SONY Bravia 9 II XR95M2 vs Samsung S90H (WOLED)

The real showcase of the new backlight architecture and Sony’s processor is HDR material reproduction. At the official launch Sony engineers said (not officially 😉) that the brightness of the Bravia 9 II should be almost identical to their professional director’s monitor BVM-HX3110, which is priced at astronomical sums. Our lab tests confirmed those were not empty promises. During synthetic measurements on the L20 test pattern the TV effortlessly exceeded the 4000 nits peak brightness barrier. Most importantly, these spectacular results translate directly to real film scenes. In most of the demanding shots we tested the screen easily maintained brightness around 2500–3000 nits. Regardless of the scene’s character, whether the light was small and pinpoint or flooded almost across the entire screen, the HDR effect was incredibly intense.

Colours

Colours are another key pillar of RGB Mini LED technology (Sony’s True RGB implementation). Specifically for testing these kinds of displays we have permanently introduced a new research section to examine how TVs handle colours in real-world conditions. Traditional tests using synthetic patterns are no longer enough to determine actual colour-gamut coverage. From now on we also measure colour saturation directly in selected film scenes by overlaying measurement points on them. So how do the colours perform?

In synthetic tests the Bravia 9 II achieves excellent results. For the popular DCI-P3 space used for HDR content the colour gamut coverage reached almost 98%, while for the extremely wide and demanding BT.2020 space measurements indicated nearly 90%. However, in real, varied scenes those values fall by a few percentage points. This is a direct result of the nature of zoned RGB backlighting. When differently coloured elements or bright white highlights appear side by side, light from adjacent zones starts to bleed together, producing a slight whitish glow. That naturally affects colour saturation, reducing it slightly. It shows that despite Sony’s brilliant algorithm for controlling the RGB LEDs, the number of zones is still too small to eliminate this effect entirely.

Is that something to complain about? Of course not. The Bravia 9 II’s final colour coverage is ultimately the same as that of a very good QLED TV, and the most important point is this: the vast majority of HDR films and series are distributed in the DCI-P3 colour space. In that standard Sony easily maintains very high colour saturation, regardless of the scene.

Samsung S90H in the WOLED variant is still an exceptionally bright TV for its price bracket, although compared with the QD-OLED version it is slightly dimmer. The difference is not as significant as in last year’s F series, where the gap could reach as much as 500 nits. Here the parameters of both panels are very similar, and differences in peak brightness are only in the order of 100–150 nits. In small-area measurements the S90H on the WOLED panel easily reaches levels close to 1500 nits. Such a reserve of power allows HDR dynamics to be reproduced phenomenally; all highlights, light reflections and explosions have the necessary punch, exactly as the creators intended in the editing studio. As with most OLED displays, when a very bright scene fills the whole screen protection systems activate and brightness naturally falls to around 700 nits. It is worth emphasising that this is still an excellent result on the market. Often noticeably better than many Mini LED screens in the same segment.

Colour gamut coverage

The biggest difference between the two S90H variants lies in colour reproduction and saturation. This results directly from the different construction of the WOLED panel, which uses an additional white subpixel. As a consequence, colours at very high brightness do not reach the same intense saturation, and the volume of the wide gamut is somewhat more limited than in QD-OLED. That does not change the fact that in everyday use these differences will be hard for most viewers to spot. The DCI-P3 space we measured reaches nearly 99% on the WOLED panel, which means that in the vast majority of real film scenes both variants will present an almost identical picture. The true distance only reveals itself in rarer, exceptionally demanding productions that use the ultra-wide BT.2020 gamut. Due to the specifics of the WOLED panel’s construction, coverage of that standard is about 15% lower compared with the S90HAT with a QD-OLED panel, so the brightest, heavily lit colours in HDR may appear slightly less vivid.

Contrary to appearances and high expectations, the Bravia 9 II we tested showed some issues with its factory calibration straight out of the box. Looking at the white balance charts, it’s clear it wasn’t perfect. In SDR content the red component was noticeably lacking, so the image leaned toward cooler, bluish tones. In HDR, however, the white balance in that respect was considerably better. So where do the visible errors in image reproduction come from? They result from unexpected tuning of the gamma and the EOTF curve. In both cases the Bravia 9 II straight from the factory showed a marked deviation from reference standards. In SDR material the gamma was significantly too high — at extremes it hovered very close to 2.8 instead of the target 2.4. In practice this meant the image looked artificially darkened and seemed washed of colour, with details in darker areas (the shadows) disappearing entirely. The opposite happened with HDR material, where brightness reproduction is governed by the EOTF. That curve was pushed too high above the correct value, causing the image to be artificially brightened across most luminance ranges. As with every TV we test, we subjected this unit to professional calibration. You can see the results and how we managed to correct these factory errors below.

In Filmmaker mode, which we strongly recommend switching on straight out of the box, the S90H offers very good factory colour tuning. Colours are natural and faithful to the creators' intent, without the irritating oversaturation found in more aggressive presets. However, as is often the case without full calibration, no two units are identical. In our test the white balance was slightly lacking in blue, causing the image to lean a little towards warmer, yellowish tones. This was most noticeable in bright scenes, such as the snowy sequences from Star Wars. Additionally, the gamma curve was slightly low at 2.2, which produced a minor lift in shadow detail. In HDR mode the tuning was somewhat better, showing only a slight undersaturation in the red region.

