Samsung U8000F (IPS) vs Hisense A6Q

Better does not mean good – and that is exactly how to summarise the capabilities of U8092F when it comes to displaying bright movie scenes in HDR mode. The brightness of the panel is just under 250 nits, which is definitely too little to enjoy any light effects. An interesting situation was observed during the measurement of the fourth scene from the film Sicario 2 – the television clearly dimmed the entire screen in an attempt to achieve better black levels (which remain weak anyway). One might even suggest that the device is using some form of 'global dimming', but unfortunately – the results are still very poor. To make matters worse, the television does not support a wide colour gamut – the coverage of the DCI-P3 space is around 80%, so one cannot expect truly vibrant colours. The HDR image here looks more like a slightly brightened SDR, and it is this form that we would suggest sticking to when it comes to this television.

The Hisense A6Q is unfortunately difficult to recommend for watching HDR content. The main issues are low brightness and rather modest coverage of a wide colour gamut. The measured brightness of around 300 nits simply isn't sufficient for HDR materials to look impressive. In practice, the picture often resembles standard SDR instead of true HDR with clear differences in brightness and dynamics. Additionally, the colours in such materials do not appear as they should. The television does not utilise additional filters such as QLED or PFS LED, and the coverage of the DCI-P3 colour space at around 80% means that some colours look rather washed out. Consequently, some scenes in HDR materials lose intensity and spectacle, making it difficult to speak of a full HDR experience.

The Samsung U8000F has been tested in the best possible picture mode built into the television, namely Filmmaker Mode. This mode should – at least in theory – offer a cinematic, reference picture without unnecessary enhancements. In the case of SDR content (mainly HD/SD), the television, out of the box, showed itself surprisingly well. Errors in white balance hovered around a value of 3, which is roughly on the edge of perceptibility. The only complaint could be about brightness management – the gamma graph showed a slight tendency to lighten or darken certain sections, but even so, the overall performance is quite good for this price segment.

Unfortunately, it looks much worse in HDR mode. Although the white balance was not terrible, the television had significant colour errors – particularly evident in the Color Checker graph, where almost every sample hit outside the target point. The picture in HDR simply looks unnatural, and the colours can be shifted, dull, or too cool. This largely stems from the fact that the U8000F does not support a wide colour gamut (DCI-P3). The television is physically unable to display correct colours in the HDR standard – and unfortunately, this is felt in every more demanding material.

We conducted the tests in the best available mode, namely Filmmaker, however – as is often the case – this does not mean an ideal image straight out of the box. In the case of Hisense A6Q, this mode clearly "swallowed" too much blue in everyday SDR content. In practice, this led to an image with a yellowed white, particularly noticeable on large, bright surfaces. This is not due to poor assumptions of the Filmmaker mode itself or the vision of filmmakers, but rather the factory settings requiring adjustment.
Furthermore, looking at the saturation characteristics and the gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

Although the U8000F already offered a fairly well-balanced image in SDR straight out of the box, we were able to refine it a bit further. We managed to eliminate a slight purple tint and adjust the gamma to a more sensible level. However, the television still has a tendency to overexpose the smallest and brightest parts of the image – the gamma chart shows a characteristic 'dip' that is difficult to completely straighten out.

Unfortunately, the situation is worse in HDR. It's hard to speak of any significant improvement here – the television is simply not designed for HDR content. We tried to correct the image in the advanced settings, but despite our efforts, the colour errors remained substantial – a delta E above 7 indicates very noticeable deviations. It's a bit disappointing, but that's the nature of budget construction. In SDR, the U8000F performs reasonably well, whereas HDR is just not its league.

The colours after calibration in the Hisense A6Q should be assessed in two ways, as everything depends on the type of content. In the case of SDR material, the effect is truly very good. In everyday programmes, series, and films, it is difficult to spot any serious problems with colours. The yellow tint has been effectively removed, and the television no longer brightens the entire image. As a result, the ColorChecker test showed errors below Delta 2 values, which are already outstanding results, allowing us to speak of very high image quality in standard content. Unfortunately, the situation looks significantly worse in the case of HDR material. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means the television still generates quite significant colour errors. Certain colours simply cannot be displayed by the screen, making them appear less saturated than they should be. It's a shame because even a simple PFS or QLED filter would significantly improve the final effect. The conclusion is therefore simple – the A6Q is really very well suited for SDR content after calibration, while watching HDR content on it should still be approached with caution.

