Sharp GR8 vs Sony BRAVIA 7 II

Sharp GR8 in its promotional materials boasts of "very high brightness" at a level of 500 nits. Unfortunately, our tests showed that the reality is somewhat different – the average luminance value we managed to achieve was around 360 nits. This is rather an average result, especially in the context of the manufacturer's claims. Such brightness does not allow for a full enjoyment of HDR effects. The image is a bit more defined than in standard SDR, but it is difficult to speak of true richness and depth in bright elements here. However, praise is due for the DCI-P3 colour gamut coverage at a level of 95%. This is a result of the application of an additional PFS layer, known from QLED technology. As a result, the colours are vivid and have a pleasant, natural tone, which somewhat compensates for the deficiencies in brightness.

The Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode, Professional, we measured around 2,000 nits of peak brightness, so the panel’s capabilities are truly significant. Of course, with Mini-LEDs a test pattern result is only part of the story, because a lot still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform very well. Depending on the scene, the brightness we measured in films ranged from roughly 1,100 to as much as 1,700 nits. That’s already a level at which HDR has proper punch and bright highlights can be genuinely impressive. It isn’t perfect in every situation, though. With small bright elements on a very dark background the Bravia 7 II clearly favours maintaining good blacks, which can cause their brightness to drop to around 500 nits. It still looks good, but you can see the TV does not always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is precisely where True RGB technology was meant to bring one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured about 98% DCI-P3 coverage and 88% BT.2020, so the potential to show strongly saturated colours is really large. In RGB TVs, however, the situation is a bit more complex. When we repeated the same measurements with a film background applied, palette coverage fell to around 92% DCI-P3 and 78% BT.2020. Those are still good figures, especially for an RGB Mini-LED TV, but they clearly show that the final result largely depends on how the algorithms control the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain high saturation. The biggest differences are visible in shades of blue, where samples begin to deviate more noticeably from reference values and coverage is weaker than for the other primary colours. True RGB therefore offers genuinely greater potential here, but, as with brightness, much depends on what is happening on screen.

At the outset, it is worth noting that colour reproduction tests are always conducted in the best factory picture mode. In the case of Sharp GR8, this is the “Film” mode. As for white balance, which affects how we perceive colours on the screen, in SDR mode, there is an immediate noticeable dominance of blue. This results in an unnatural cooling of the image – blue elements take on a purple hue, and skin tones acquire a pinkish glow, as we can see in the comparative photo from the film STAR WARS. During the Color Checker test, it was clear that the colour samples deviated from the reference values, confirming considerable errors in colour reproduction. The gamma was also not ideal – it caused excessive brightness throughout the entire image, resulting in a lack of depth and appropriate tonal transitions in the scene.

In 4K HDR mode, the situation looks significantly better. The dominance of blue is much less noticeable, although there are minor issues with the combination of red and blue. This causes some shades to appear somewhat unnatural. The EOTF curve, responsible for the brightness of the image in 4K HDR content, revealed another problem – the television tends to excessively dim the image across the entire surface of the screen.

In summary, the “Film” mode in Sharp GR8 would require a few adjustments to fully utilise the potential of this television. Fortunately, we took care of that and proceeded with calibration.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available settings. However, it is not perfect. In SDR the white balance drifts slightly towards magenta, making some scenes look a little warmer and less neutral than they should. A bigger problem is the gamma, which sits closer to 2.5 than to 2.4. This makes the image a bit too dark in places, particularly in the midtones. In HDR the situation is better. As brightness increases a little too much red appears, but this is not an issue that is highly noticeable during viewing. Overall the Professional mode is a good starting point, although you can get a bit more out of it after calibration.

Sharp GR8 is one of those televisions that truly gains a second life after proper calibration. Both in HD and 4K content, the white balance performs very well, especially when considering the price segment of this model. The image becomes much more aligned with what the director intended to show – colours look natural, and skin tones acquire the appropriate depth and warmth. The brightness characteristics also make a very positive impression. Both gamma and the EOTF curve display really solid values. While minor imperfections can be noticed, they are subtle enough that they are difficult to detect during everyday viewing. In summary, calibration allows the Sharp GR8 to showcase its best features, offering an image that is not only pleasant to the eye but also faithfully reflects the creators' intentions.

After calibration the Bravia 7 II can look decidedly better. Above all, we managed to set the white balance very well, both in SDR and HDR. Gamma can also be improved, which after correction runs very close to the reference value. And in fact, for most users these changes will have the greatest impact on the picture. There is, however, a limitation when it comes to the colours themselves. In the Bravia 7 II Sony does not provide access to a classic CMS that would allow us to correct individual hues separately. A lot is therefore left in the hands of the algorithms controlling the True RGB backlight. If the TV misrepresents a particular colour, we are not always able to do anything about it. In our measurements this is most visible in certain reds and blues, where errors can still be quite large. This does not, however, undermine the point of calibration itself. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference compared with the factory settings is noticeable.

