Sony X75WL vs Hisense UR8S

The luminosity chart for the X75WL Sony television showed a maximum value of 350 nits, which is unfortunately not an impressive result. The television does not surprise with its brightness, and all the HDR scenes we tested lacked depth and the appropriate light effect that should accompany HDR content. Additionally, the poor coverage of the DCI-P3 colour gamut makes it difficult for the television to reproduce rich colours, which significantly affects the overall viewing experience of HDR content. The lack of adequate brightness and weak colour coverage mean that HDR effects are very limited in this model.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern peak brightness reached around 2200 nits. That’s a very good result, but as always what’s much more important is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes, where there’s a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has plenty of punch. It’s worse with small bright elements on a dark background. The TV clearly dims them to keep good blacks and to prevent excessive bloom. As a result things like single stars or tiny reflections can be only around 200 nits. And here HDR is no longer as impressive. So you can see that the local dimming algorithm works effectively, but it also has its cost: sometimes it simply sacrifices the brightness of small details in favour of contrast.

Colours

With RGB Mini-LED TVs colours should be judged a little differently than usual. If we look solely at the panel’s native capabilities, the UR8S performs excellently. We measured around 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs and this is where the potential of the RGB backlight is most obvious. The problem is that this potential is not always realised in real scenes. When we ran the same measurements on test patterns with a film background applied, saturation of some colours began to fall noticeably. Individual zones are not always able to control the three RGB components so precisely when the scene becomes more complex. This is most visible with blue and magenta. On simple test patterns they can look very strong, but in more demanding scenes samples of those colours visibly shrink. So the UR8S’s capabilities are enormous, it’s just that the TV cannot fully make use of them in every scene.

Colour reproduction tests for the model Sony X75WL are carried out in movie mode, which offers the best image settings, but it also has its flaws. The biggest problem with the X75WL Sony is the white balance – for both HD and 4K HDR content – which is characterised by a dominance of blue. As a result, the entire image feels too cold. The colour checker confirms these errors, showing that the colours lean towards cooler tones. In terms of brightness characteristics, the contrast gamma is at a fairly decent level, however, the same cannot be said for the EOTF curve. There are significant issues with maintaining appropriate brightness – the image is either overly bright or too dim, which impacts the visual perception of content.

For assessing the out-of-the-box colours we used Filmmaker mode, which is intended to show an image that is as close as possible to how the material was prepared. Looking at the white balance alone, the UR8S performs quite well. There is no strong tint that immediately jumps out, although as brightness increases a little too much blue and red start to appear, with a simultaneous shortfall of green. Colour errors therefore show up in measurements, but the image itself does not look bad. We have far greater reservations about how the UR8S manages picture brightness. In SDR the gamma sits around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the picture is too bright, especially in the midtones. Shadows are lifted too much, causing the image to lose some depth. A similar tendency is visible in HDR. The EOTF curve is above the reference value for a large part of its range, so the UR8S again brightens the image more than it should. This is not due to a lack of brightness — the TV has plenty — but to the way it manages that brightness. As a result, HDR content can look very striking, but not always precisely as it should.

X75WL Sony is one of those cases where image calibration may not be highly spectacular, but it offers a very good improvement in the perception of colours. The white balance, for both HD and 4K materials, has been significantly improved – there is no longer a strong dominance of cooler shades. The gamma curve also appears more stable, which translates into better image quality. However, the biggest issue remains the EOTF curve, which is responsible for brightness in 4K materials. Due to the technological limitations of the television (IPS panel and lack of local dimming technology), it is hard to speak of a significant improvement, as we cannot extract more from this model. Despite these limitations, the tonal quality of the image has been significantly enhanced.

Hisense provides plenty of calibration options and, in SDR, these can yield a very good result. After calibration, the white balance is practically even across the entire range, and colour errors fall to very low values. The UR8S can be adjusted very precisely here. HDR is somewhat different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations begin to appear. The most interesting aspect, however, is the behaviour of the EOTF curve. Even after it has been correctly set on test patterns, the UR8S still tends to interpret brightness in its own way when watching films. Depending on the scene, parts of the image are slightly brightened while others are dimmed relative to how they should appear. This shows that the algorithms controlling the local dimming have a significant influence on the final image. Calibration therefore allows colours to be improved very effectively, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

In the case of low-quality tonal transitions, the television Sony X75WL performs poorly. The lack of any feature to improve tonal transitions results in noticeable imperfections in colour gradation. However, one can credit the quite good digital processing – the image is displayed without overscan, and overall it looks relatively good thanks to the added slight sharpness, which some users may appreciate.

A big plus of the UR8S is the use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model's stronger points. The TV handles smoothing tonal transitions very well, especially with lower-quality content. The feature responsible for this effect works effectively without overprocessing the picture. Even on the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image is not overly sharpened. The UR8S simply copes very well with a weaker signal, and in this respect it is one of its most notable strengths.

The X75WL Sony television is equipped with a 60 Hz panel, making it more suitable for watching films than for dynamic gaming. This model features a motion smoothing function called Motionflow, which allows the user to adjust the picture on a 10-point scale. Smoothness is responsible for adding intermediate frames, thereby increasing the fluidity of motion, while the image becomes more theatrical, minimising the cutting effect. Clarity reduces motion blur, which is particularly useful in fast scenes such as sports or dynamic actions in films. With this feature, users can adjust the fluidity and sharpness of motion to their own preferences.

The UR8S is equipped with a panel with a native 180 Hz refresh rate, so right from the start it offers excellent motion handling. The panel itself performs really well here, although some limitations typical of VA panels are still visible. Motion blur is relatively minor for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

X75WL is not the best television for gamers. It only has the ALLM (Auto Low Latency Mode) feature and a basic Game Bar, which are not enough to satisfy more demanding users. In this price range, one could expect support for features like VRR or 120 Hz refresh rates - although in FULLHD, which are already standard - unfortunately, they are lacking here. This is a major downside for Sony, as the competition offers much more for gamers in a similar budget.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you can expect from a modern console or PC display. It offers ALLM, VRR and 4K at 120 Hz. There is also Dolby Vision in Game Mode, so when using, for example, the Xbox Series X you do not have to give up that HDR format. PC gamers get even more options. The panel can run at 4K at 180 Hz, and dropping to Full HD can raise the refresh rate to as much as 330 Hz. There is also a Game Bar that lets you quickly check key information and change gaming-related settings. The only clear omission is a correct implementation of HGiG. With it enabled the TV still alters HDR brightness mapping, so we do not get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.