Sharp GP7 vs Sony BRAVIA 2 II (S25M2)

In terms of HDR, Sharp GP7 can pleasantly surprise us. A maximum brightness of around 500 nits is the threshold at which the real benefits of high dynamic range become visible. During our tests, we achieved stable values between 430 and 500 nits, which translated to clearer differentiation of elements in both bright and slightly darker scenes. Additionally, the DCI-P3 colour space coverage was around 95%, allowing for vibrant, visually pleasing colours. Of course, this is not the highest league, but considering this price range – it’s a big plus.

The Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is clearly too low for the brightest parts of the image to look truly impressive. In practice, HDR here does not differ that much from standard SDR. Bright highlights, the sun or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with standard SDR content, and in that use its limited brightness will be least noticeable.

Colour gamut coverage

The Sony Bravia 2 II is also not impressive in terms of colour. The TV does not use any additional gamut‑expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements coverage of the DCI‑P3 gamut was about 78%, and the very wide BT.2020 roughly 57%. That's definitely too little to talk about truly saturated colours in HDR material. More intense reds, greens or turquoises will simply be less striking than on TVs with an expanded colour gamut. The Bravia 2 II therefore performs much better in the Rec.709 standard, the gamut used for films, series and television in SDR.

Upon removing it from the box, in movie mode, GP7 does not perform poorly at all. In HD materials, we noticed slight disturbances in white balance – drops in red and blue, which made the image have a somewhat greenish hue. This is evident, for example, on the faces of characters, which become less three-dimensional. The gamma is somewhat brightened in places, resulting in less deep blacks. In 4K HDR content, a cooler, bluish tone additionally comes to the fore, making the colours appear less natural. On the other hand, looking from the perspective of "straight out of the box," these settings are not bad – only minor adjustments are needed, and with the help of specific tools, we will try to improve them.

The out-of-the-box colour reproduction in Cinema mode was actually quite good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colours shifted to slightly warmer, at times faintly pinkish, tones. However, this wasn’t a major fault and during normal viewing the picture still looked fairly natural. There was a bit more happening with image brightness. Looking at the gamma curve, you can see Sony doesn’t stick perfectly to the reference value. The darkest areas are slightly lifted, while as brightness increases the gamma gradually rises and a larger part of the picture becomes darker than it should. That said, it’s not such a large difference as to be very distracting in everyday viewing. Overall, SDR straight out of the box performs quite respectably.

The situation is considerably worse in HDR. We’ve already mentioned the limited colour gamut, but in addition the Bravia 2 II noticeably manipulates image brightness here. The EOTF curve sits below the reference value for a large part of its range, which means the TV renders most mid and brighter parts of a scene darker than the source material intends. Only towards the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks much brightness, but can also simply look too dark.

Calibration really makes a difference in Sharp GP7. After making adjustments, we achieved a better white balance in HD content, and the colours began to appear much more natural, with minimal deviations and without a noticeable dominance of individual hues. In 4K HDR, the change is not as spectacular, but still noticeable. The gamma has been brought to a more neutral level, although there remains an issue with a slight boost in the brightest details on the screen. The lack of control over dynamic tone mapping limits our manoeuvrability, but nonetheless, it is a significant step forward compared to the factory settings.

Calibration did a lot for the Bravia 2 II, particularly with SDR content. Above all, we managed to even out the white balance and tidy up the gamma, which now follows the reference value much more closely. As a result, the image no longer has the previous pink cast, and the brightness across different areas is much better organised. You can also see this in the colour errors, which after calibration fell to a very low level (with slight issues in the most saturated reds). We also partially managed to rein in the Bravia 2 II in HDR, especially in the way the television handles image brightness. However, there is one thing no calibration can fix: the capabilities of the panel itself. A narrow colour gamut means the television is physically unable to reproduce the most saturated colours present in HDR material. On top of that, the low contrast of the IPS panel means darker scenes are veiled by a grey haze, which robs colours of some of their depth. So we can improve how the Bravia 2 II makes use of its capabilities, but unfortunately we cannot overcome the panel's inherent limitations.

The television is quite capable of scaling lower quality content. Our test patterns were well reproduced, and although there was minimal banding on fine, delicate shapes (for example, thin branches), it still looked satisfactory. Additionally, Sharp GP7 offers a "10-bit colour reproduction" feature to smooth tonal transitions in poor quality materials. It is useful, but at the cost of some details, so we recommend turning it on only when we are truly watching something subpar.

The upscaling on the Bravii 2 II is quite good and, in that respect, the TV matches the standard Sony has set. Lower-resolution content is sensibly upscaled to 4K, and the image is slightly smoothed in the process without excessive edge sharpening. The situation is worse when it comes to improving footage with visible compression artefacts. This is handled by the "Digital Noise Reduction" function, which at the "High" setting can indeed smooth out some unpleasant tonal banding. The problem is that it does this rather aggressively and, along with the imperfections, it also removes a lot of fine detail, including natural film grain. What is more, when there is more motion on screen its effectiveness drops sharply and any improvement is then minimal. For everyday use we therefore tended not to use this function.

With a 60 Hz panel and an average response time, it’s hard to expect miraculous smoothness. In dynamic tests, such as the one with the “little green man”, it’s evident that the picture can stutter and occasionally lose sharpness. For watching films and series, this is acceptable, especially as you can make use of a motion smoother with three levels of adjustment. However, if we are keen on ultra-smooth sports broadcasts or super-responsive gaming, we may feel unsatisfied.

Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, bear in mind that it is a basic panel and its limitations are already clearly visible, especially during sports. The TV cannot interpolate 50/60 fps material to a higher refresh rate, so it cannot further improve the sharpness of fast-moving objects. For films and series, however, it offers a conventional motion smoothing feature that can reduce the characteristic judder of material shot at 24 fps.

Let's not kid ourselves – GP7 Sharp is not a television for the most demanding console gamers. Yes, it has ALLM which automatically switches the TV to low latency mode, but it lacks VRR or G-Sync. We also won't find any advanced menu to assist in selecting settings during gameplay. Dolby Vision in games? It's there, but with such a high input lag that it's hard to speak of comfort. If we play occasionally and are not aiming for the highest standards, it can be managed, but fans of technological innovations will be disappointed.

The Bravia 2 II is not a television that lends itself well to gaming, and the list of features shows that quite quickly. You essentially only get the automatic low-latency mode ALLM and a simple Game Bar that lets you view basic signal information and change a few settings. But that is where the list of strengths ends. The TV does not support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It is suitable for occasional console gaming, and thanks to low input lag controls remain responsive, but if someone is looking for a TV primarily for games, the Bravia 2 II will simply be a rather limited choice.