Sony Bravia 8 (XR80) vs Haier Q80FUX

Sony Bravia 8 performs reasonably well in terms of HDR brightness. A maximum brightness level of 880 nits is satisfactory and allows for enjoyable light effects in most scenes. In the tested segments of the films Life of Pi and Sicario 2, the television looks really good, offering vibrant and detailed images that fully convey the atmosphere of these productions.

However, a greater challenge is presented by a scene from the film The Meg, where the screen is entirely very bright. In such situations, the limitations of OLED technology are evident, as the television loses brightness, dropping to about 450 nits. This decline is less satisfactory, especially when the entire scene requires intense lighting. Despite these limitations, Sony Bravia 8 remains a competitive model, offering excellent coverage of the DCI-P3 colour gamut and a BT.2020 standard coverage of 74%. As a result, colours are rich and details are precise, which significantly enhances the quality of HDR content consumption and makes viewing a pleasant experience.

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

The best factory mode available on the Sony Bravia 8 television is IMAX Enhanced, which provides the most cinematic experience, although it is not perfectly set up. The television tries to faithfully reproduce cinematic settings, but certain shortcomings are noticeable. Starting with the white balance, both for SDR and 4K materials, a pronounced blue tint can be observed. This causes the image to appear too cold, stripping it of its naturalness. Tests using Colour Checker show that colours shift towards cooler tones, which may affect the accuracy of colour reproduction and make the image less realistic.

As for brightness and contrast characteristics, the gamma shows a significant drop at the end of the chart. This means that dark details may be too dark and bright elements too bright, resulting in a loss of subtlety and becoming less visible. As seen in the sky - in the comparative photo. In turn, the EOTF curve is well above the reference value, causing bright elements of the image to be too intense. As a result, users may perceive the image as unnatural, and bright areas may lose details, negatively impacting the overall viewing quality.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

The calibration process of the Sony Bravia 8 television has brought significant improvements in image quality. The white balance has been noticeably enhanced, for both SDR and 4K HDR content, with minimal errors in the middle of the graph. Gamma has proven to be one of the biggest beneficiaries of calibration – it has been completely rid of previous dips, which has significantly impacted brightness stability and better detail reproduction in the darker parts of the image. The EOTF curve has also been levelled, making bright elements of the image appear more natural, and the overall tonal dynamics are now more balanced.

However, the most attention should be paid to colour reproduction, where, despite calibration, certain issues still persist. Sony has omitted the use of a CMS system in this model, which allows for very precise control over colours. As a result, the Colour Checker test for 4K materials still shows significant errors in colour samples. Despite these difficulties, we recommend performing calibration, as the effects are noticeable and significantly enhance image quality, particularly in terms of brightness and contrast.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

The fluidity of tonal transitions in low-quality materials on the Bravia 8 is poor. Unfortunately, the soft gradation feature (which was available in previous models) is missing, which is a significant downside. The digital noise reduction feature can considerably improve tonal transitions; however, it also tends to remove some details, such as clouds in scenes from the film The Martian, which may not be to everyone's liking. As for digital processing, the Sony XR80 performs quite well. The model in test scenes was displayed without noticeable errors, and the branches in the background are not overly jagged. This shows that the Bravia 8 is capable of effectively processing complex low-resolution image details.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

Sony Bravia 8 offers a maximum refresh rate of 120 Hz, which forms the basis for smooth viewing of dynamic content such as sports and games. This ensures that movements are sharp and fluid. For more demanding users, the Sony XR80 television is equipped with an advanced motion smoothing system, which is divided into three segments: Smoothness (Film), Smoothness (Camera), and Clarity. The first two are responsible for regulating the degree of blur and smoothness of the image. The third option, concerning clarity, will be described in more detail below. Each of the parameters can be adjusted to personal preferences, allowing users to find the optimal setting tailored to their individual needs.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

Sony Bravia 8 has significantly improved its compatibility with consoles compared to earlier models. The television supports variable refresh rate (VRR), which eliminates screen tearing, and it synchronises with graphics cards to ensure smooth image display. The automatic low latency mode (ALLM) reduces input lag, which is crucial in fast-paced games. Dolby Vision with low latency additionally provides impressive HDR effects that look stunning during gameplay.

The Sony XR80 television also features a Game Bar, allowing quick access to settings and monitoring parameters while gaming. An interesting option is the ability to enable a virtual crosshair on the screen, which can provide a slight edge in shooting games.

A downside is the lack of support for 1440p@120hz resolution, which could facilitate gaming for users with less powerful graphics cards. Additionally, the Sony XR80 only has two HDMI 2.1 ports, one of which is typically used to connect an audio system via eARC, limiting the number of available inputs for connecting next-generation consoles.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.