TCL A300W NXTVision vs Philips MLED920 / MLED910

When it comes to brightness, the TCL A300W is definitely the darkest television among all frame-style models, such as Samsung The Frame or Hisense CanvasTV – and unfortunately, this is immediately noticeable. In our measurements, the peak luminance reached a mere 400 nits, and on test film patterns, this value dropped to 350 nits. This is definitely too little to experience the true “magic” of bright HDR effects. As a consolation – the television is equipped with a PFS LED coating (which is something like QLED), providing very good coverage of a wide colour gamut, both DCI-P3 and BT.2020. In addition, it has full support for all popular HDR formats – HDR10, HDR10+, HLG, and Dolby Vision – which somewhat compensates for the lack of brightness and helps improve the overall perception of content in this quality.

Philips MLED920 in our measurements in static tests even reached around 900 nits, which is really a solid result for a mid-range model. In practice, this translates to a lot of satisfaction during viewing sessions – in scenes rich in bright light, such as the first, third or fifth test slide, the screen managed to generate about 700 nits, which is sufficient to feel the true "HDR effect." However, it cannot be denied that the limited number of dimming zones and the compromises typical of mini-LEDs in more demanding scenes reveal their nature. In sequences with small light sources – like the moon or a scene from the film Sicario 2 – the television clearly prioritises maintaining deeper blacks at the expense of the brightness of these small elements. For most viewers, this is still a reasonable compromise, as the dark background looks significantly better, though it is important to be aware that the details themselves may not impress with their intensity. There is also a certain sense of dissatisfaction regarding the colours. Although the applied PFS filter (the equivalent of quantum dots known from QLEDs) does its job and the colours appear quite vivid, the coverage of the DCI-P3 palette reaches “only” 90%. In everyday viewing, this will be sufficient, but in extremely colourful productions – like the latest Disney animations – one can notice that some tones are not as vibrant as they could be in other setups.

TCL A300 offers several picture modes, but without a doubt, the best is the movie mode. Unfortunately, although it is the best option available, it is not free from errors. In both HD and HDR content, the image has a noticeably too warm hue - it leans slightly towards pink, which is particularly noticeable in scenes with snow. Instead of pure white, we get a pinkish tint that spoils the natural perception of colours.

The management of brightness is also not very good. In the case of older HD material, the image often seems too dark - which is confirmed by the inflated gamma value. Conversely, with HDR content, the effect is the opposite - the image is overly bright, which we observed in scenes from the film Pan. Such a lack of consistency also affects the accuracy of colour reproduction - a test with the ColorChecker showed that many samples clearly deviate from the reference values.

Fortunately, TCL allows for manual adjustment of settings, so we decided to check how the television would perform after our professional calibration. The effects of this adjustment are described below.

Like every Philips television we tested, we primarily assessed the MLED920 in Filmmaker mode – this is meant to be the "most honest" mode, designed for films and to faithfully convey the intentions of the creators. Indeed, in terms of colour reproduction, it performs the best among all the modes available on the television, but it is not without flaws. The first thing that catches the eye is the white balance. The image has a slight tendency towards purple-pink tones, which gives it a somewhat unnatural character. An even bigger problem, however, turned out to be what we mentioned earlier – image blooming. Just looking at the gamma or EOTF charts reveals that the line significantly deviates from the norm, dropping below a value of 1.8. In practice, this means "bleeding" of the brightest whites, where the image becomes almost milky. Fortunately, most of these issues can be corrected – the MLED920 responds well to calibration, and with a few adjustments, one can significantly improve the viewing experience.

After our professional calibration, the TCL A300 has literally received a new lease of life. The image has stopped being too warm, and the colours finally look as they should – which was confirmed by the ColorChecker test, where the colour samples finally started to hit their marks, at least to some reasonable extent. It was also possible to partially correct the brightness management – the image is now more balanced and less "wobbly" between different types of content. Of course, certain limitations cannot be overcome – a slightly noticeable blooming effect is still present, but that is a characteristic of the technology and not something that can be eliminated even after professional settings.

Generally speaking: after calibration, the A300 performs significantly better and gains a completely new quality.