Sharp GR8 has been equipped with the "10-bit colour reproduction" feature, which theoretically should improve the smoothness of tonal transitions. In practice… well, the effect is surprising, but not in a particularly positive way. Even at the highest settings, it is difficult to notice any impact on the actual tonal transitions. Instead, the feature surprisingly smooths out what it shouldn't – walls, shirts, or other flat surfaces look almost like they have been freshly ironed. In the test, we had to note that there is simply no actual impact on tonal transitions.

As for image scaling, here Sharp GR8 performs significantly better. The television can give the image a plastic, smooth characteristic, meaning even lower resolution content looks quite good. Of course, with more demanding details, such as thin tree branches in the background, one can notice slight jaggedness, but it is not something that would significantly affect viewing comfort.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of the bigger reasons to choose Sony over the competition. The manufacturer has been handling digital image processing well for years, and it shows here too. First and foremost, the 'Smooth Gradation' function works very well and can smooth out weak tonal transitions in lower-quality material. The safest setting is Low, but we would comfortably recommend Medium as well. The effect is stronger then, yet the TV still treats details very gently. Some fine details may be slightly smoothed, but Sony does this much more subtly than many other brands. The upscaling itself also performs very well. Lower-resolution material is well upscaled to 4K, the image looks clean and retains a lot of detail. Of course the TV will not magically turn native HD material into true 4K, but what can be extracted from such a source is handled really well by the Bravia 7 II.

This is where Sharp GR8 has the chance to stand out from the competition in its price segment. The television is equipped with a 144 Hz refresh rate panel, which is an impressive achievement, especially if we plan to use it for dynamic content such as action films, sports broadcasts, or video games. Additionally, the manufacturer has ensured the presence of motion smoothing technology, commonly referred to as a “smoothness enhancer.” The user has three levels of adjustment at their disposal, allowing them to tailor the effect to their own preferences – from subtle smoothing to a more aggressive intervention in the smoothness of the image. This is a nice addition, particularly for those who mainly watch films and care about smooth, cinematic sequences without irritating stutters or frame drops.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you would expect from a TV of this class. With sport or games at 120 fps, the picture is suitably smooth, and for films Sony provides an extensive motion interpolation system. You can therefore adjust the interpolation level separately and decide whether you want to preserve a more cinematic character to the motion or obtain noticeably smoother movement. The issue of motion blur itself is a little worse. The VA panel used is not among the fastest, and you can notice a slight trail behind moving objects, particularly on darker backgrounds. It is not at a level that greatly bothers during normal viewing, but last year’s Bravia 7 fared better in this respect and had a noticeably faster panel.

If the television has a 144 Hz panel and two full HDMI 2.1 ports, it is clear that it has been designed with gamers in mind. The Sharp GR8 offers exactly that – high refresh rates and the appropriate connections that will allow you to get the most out of modern consoles and PCs. It also features ALLM, which automatically switches the television to low latency mode, and VRR, which ensures the image does not stutter even during more demanding moments. In practice, everything works as it should, and it is hard to find fault with anything. However, there are some shortcomings. It lacks support for HGiG, which is a feature that better adjusts HDR for games, as well as Game Bar, which makes it easier to quickly adjust settings without leaving the game. Despite these drawbacks, the Sharp GR8 is truly a solid option for gamers.

Bravia 7 II has basically everything you’d expect today from a good console TV. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to a low-latency mode. It also has properly working HGiG, which means that after configuring HDR on the console the TV won’t try to brighten the image further on its own. You just need to remember to turn off tone mapping in the TV’s menu. Dolby Vision in game mode is also a plus, especially useful for Xbox owners. Sony adds its own Game Menu. From it you can quickly check key signal information, verify VRR operation or change gaming-related settings without digging through the whole TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz.

Our biggest reservation is not really about the functions themselves, but about the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 at 48 Gbps. One of those is also an eARC port. So if you connect a soundbar or AV receiver to the TV via HDMI, in practice you’re left with only one full HDMI 2.1 for a console or PC. With a single console that’s no problem, but with a PS5, an Xbox and an audio setup it starts to get tight. And this is hard to excuse for Sony. In cheaper TVs two HDMI 2.1 ports can still be acceptable, but in a model of this class, especially in 2026, we would expect a full set of four such ports.