Samsung U8000F (VA) vs Sony Bravia 3 50' (VA)

While the U8000F with a VA panel can still be praised for decent blacks, there is no longer any reason to be enthusiastic about brightness – especially in HDR scenes. The television achieves a maximum of just under 250 nits, which is simply too low to speak of any impressive light effects. Bright elements appear pale, and scenes that should sparkle look rather flat. We observed an interesting situation during the test of a scene from the film Sicario 2 – the screen became noticeably darker, as if the television was trying to hide its limitations in displaying blacks. One might get the impression that the device artificially darkens the image to enhance contrast, but in practice, the effect makes very little difference, other than the fact that we see less on the screen. Furthermore, there is the issue of colours – the U8000F does not support a wide colour gamut, so one cannot count on the vibrant, saturated hues known from better models. The HDR image here resembles slightly brightened SDR and... perhaps that is even a good thing. With this model, it is not worth expecting a cinematic experience – it is better to treat HDR as a modest addition.

Interestingly, the 50-inch version of the Bravia 3 performs slightly better in terms of brightness than its larger variants. In measurements, it achieved around 370 nits, which still does not compete with top-tier televisions, but is sufficient to suggest a semblance of HDR effect. For some users, this level will be acceptable, while others will view it as typical for SDR content, where striking highlights or strong contrasts are not expected. It must be clearly stated that the Bravia 3 is not a television for those looking to extract the maximum quality from the most challenging film materials.

This does not mean, however, that everything performs averagely. Sony has equipped this model with an additional PFS filter, which works similarly to solutions used in QLED televisions. As a result, the coverage of the DCI-P3 colour gamut has increased to over 91 percent. In everyday use, this means more vivid, saturated colours and also a more pleasing image texture. Even though it lacks strong lighting effects, films and series can look significantly more appealing than with its predecessor, the X75WL.

The Samsung U8000F has been tested by us in the best picture mode it offers out of the box – the Filmmaker Mode. This profile is theoretically meant to provide a neutral, cinematic image devoid of unnecessary enhancements and artificial beautifications. In the case of SDR content – primarily in HD or SD resolution – the television performed surprisingly decently right out of the box. The only noticeable flaw was brightness management. The gamma chart showed some deviations – slight brightening or dimming of certain tones – but in practice, this did not significantly affect the viewing experience. Considering the television's segment, it performs quite well.

However, the situation is much weaker in HDR mode. While the white balance was still acceptable, the colour inaccuracies were very apparent. In the Color Checker test, almost every sample was outside the target point, and the image itself appeared unnatural – the colours were shifted, sometimes too cool, other times simply dull and lifeless. The main problem lies in the hardware limitations – the U8000F does not support the wide colour gamut of DCI-P3, so it is physically incapable of reproducing the colours that the HDR standard anticipates. Unfortunately, this is evident in almost every more demanding scene.

Sony Bravia 3 was primarily tested in film mode, which immediately proved to be the best choice among the factory settings. It is not an ideal picture, but compared to the eco mode that the television offers right out of the box, the difference is clear and it is a positive one. In film mode, one can notice a certain issue: the image appears too warm, which results from the lack of blue in the white balance. Nevertheless, in SDR content, the final effect can still be regarded as quite decent and satisfying for everyday viewing. Much more serious errors occur in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management, combined with limited colour gamut coverage, further exposes the shortcomings of the image in this mode. All of this means that HDR in the Bravia 3 edition is unconvincing and can spoil the impression left by a quite decent SDR content setup. Fortunately, this is not a hopeless situation. Various errors can be mitigated to some extent, and some can even be completely corrected through professional calibration. Therefore, we decided to check how the television would perform after such adjustments.

Right out of the box, the U8000F offered quite a decent image in SDR for its price class. However, we managed to enhance it slightly – we reduced a subtle purple tint and improved the gamma characteristics, giving it a more natural curve. Despite these adjustments, the television still tends to overly brighten the brightest details – the gamma chart shows a clear inflection that cannot be completely corrected.

In HDR mode, however, it is noticeably weaker. It is hard to speak of any significant improvement here – despite attempts to adjust the settings, the image still presents considerable colour inaccuracies. A Delta E exceeding 7 signifies noticeable deviations that could not be effectively reduced. Unfortunately, this is a limitation of the construction itself – the U8000F simply was not designed for serious HDR. In everyday viewing in SDR, it performs quite well, but when it comes to HDR content... it's best not to have overly high expectations.

