may prove insufficient. On the positive side, it's worth mentioning the DCI-P3 colour gamut coverage of 95%. This is a very good result that easily suffices to enjoy a wide range of colours in content available on popular streaming platforms. Vivid and rich colours are definitely a strong point of this model.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

TCL C75B offers several picture modes, but in our opinion, the best choice is the “Film” mode. Although its settings are quite decent, the television struggles with some colour reproduction issues. In our tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered accurate. This effect was particularly evident in skin tones, which appeared unnaturally flushed. The main culprit for this phenomenon turned out to be the white balance, characterised by an excessive amount of blue and red in both HD and 4K HDR materials.

An additional problem was the way brightness was rendered. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, disappearing into complete blackness (e.g., the lower part of the screen in the comparison photo - around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that we might encounter a similar problem in 4K HDR content.

Thanks to our experience and the right tools, we decided to take matters into our own hands and see how much we could extract from this model after professional calibration. We describe the details in the next section.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

After calibrating the TCL C75B, it has clearly improved in terms of colour reproduction. Although the television does not offer many options for adjusting the white balance, we managed to enhance its settings quite significantly. As a result, the image is no longer excessively pink, and the colours now look much more natural and harmonious.

The gamma jump, which was previously an issue, has not completely disappeared, but we have managed to reduce it considerably. This has made details in dark scenes more visible – both in HD and 4K HDR materials.

Unfortunately, the lack of local dimming is still noticeable. The "blooming black" effect remains, but that is a limitation of the display itself. Nevertheless, the colours after calibration look far better, and the image is much more enjoyable to watch.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

TCL C75B has a tone transition smoothing function, but unfortunately, we cannot commend it. Regardless of the selected level – low or high – tone transitions in older materials remained visible, as if the function wasn't working at all. It's hard to say anything positive about it, as in practice it seems completely useless.

The image scaling is better. The television performs quite decently, although on thinner elements, like branches in the background, you can notice slight jaggedness. However, this is not something that significantly interferes with daily viewing.

Unfortunately, a bigger problem turned out to be overscan, which is cutting off the edges of the image. In our tests, there were instances where news tickers or other elements near the edge of the screen were cut off. This is definitely something to pay attention to, especially if we use the television for watching news programmes or content with text on the screen.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

The TCL C75B definitely has something to offer gamers. The television is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really impressive results, especially for a model from the entry-level range.

In addition, there are features for improving fluidity and reducing motion blur in films. The "Motion" option allows precise adjustment of the effect on a 10-point scale, which offers great personalisation possibilities - everyone can set the fluidity as they like.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

The TCL C75B is undoubtedly a television designed with gamers in mind. It offers nearly everything that even the most demanding console users could need. With the implementation of fully capable HDMI 2.1, the television supports features like ALLM (Automatic Low Latency Mode) and VRR (Variable Refresh Rate) – operating within the full potential of the television, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, allowing for even better detail reproduction in HDR-optimised games. The C75B is also equipped with a very convenient interface for gamers in the form of Game Bar, where all key parameters such as refresh rate, input lag, and image settings can be checked – all within a single click.

In a nutshell: the C75B is a great choice for gamers, offering a wide range of features that allow users to fully enjoy the capabilities of modern consoles and games.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.