Fortunately, with professional calibration, most of the Bravia 9 II’s factory missteps can be effectively eliminated. We managed to precisely correct, above all, the white balance and the gamma curve and EOTF. After these procedures, in everyday use and during film viewings the television looks worlds better. The picture gained proper depth and modelling, the cool tint to whites disappeared, and shadow detail that previously vanished because of an overly high gamma finally became perfectly visible. Although we ultimately rate colour accuracy as very good, as specialists we must point out one fairly serious design flaw in this model. The Bravia 9 II could look even better if it were not for the complete lack of an advanced colour management system in the television’s menu.

While a basic white balance correction can be carried out here without difficulty, the settings lack options for adjusting specific colours. We tried to tackle this issue in every possible way, both with the traditional method from the remote and via dedicated calibration software for Bravia televisions. Unfortunately, that function has been completely locked. We suspect this may stem from the specifics of the new RGB architecture, which imposes its own limitations. It’s a great shame, because without it you cannot push colour reproduction to perfection. A skewed red still catches the eye. One can only hope that Sony will fix this shortcoming in time via an update.

After a full calibration it’s fair to say the S90H in WOLED guise looks almost perfect. In SDR mode colour inaccuracies drop to ultra-low levels and Delta E values very rarely exceed 2. That’s a phenomenal result, so if you care about perfectly faithful colour reproduction it’s definitely worth considering calibration. The calibrated HDR mode also performs very well, with the white balance stabilised and earlier deviations eliminated. After professional fine-tuning it’s really hard to find anything to criticise, because the TV delivers an image with almost reference-level naturalness and three-dimensionality. The slightly lower score in this category compared with the QD-OLED variant is solely due to the aforementioned limitation in saturation in extremely bright scenes; the tuning options and colour fidelity themselves are at the highest level.

Digital processing and upscaling have long been Sony’s hallmark, and after testing the Bravia 9 II we can confidently say that nothing has changed in that respect. Sony remains at the forefront of the market. Their proprietary XR image processor, which in this model works alongside the main MediaTek Pentonic 1000 chip, deserves the highest praise. That combination delivers excellent results. The upscaling of lower-resolution material itself is extremely effective and precise. However, what most deserves applause in the XR processor’s operation is its tonal transition smoothing function. The system can reduce posterization in heavily compressed material to virtually zero. Crucially, the algorithm does this in a very intelligent way. It removes only the annoying digital “steps” in gradients without blurring fine texture details or creating an artificial, “plastic” look stripped of film grain. The picture remains sharp, natural and cinematic.

In terms of posterisation reduction itself, Samsung has kept the solutions known from last year’s models. The dedicated gradient-smoothing function performs quite well and can effectively mask unwanted tonal banding, which is useful on a WOLED panel that is slightly more prone to banding. However, you should be aware of its aggressive behaviour. This mechanism, alongside the artefacts themselves, can clean up fine film grain and gently soften detail. Ultimately it is a matter of compromise, but if you want an absolutely faithful reproduction, it is safer to leave this option off.

Similarly, in the area of scaling it is difficult to call this a breakthrough. The S90H uses the same NQ4 Gen3 processor as its predecessor, so the upscaling quality was almost identical. The chip sharpens lower-resolution material very well, extracting a satisfying level of detail. Samsung still has not dealt with the longstanding overscan issue, though. With some older recordings or archive footage the edges of the image can be slightly cropped. It’s a minor flaw, but it’s a pity the manufacturer still hasn’t eliminated it.

In the Sony Bravia 9 II specification you won't find very high screen refresh rates above 120 Hz, which some more demanding PC gamers may regard as a drawback. However, in everyday use, whether during movie viewing, console gaming or watching sport, it's really hard to have any complaints about motion smoothness. The VA-type panel used here does show slight smearing, natural for this panel type, but the excellent Motionflow motion smoothing algorithms come to the rescue. In the system menu you'll find sliders for blur reduction and smoothing that let you precisely tailor the motion characteristics to your own preferences.

In terms of motion handling, the S90H is simply excellent. This year's panel offers a boosted refresh rate of up to 165 Hz, though in practice the benefit will mainly be for gamers connecting a high-end PC. For films, series or sports broadcasts such a high refresh rate makes no difference and the picture looks exactly the same as at the standard 120 Hz. Regardless of the source, however, the OLED panel's lightning-fast response time does its job, so motion is clean and the ghosting or smearing familiar from LCD screens simply does not occur here.

Aside from a fairly serious design misstep in limiting the platform to just two full HDMI 2.1 ports, the Bravia 9 II offers almost all the key gaming features available on the market. Sony has already accustomed us to such a rich feature set in its previous models. The list of supported technologies is extensive. It includes automatic low-latency mode (ALLM), variable refresh rate (VRR), and a fully correct implementation of the HGIG standard and the Dolby Vision format tailored for gamers.

Players should feel at home with the S90H, because Samsung has left few reasons to complain in that respect. The TV has four HDMI 2.1 ports, each of which supports VRR, ALLM and high refresh rates. There’s also the Game Bar, a handy menu that lets you quickly check key parameters and change settings without leaving the game. Importantly, Samsung has also improved HGiG mode. In last year’s models it could cause problems when used with a console, but on the S90H it now works as it should. What really stands out against the competition is the Game Motion Plus feature. It’s a special motion smoothing mode for games that works best with titles running at 30 or 60 fps. Motion becomes noticeably smoother, while latency remains at a reasonable level. In our measurements it was under 50 ms, so gaming is still comfortable. That’s important, because on many TVs enabling a similar smoothing feature causes such a large increase in input lag that controls become noticeably sluggish. Samsung has managed to find a good compromise here. There’s still no Dolby Vision Gaming, but in practice Game Motion Plus may prove to be a much more useful feature.