TCL A300W NXTVision vs Philips OLED811

When it comes to brightness, the TCL A300W is definitely the darkest television among all frame-style models, such as Samsung The Frame or Hisense CanvasTV – and unfortunately, this is immediately noticeable. In our measurements, the peak luminance reached a mere 400 nits, and on test film patterns, this value dropped to 350 nits. This is definitely too little to experience the true “magic” of bright HDR effects. As a consolation – the television is equipped with a PFS LED coating (which is something like QLED), providing very good coverage of a wide colour gamut, both DCI-P3 and BT.2020. In addition, it has full support for all popular HDR formats – HDR10, HDR10+, HLG, and Dolby Vision – which somewhat compensates for the lack of brightness and helps improve the overall perception of content in this quality.

Philips OLED811 uses a new generation of WOLED EX panels, also found in models such as the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see this clearly in films and series. All kinds of bright flashes have the right intensity, especially when they appear against a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that does not mean you will see that level of brightness in every shot. When the screen is filled with a large amount of white or a wide explosion, brightness falls to around 600 nits. That is still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. You get saturated reds and lush greens, and when watching it’s hard to find major faults in that respect. It looks a little worse with the much wider BT.2020 gamut, whose most saturated shades are already out of reach for this panel. There is also the issue of the white subpixel that the WOLED panel uses to boost brightness. With very bright colours you can see a certain washout: the colour is bright but loses some of its intensity. It is precisely in such situations that QD-OLED panels from Samsung Display have the advantage. However, in most films and series this is not something that will immediately stand out.

TCL A300 offers several picture modes, but without a doubt, the best is the movie mode. Unfortunately, although it is the best option available, it is not free from errors. In both HD and HDR content, the image has a noticeably too warm hue - it leans slightly towards pink, which is particularly noticeable in scenes with snow. Instead of pure white, we get a pinkish tint that spoils the natural perception of colours.

The management of brightness is also not very good. In the case of older HD material, the image often seems too dark - which is confirmed by the inflated gamma value. Conversely, with HDR content, the effect is the opposite - the image is overly bright, which we observed in scenes from the film Pan. Such a lack of consistency also affects the accuracy of colour reproduction - a test with the ColorChecker showed that many samples clearly deviate from the reference values.

Fortunately, TCL allows for manual adjustment of settings, so we decided to check how the television would perform after our professional calibration. The effects of this adjustment are described below.

Film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain small, both in SDR and HDR, so you can sit down to watch without adjusting the settings first. There are no major inaccuracies that would immediately distract from the film. It falls a little short of perfection, though. The white balance shows a slight lack of red compared with green, so whites and greys can have a faint greenish tint. It is not a strong colour cast, but measurements clearly show it. There are also minor brightness deviations in SDR: some parts of the image are slightly brightened, and the darkest shades are not always reproduced evenly. In HDR the TV sticks much closer to the reference, although in places it gently lifts detail from the shadows. These are generally areas that could be improved. The factory film mode provides a good starting point, and calibration will reveal how much more can be gained from it.

After our professional calibration, the TCL A300 has literally received a new lease of life. The image has stopped being too warm, and the colours finally look as they should – which was confirmed by the ColorChecker test, where the colour samples finally started to hit their marks, at least to some reasonable extent. It was also possible to partially correct the brightness management – the image is now more balanced and less "wobbly" between different types of content. Of course, certain limitations cannot be overcome – a slightly noticeable blooming effect is still present, but that is a characteristic of the technology and not something that can be eliminated even after professional settings.

Generally speaking: after calibration, the A300 performs significantly better and gains a completely new quality.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to correct the white balance and eliminate the slight tint visible in the factory settings. Errors in the Color Checker measurements for SDR and HDR fell to around 1 to 2, and many samples are even below 1. That's a level at which differences from the reference image are hard to spot with the naked eye. We also improved the gamma, and only in the brightest whites is there a slight brightening remaining. In HDR the EOTF curve also tracks the reference closely, although the TV still tends to gently boost the brightness of small elements, such as stars or on-screen text. This gives the picture a little extra sparkle that shouldn't be there, but otherwise there's little to fault. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

TCL A300 handles tonal transitions in high-quality films very well, but the question arises – how does it perform with weaker material? The television is equipped with a tonal transition smoothing function, but its effectiveness can be described in one word: "random." In one scene it could work and improve the gradation, but when turned off… the effect remains the same. There is a lack of consistency and predictability.

Image scaling is also not one of A300's strong points. On the test chart, the main character actually looked better than on the raw signal, but with thin lines – such as fonts or background details – there was noticeable jaggedness and aliasing. On the positive side, the television does not crop the image and has no problems with overscan, but the overall quality of scaling is rather average.

OLED811 handles lower-quality material reasonably well, though it falls well short of perfection. The "Banding reduction" function helps to smooth tonal transitions and on the low setting gives a fairly good result. It does not remove bands between shades as effectively as similar solutions from some competitors, but at least it does not introduce new artefacts in the process. This is a sensible setting for everyday viewing. There is still some dissatisfaction, however, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' implementations, cope with the effects of heavy compression more effectively even at similarly low settings. Much therefore depends on how a given manufacturer makes use of its capabilities. We have a few more comments about the upscaling to 4K. There is a lot of detail, but the overall image looks rather soft. Edges are heavily smoothed, which robs the picture of a bit of sharpness and clarity. This can be partly corrected with the sharpness slider in the menu, though that will merely accentuate outlines rather than recover detail. On the plus side, there is no overscan; even with an SD signal the TV does not crop the edges of the picture.

The TCL A300 is equipped with a 144 Hz panel, which should immediately satisfy practically everyone – both gamers and sports fans. The motion is smooth and the image is clear even during fast-paced scenes. Additionally, the television offers motion enhancement functionality called "Motion," where we find two sliders on a 10-point scale. These allow you to adjust the effect to your own preferences – from a classic, cinematic look with visible frames to a very smooth (though somewhat unnatural) image reminiscent of soap opera effects. This way, everyone can find a setting that suits them.

In terms of motion handling the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sport, the picture stays clear and moving objects do not leave noticeable smears. The fast response of OLED pixels helps here; this is clear in the UFO test, even on dark backgrounds. There are also motion smoothing controls. For films you can adjust the level of smoothing to suit your taste, ranging from preserving a cinematic character to much smoother motion. A separate blur reduction setting is useful for fast-paced material such as sports broadcasts.

TCL A300 is a television designed not only to transport us to a digital art museum but also to a full-fledged gaming world. Here, we find practically everything one could expect from gaming equipment: two full-bandwidth HDMI 2.1 ports, 144 Hz refresh rate, VRR support, and ALLM.

The proper implementation of the HGIG mode also deserves praise – something that competitor Hisense sometimes struggles with. The television easily handles lower resolutions (e.g., Full HD) while maintaining high refresh rates, which older console or PC owners will appreciate.

In addition, there is an attractive and clear GameBar that facilitates quick access to settings for gamers. The A300 is really well-prepared for top-level gaming – it's just a shame that issues with smearing slightly tarnish its overall image as a gaming device.

OLED811 has almost everything you could expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach 165 Hz. It also has VRR, which helps prevent screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

Another plus is that HGiG works correctly, so once HDR is set on the console the TV doesn't apply its own changes to image brightness. There's also a Game Bar to check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for gaming, but there is a significant catch, which you can read about below.