Calibration allowed us to extract significantly more from the ChooseTV 3 than we could have expected at first. Firstly, it was possible to address the lack of blue, which had previously caused a noticeable warming of the image. After a slight adjustment to the white balance, most of the errors in the Color Checker measurements for SDR content practically disappeared. The shades of white became more natural, and the brightness management in gamma stabilised to a nearly perfect level, not exceeding the threshold of human eye perception. Therefore, it can confidently be said that in SDR content, after a few adjustments in settings, the ChooseTV 3 performs really brilliantly. Much worse, although still definitely better than before calibration, are the HDR contents. The white balance was brought into order, but the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which is immediately noticeable. Colour-wise, the effect is also improved, although far from ideal – many errors still exceed the threshold of four, or even five delta E units, meaning they remain visible to the human eye. It was already clear earlier that the ChooseTV 3 is not a television designed to impress with HDR quality. Nonetheless, it is pleasing to note that in SDR content, after calibration, the image can look truly excellent, and in this category, the television positively surprised us.

When it comes to how the Samsung U8000F handles lower quality materials, we must admit that Samsung has made progress compared to its predecessor from last year – the DU7192 model, which theoretically occupies the same position in the lineup. This year's model has been equipped with a feature to improve the fluidity of tone transitions, which has been implemented much better than last year. Indeed, the television still utilizes quite strong algorithms that can distort details or remove film grain, but nonetheless – it can confidently be said that it works effectively. However, not everything has gone perfectly. The U8000F has noticeable issues with slightly cutting the image when watching very old content in very low resolution. If someone plans to play their old VHS tape, they must reckon with the fact that the image may appear slightly "cut off".

Bravia 3 brings something more than just a shared name to the Sony television family. It stands out primarily for its ability to enhance the quality of inferior materials thanks to the processor used. Of course, we won't find the advanced XR chip known from more expensive models here, but nevertheless, it's worth noting that the image at lower resolutions looked surprisingly good. The upscaling worked effectively, and most parts of the screen were free from the typical excessive edge tearing characteristic of budget constructions. The feature enhancing the smoothness of tonal transitions is also noteworthy. In the high setting, it performs really well, effectively masking gradation imperfections without significant loss of detail. It does happen, however, that the algorithm overly smooths elements that should remain sharp – for example, faces – but overall, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to those watching lower-quality content.

The Samsung U8000F is equipped with a 60 Hz panel, so it's clear right from the start that one shouldn't expect miracles. This is simply the standard in this class – adequate for everyday viewing, but without any fireworks. The television offers a single motion smoothing slider – a feature called "Motion Blur Reduction," which allows us to adjust the smoothness of the image in films. Higher settings produce a more "theatrical" and smoothed effect, while lower settings help retain the film's original character with a slight 24p effect. An interesting feature is "Clear Motion LED," which is the BFI mode – inserting black frames between image frames to improve motion clarity. In practice, however, the screen flickers heavily when this feature is activated and should rather be considered an experiment than something that genuinely enhances gaming comfort.

The fluidity of motion has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that may appeal to those more sensitive to the way images are displayed. This refers to the proprietary motion smoother, Motion Flow, which offers users a considerable amount of adjustment options. With it, one can make the image smoother, even theatrical, or stick to a more cinematic style with the characteristic judder that many associate with a filmic atmosphere. These functions work with content shot at lower frame rates, such as films and series recorded at 24 or 30 frames per second, which is the kind of material we encounter daily. It is precisely at this point that the motion smoother turns out to be one of the most important features in everyday use of the television, and here the Bravia 3 performs quite well.

Samsung U8000F offers a basic set of features for gamers, which may still be sufficient for less demanding users. It includes an automatic game mode – when a game is launched on the console, the television automatically switches to low latency mode, significantly improving response times. There is also a VRR feature, or variable refresh rate, which operates in the range of 48 to 60 Hz. This means that both Xbox and PS5 will not produce the "tearing" effect – as long as we stay within this range.

Unfortunately, that’s about it for the advantages. Additions like Game Bar or higher refresh rates are reserved for higher-end Samsung models from the 2025 line. In theory, the television also supports the HGiG feature, which should adjust HDR imagery to the creators' intentions. Unfortunately – despite the fact that this feature appears in brochures and promotional materials – its configuration on the Xbox console turned out to be... impossible in practice.

Bravia 3 is not a device for e-sports enthusiasts or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports puts an end to that discussion before it can even begin. This is a television for casual gamers who, after work, will fire up FIFA or racing games, not for someone who measures every frame in a spreadsheet. Nevertheless, Sony has included a few nice extras so that it isn't all so bare. ALLM works as it should, automatically switching the television to game mode (low latency). There's even a simple Game Bar, which is clear and straightforward. However, the biggest curiosity here is the PlayStation Portal app. Thanks to it, you can launch games from the PS5 wirelessly and see them immediately on the television screen. It sounds great, but it only takes a few minutes to feel significant delays. In our opinion, it is more of a showcase of capabilities than something you can use on a daily basis. If someone really wants to play, it is better to connect the console with an HDMI cable and forget about wireless issues.