After calibration, we managed to largely tame the white balance – to the extent that the average viewer will not be able to detect distortions in colours. The characteristic pink-purple haze that previously disrupted the naturalness of the image has also disappeared. The colour palette has been organised, and the colours appear more coherent and neutral. The gamma in SDR content post-calibration looks really good – there is no longer any mention of the previous 'bleeding' effect in bright scenes. The image has become more contrasty and devoid of that milkiness which had previously greatly harmed the viewing experience. In the case of HDR content, the improvement is also noticeable, although here it is still evident that the television is going 'its own way'. The EOTF curve cannot be fully shaped, as Philips simply does not offer the tools to allow precise control over this parameter in its settings. In many films, the television still exposes the image 'in its own way'. Despite these limitations, the calibration has delivered quite a bit of good – most of the colour distortions have been minimised, and the overall balance of the image has significantly improved. However, it must be noted that certain barriers stem from the very design of the hardware and simply cannot be overcome.

TCL A300 handles tonal transitions in high-quality films very well, but the question arises – how does it perform with weaker material? The television is equipped with a tonal transition smoothing function, but its effectiveness can be described in one word: "random." In one scene it could work and improve the gradation, but when turned off… the effect remains the same. There is a lack of consistency and predictability.

Image scaling is also not one of A300's strong points. On the test chart, the main character actually looked better than on the raw signal, but with thin lines – such as fonts or background details – there was noticeable jaggedness and aliasing. On the positive side, the television does not crop the image and has no problems with overscan, but the overall quality of scaling is rather average.

The manufacturer has equipped this model with several features that improve signal quality, and although we usually approach such "enhancements" with caution, here they prove to be really helpful. The key option is called "distortion reduction" – it works best at a medium level, as on one hand it effectively smooths out unwanted stair-stepping and colour banding, while on the other it does not excessively cut out details, allowing the image to still look natural.

Things are a bit worse with upscaling. Lower quality materials – such as the test video with the model – appeared soft and lacking in sharpness. Indeed, it can be partially corrected with the sharpness slider in the menu, but the effect remains far from what competitors in a similar price range offer. Philips therefore still needs to work on this element, as compared to the successful improvement of tonal transitions, the upscaling simply falls short.

The TCL A300 is equipped with a 144 Hz panel, which should immediately satisfy practically everyone – both gamers and sports fans. The motion is smooth and the image is clear even during fast-paced scenes. Additionally, the television offers motion enhancement functionality called "Motion," where we find two sliders on a 10-point scale. These allow you to adjust the effect to your own preferences – from a classic, cinematic look with visible frames to a very smooth (though somewhat unnatural) image reminiscent of soap opera effects. This way, everyone can find a setting that suits them.

The Philips MLED920 features a 144 Hz panel, which immediately suggests that we shouldn't complain about motion smoothness. And indeed – the motion blur is relatively low for a VA panel, and although slight issues can sometimes be noticed on darker backgrounds, they are not something that would stand out to most people during regular viewing.

Another significant advantage is the presence of a motion smoother called “Motion Style.” It allows you to adjust the sensation of smoothness to your own preferences – if someone prefers a more “theatrical,” almost television-like image, they can increase the sliders, whereas if they prefer to maintain the natural “jumps” of cinematic frames, it’s enough to set lower values. This way, everyone can find their golden mean.

TCL A300 is a television designed not only to transport us to a digital art museum but also to a full-fledged gaming world. Here, we find practically everything one could expect from gaming equipment: two full-bandwidth HDMI 2.1 ports, 144 Hz refresh rate, VRR support, and ALLM.

The proper implementation of the HGIG mode also deserves praise – something that competitor Hisense sometimes struggles with. The television easily handles lower resolutions (e.g., Full HD) while maintaining high refresh rates, which older console or PC owners will appreciate.

In addition, there is an attractive and clear GameBar that facilitates quick access to settings for gamers. The A300 is really well-prepared for top-level gaming – it's just a shame that issues with smearing slightly tarnish its overall image as a gaming device.

For gamers, the Philips MLED920 is truly a complete tool. The manufacturer has taken care of everything that is considered standard in televisions designed for consoles and PCs today. It features ALLM, so the console automatically switches the screen to game mode, alongside VRR and a refresh rate of 144 Hz, which guarantees smooth gameplay even in fast-paced titles. All key HDR formats are supported – including HGiG and Dolby Vision Gaming for Xbox – which means that regardless of what you are playing and on which console, the television will be able to extract the maximum potential from the image. The Game Bar also proves useful in daily gaming – a relatively simple implementation by Philips, but a functional panel where you can quickly check image parameters, enable VRR or adjust settings without leaving the game. It may not be as comprehensive as the competition, but it performs its task flawlessly. And finally, something that sets Philips apart from the competition – Ambilight. The three-sided LED backlighting can create a huge impression in games, especially in the evening. It's also a way to slightly 'extend' the screen and enhance the feeling of immersion. And as colourful LEDs have recently become almost a mandatory element of a gamer’s room, the MLED920 fits into this trend perfectly.