Sony Bravia 8 (XR80) vs Philips PUS7000

Sony Bravia 8 performs reasonably well in terms of HDR brightness. A maximum brightness level of 880 nits is satisfactory and allows for enjoyable light effects in most scenes. In the tested segments of the films Life of Pi and Sicario 2, the television looks really good, offering vibrant and detailed images that fully convey the atmosphere of these productions.

However, a greater challenge is presented by a scene from the film The Meg, where the screen is entirely very bright. In such situations, the limitations of OLED technology are evident, as the television loses brightness, dropping to about 450 nits. This decline is less satisfactory, especially when the entire scene requires intense lighting. Despite these limitations, Sony Bravia 8 remains a competitive model, offering excellent coverage of the DCI-P3 colour gamut and a BT.2020 standard coverage of 74%. As a result, colours are rich and details are precise, which significantly enhances the quality of HDR content consumption and makes viewing a pleasant experience.

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The best factory mode available on the Sony Bravia 8 television is IMAX Enhanced, which provides the most cinematic experience, although it is not perfectly set up. The television tries to faithfully reproduce cinematic settings, but certain shortcomings are noticeable. Starting with the white balance, both for SDR and 4K materials, a pronounced blue tint can be observed. This causes the image to appear too cold, stripping it of its naturalness. Tests using Colour Checker show that colours shift towards cooler tones, which may affect the accuracy of colour reproduction and make the image less realistic.

As for brightness and contrast characteristics, the gamma shows a significant drop at the end of the chart. This means that dark details may be too dark and bright elements too bright, resulting in a loss of subtlety and becoming less visible. As seen in the sky - in the comparative photo. In turn, the EOTF curve is well above the reference value, causing bright elements of the image to be too intense. As a result, users may perceive the image as unnatural, and bright areas may lose details, negatively impacting the overall viewing quality.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

The calibration process of the Sony Bravia 8 television has brought significant improvements in image quality. The white balance has been noticeably enhanced, for both SDR and 4K HDR content, with minimal errors in the middle of the graph. Gamma has proven to be one of the biggest beneficiaries of calibration – it has been completely rid of previous dips, which has significantly impacted brightness stability and better detail reproduction in the darker parts of the image. The EOTF curve has also been levelled, making bright elements of the image appear more natural, and the overall tonal dynamics are now more balanced.

However, the most attention should be paid to colour reproduction, where, despite calibration, certain issues still persist. Sony has omitted the use of a CMS system in this model, which allows for very precise control over colours. As a result, the Colour Checker test for 4K materials still shows significant errors in colour samples. Despite these difficulties, we recommend performing calibration, as the effects are noticeable and significantly enhance image quality, particularly in terms of brightness and contrast.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

The fluidity of tonal transitions in low-quality materials on the Bravia 8 is poor. Unfortunately, the soft gradation feature (which was available in previous models) is missing, which is a significant downside. The digital noise reduction feature can considerably improve tonal transitions; however, it also tends to remove some details, such as clouds in scenes from the film The Martian, which may not be to everyone's liking. As for digital processing, the Sony XR80 performs quite well. The model in test scenes was displayed without noticeable errors, and the branches in the background are not overly jagged. This shows that the Bravia 8 is capable of effectively processing complex low-resolution image details.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

Sony Bravia 8 offers a maximum refresh rate of 120 Hz, which forms the basis for smooth viewing of dynamic content such as sports and games. This ensures that movements are sharp and fluid. For more demanding users, the Sony XR80 television is equipped with an advanced motion smoothing system, which is divided into three segments: Smoothness (Film), Smoothness (Camera), and Clarity. The first two are responsible for regulating the degree of blur and smoothness of the image. The third option, concerning clarity, will be described in more detail below. Each of the parameters can be adjusted to personal preferences, allowing users to find the optimal setting tailored to their individual needs.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

Sony Bravia 8 has significantly improved its compatibility with consoles compared to earlier models. The television supports variable refresh rate (VRR), which eliminates screen tearing, and it synchronises with graphics cards to ensure smooth image display. The automatic low latency mode (ALLM) reduces input lag, which is crucial in fast-paced games. Dolby Vision with low latency additionally provides impressive HDR effects that look stunning during gameplay.

The Sony XR80 television also features a Game Bar, allowing quick access to settings and monitoring parameters while gaming. An interesting option is the ability to enable a virtual crosshair on the screen, which can provide a slight edge in shooting games.

A downside is the lack of support for 1440p@120hz resolution, which could facilitate gaming for users with less powerful graphics cards. Additionally, the Sony XR80 only has two HDMI 2.1 ports, one of which is typically used to connect an audio system via eARC, limiting the number of available inputs for connecting next-generation consoles.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.