Samsung The Frame Pro vs Samsung R95H Micro RGB

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a respectable result for a lifestyle model. In full-screen scenes, such as the board from the film The Meg or the initial sequence in Life of Pi, brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and convey their cinematic magic. However, the situation becomes complicated when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not manage these well. Sometimes, small elements are overly dimmed, which weakens the effect, or conversely – they are significantly brightened, but at the cost of losing the depth of black in that part of the image. This can be compared to light beams reminiscent of a laser beam spreading in dense fog – the effect is noticeable and bright, yet at the same time, it is quite unnatural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), colours are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. Generally, films or series watched in HDR on The Frame Pro showcase a rich colour palette, even if contrast and the functioning of the dimming algorithms can sometimes distract us.

In terms of brightness the Samsung R95H shows that it is still a high-end TV, although the results are not always as spectacular as one might expect from a flagship Micro RGB model. In synthetic tests the TV can exceed 2400 nits, so it clearly has plenty of headroom. Crucially, it can maintain high brightness even when bright elements occupy a larger portion of the screen. In real cinematic scenes the situation is a little more complex. The R95H most often reaches around 1000–1400 nits, which still delivers a very good, powerful HDR effect. Bright sun, reflections or lights can look genuinely impressive, and the TV has enough power for HDR to be clearly distinguishable from standard SDR.

The problem appears mainly in very dark scenes with single, small light sources. Here the local dimming algorithm prioritises deep black and reducing halo over maximising the brightness of such elements. As a result, small highlights can be noticeably dimmed. Overall HDR therefore performs well, but not without limitations. The R95H has huge brightness headroom, especially in larger and brighter parts of the image, but in difficult dark scenes its capabilities are primarily limited by the way local dimming operates.

Colours

Colours were supposed to be the biggest revolution brought by RGB backlighting, and indeed the R95H shows considerable potential here. The assessment is not, however, as simple as synthetic measurements alone might suggest. On test patterns the TV performs superbly – BT.2020 coverage reaches almost 94%, and DCI-P3 98%, so particularly strongly saturated reds and greens can look truly impressive. The situation shifts somewhat when, instead of test patterns, we start measuring real film scenes. Then BT.2020 coverage falls to about 87%, and DCI-P3 to 93%. It seems that with more complex images the RGB zones are not always able to maintain the same high colour saturation as on simple charts. They remain saturated, but the advantage of the new backlight is no longer as large as the manufacturer’s figures might suggest.

We achieved the best results, of course, in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the type most commonly viewed – The Frame Pro performed really well. The white balance and gamma were almost perfectly matched, giving the image a natural and cohesive appearance. Admittedly, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed-up" character, but this didn’t significantly detract from the viewing experience in everyday use. For HDR content, the situation was similar regarding the white balance. This was at a good level; however, the biggest issue turned out to be brightness management. The EOTF curve was set in such a way that in many scenes, the image appeared blown out, with the brightest areas losing detail and turning into uniform patches of light. This severely undermined realism and caused the colours to appear overly sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their televisions, so we opted for calibration, and its results can be seen below.

For assessing factory colour reproduction we naturally chose the Filmmaker mode, the setting that is supposed to be closest to how the picture was intended by the creators. Here, unfortunately, the R95H does not fully exploit the potential of its panel. The biggest problem in SDR concerns the gamma. The image is noticeably brightened across almost the entire range, which makes it lose some depth and look flatter than it should. The white balance itself is also not ideal; as brightness increases there is a red bias and a lack of blue, making the image too warm. This is especially visible in bright elements and skin tones, which can look more "reddish" than they should.

It looks similar in HDR. The EOTF curve is above the reference value for a significant part of the range, so the R95H again brightens the image compared with how it should look. Combined with the inaccurate white balance, this means the colours here are also not as precise as we would expect from a TV of this class. The factory Filmmaker mode is therefore not the R95H's strong suit. At first glance the picture may look impressive because it is bright and highly saturated, but in terms of fidelity to the source material there is still plenty of room for improvement.

