Sony Bravia 9 (XR90) vs Philips PUS7000

The results of brightness measurements on the Sony Bravia 9 are phenomenal. Each scene reaches well over 1500 nits, and when watching films, the television can sometimes shine even brighter. It goes without saying that such brightness allows for unprecedented experiences and engagement with video material at the highest possible quality. Thanks to the high coverage of the DCI-P3 colour palette, the image is full of colours and, combined with such high luminance, it practically breathes. With high peak brightness, viewers can enjoy the full range of colours even in the most challenging scenes, such as those based on dynamic lighting changes. The Bravia 9 offers support for Dolby Vision and HDR10 formats, which further enhances the viewing experience.

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The best factory mode in Sony televisions has consistently remained "IMAX Enhanced" for years. It was this mode that we used throughout the entire testing procedure. Although it is indeed the most similar to the standard compared to other predefined options, it has a number of aspects that can be improved to make viewing even more enjoyable. When we look at the gamma in SDR materials, we notice quite a significant boost that will be associated with image contrast. It is worth noting that the very beginning of the graph has an even greater rise compared to the reference, leading to a blending of details in the blacks, creating a uniform blot. The EOTF curve in HDR content looked quite correct and exhibited only minor deviations from the reference. However, a common feature for both was: a green colour dominance in white balance, issues with greys and overall colour misalignment. The aspect that stood out the most was related to the uneven distribution of hues in white balance. Due to the excess of the aforementioned colour, the image was covered with an unpleasant greenish tint.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

The colour reproduction after the calibration process should be regarded as excellent. Regardless of the signal, whether SDR or HDR, we can expect an image that is remarkably close to what the film director saw. Virtually every flaw in the image has been modelled and maximally corrected. This was made possible thanks to the advanced tools used for the calibration process, which Sony has been providing in its televisions for years, including 2- and 20-point grey scale adjustment as well as a very comprehensive CMS.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

Let’s take another look at the quality of tonal transitions, but this time we will analyse the quality of image scaling, which will be significantly important when watching lower quality materials. For starters, we will take a look at the function responsible for the quality of tonal transitions. And while by default they are quite average, after activating the option, even at the lowest level, we can confidently say that these are among the best we have seen. You can confidently enable this feature, as it does not cause any negative phenomenon, such as film grain blurring.

Sony has been boasting for several years now that its "XR" processor is unmatched when it comes to image scaling. And we find it quite easy to believe, because in fact the image is extremely sharp, yet very natural.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

The maximum refresh rate of the Sony Bravia 9 is 120 Hz. This is the essential minimum for watching primarily sports or materials with significant motion dynamics while maintaining a sharp and smooth image. For demanding users, the manufacturer has implemented a very comprehensive smoothing system, which has been divided into three segments: Smoothness (Film), Smoothness (Camera), and Clarity. The first two correspond to the degree of blurring and the degree of smoothing, respectively. The third option will be described in more detail below. Moreover, we can adjust all settings to various degrees, each of which will produce an effect, ensuring that we can find our own golden mean. In the picture, we present a setting with slight smoothing, without the soap opera effect.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

The Sony Bravia 9 television is equipped with four HDMI ports. However, somewhat inexplicably for a device of this class, only two of them operate in the 2.1 standard. That said, it should not be overlooked that almost all functions perform excellently and do not cause any negative feelings when being activated. Games running either in HDR10 or Dolby Vision have very low input lag, allowing for a very comfortable session with the title. A consolation remains in the form of a good implementation of the HGIG mode, which, after proper adjustment, does not differ significantly from Dolby Vision.

A year ago, Sony added to its televisions what has long been a standard for some manufacturers. This refers, of course, to the GameBar, enabling quick adjustment of settings without the need to exit the game. The implementation of this feature was successful and works very efficiently. We have been provided with conveniences such as: a crosshair grid, black level correction, and the option to reduce the screen to the proportions of gaming monitors.

The Sony Bravia 9 will undoubtedly find its fan base, most likely among PlayStation enthusiasts. Here, we must admit that it will be the most sensible choice, as in practice both the console and the television possess exactly the same capabilities. Looking at the bigger picture, while overlooking the issues with Dolby Vision in games, one cannot detract from the fact that the Bravia 9 is a very good television in the context of gaming.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.