When it comes to how the Samsung U8000F handles lower quality materials, we must admit that Samsung has made progress compared to its predecessor from last year – namely the DU7192 model, which theoretically occupies the same spot in the range.

This year's model has been equipped with a feature that enhances the fluidity of tonal transitions, which has been implemented much better than last year. Yes, the television still uses fairly strong algorithms that can distort details or remove film grain, but despite that – it can be confidently said that it works effectively.

However, not everything has gone perfectly. The U8000F has noticeable issues with slight image stuttering when watching very old content in very low resolution. If someone plans to play their old VHS tape, they must reckon with the fact that the image may appear slightly "choppy".

Upscaling on the Hisense A6Q works quite decently for a television in this price range. Materials of lower resolution are correctly "upscaled" to a higher one, and the image remains clear without artificial edge enhancement or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly worse. In practice, it is difficult to speak of any advanced artifact smoothing or problematic tonal transition masking. In heavily compressed films – especially those from YouTube – the television practically struggles with reducing compression blocks and unwanted banding, making the imperfections in the material clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the quality of the source.

The Samsung U8000F is equipped with a 60 Hz panel, so it's clear from the outset that we shouldn't expect miracles. It's simply the standard in this class – sufficient for everyday viewing but without any fireworks.

The television offers a single motion smoothing slider – a function called “Motion Blur Reduction”, which allows us to adjust the smoothness of the image in films. Higher settings provide a more “theatrical” and smoothed effect, while lower settings maintain the original character of the film with a slight 24p effect. An interesting feature is “LED Clear Motion”, which is a BFI mode – that inserts black frames between frames of the image to improve motion clarity. However, in practice, the screen flickers quite a bit when this feature is activated, and it should be regarded more as an experiment than something that genuinely enhances the comfort of gaming.

The motion fluidity of the Hisense A6Q is… well — quite mediocre. It’s a television with a native refresh rate of 60 Hz in 4K, which means that the motion of objects on the screen doesn’t always look perfectly smooth. In dynamic scenes in movies or sports, it’s clear that this isn’t the strongest feature of this model. The situation improves significantly with 1080p content when connecting a console or computer, as the A6Q can operate even at 120 Hz then. This is a big plus, especially for gamers. Nevertheless, the clarity of motion still leaves much to be desired; blurring is noticeable, and the response time of the panel indicates that it is not one of this television’s strong points.

Samsung U8000F offers a basic set of features for gamers, which can still prove sufficient for less demanding users. We have an automatic game mode here – upon launching a game on the console, the television automatically switches to low latency mode, significantly improving response time. We also find a VRR feature, or variable refresh rate, which operates in the range from 48 to 60 Hz. This means that both Xbox and PS5 will not produce a tearing effect on the image – provided, of course, that we stay within this range.

[UPDATE] We have updated our tests of Samsung televisions from the 2025 model year due to the release of software version 1131, which restored the crucial gaming feature HGiG.

And unfortunately, that’s about it in terms of advantages. Additions like Game Bar or higher refresh rates are reserved for higher models of Samsung from the 2025 line. In theory, the television also supports the HGiG feature, which should adjust HDR image to the creators' intentions. Unfortunately – despite the fact that this feature appears in promotional brochures and retail materials – its configuration on the Xbox console has proven to be... impossible in practice.

For such an inexpensive television, the Hisense A6Q can truly surprise with what it offers to gamers. It operates in 4K only at 60 Hz, but when a game switches to performance mode and drops to 1080p, the panel can work even at 120 Hz. This is a significant advantage in this price range, as most titles on consoles don't achieve stable 4K at 120 frames per second anyway. In practice, we are realistically playing at 1080p, and here the A6Q provides very enjoyable gaming experiences. On top of that, there are several features usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so there's no need to dig through the entire menu. For such an affordable piece of equipment, it's a really solid set for gamers — perhaps not for the most demanding, but certainly spot on for occasional gaming.