After calibration, the SDR mode looks absolutely perfect. We managed to eliminate the overly strong red saturation, which previously gave the image a somewhat excessively warm character. Colours have become more balanced, which resulted in a natural and pleasant reception of everyday content – from television to films and series from streaming or materials on YouTube. In HDR mode, the most work was required on the EOTF curve, which factory settings caused excessive brightening of the entire image. Calibration allowed us to largely "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limitations are set by the design of the television itself, as edge lighting reveals its constraints, and the smallest elements of light can still be overblown or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is significantly more enjoyable to watch, and it is certainly worth considering if you want to maximise the television's capabilities.

The R95H responds very well to calibration. In SDR we managed to set the white balance and gamma almost perfectly, and colour errors fell to a very low level. The difference compared with the factory settings is therefore substantial and after calibration the picture looks noticeably more natural. In HDR we can also make considerable improvements, particularly in terms of white balance and overall colour accuracy. The issue of managing brightness and colour saturation is somewhat different, though. At a certain point we run up against limitations inherent in the RGB backlight and local dimming. Individual zones must control both the brightness and the colour of the light simultaneously, so in more demanding scenes it is not always possible to achieve exactly the same saturation and brightness that the TV shows on simple test patterns. Calibration simply cannot completely overcome that. Despite this, after calibration the R95H delivers accurate image reproduction, and most of the errors we saw on the factory settings can be effectively eliminated.

Although the fluidity of tonal transitions in 4K HDR materials on The Frame Pro is not a problem at all, naturally, with a weaker signal - television, HD materials, or older Full HD films - imperfections may arise. Therefore, it is crucial how the television copes with these limitations thanks to its image processor. The noise reduction function works really effectively here. At the medium setting, it eliminates unwanted bands or artefacts, smoothing the image in a noticeable yet not excessive way. However, it's worth noting that Samsung tends to be aggressive in its approach - even at the lowest level of this function, it can "consume" film grain. So it's advisable to use it judiciously and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively enhance older materials to a native 4K resolution while maintaining good sharpness and readability. Films and series in lower quality simply look better here. However, it should be mentioned that there is a minor drawback - typical for many Samsung televisions. With very old sources of poor quality, you may notice clipping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's worth knowing that it might occur.

The Samsung R95H uses the new Micro RGB AI Processor, but in practice we didn't notice a big leap compared with the NQ4 AI Gen2 or Gen3 chips found in Samsung's other TVs. The upscaling itself still performs very well. The image is smoothed appropriately, yet retains plenty of sharpness and does not look overly soft. That's definitely one of Samsung's stronger points. It's a pity that with very low-resolution material you still can't completely disable overscan.

The processor also handles colour gradation well and can effectively smooth unwanted posterization. The noise reduction function is really effective, but you need to use it with care. At higher settings it can start to interfere quite heavily with the image and even remove natural film grain. For that reason it's best used only when the source material is actually heavily compressed.

The smoothness of motion in The Frame Pro is not only due to the matrix, which operates with a refresh rate of up to 144 Hz, but also the image processor and the smoothing system. It is thanks to this that we can adjust the way films or sports broadcasts are displayed to our own preferences. There are sliders for reducing blurring and reducing judder – the first function improves the sharpness of fast movements, while the second helps to soften the effect of a "jumping" image during camera pans. So, everyone can choose between a cinematic motion character and a smoother, more "television" style.

Samsung R95H has a 165 Hz panel, so its motion handling is really good. At 120 Hz, for example when gaming on a console or watching sport, motion blur is minimal, and when connected to a PC you can use the full 165 Hz and further improve motion clarity. However, bear in mind it is still a VA panel, so it does not respond as instantly as OLED. You may sometimes notice a faint trail behind a moving object, but from a normal viewing distance this is unlikely to be bothersome. For films and TV shows you can also use the adjustable motion smoothing. You can keep the more cinematic 24 fps look or gradually smooth the motion if you prefer a smoother picture. Samsung gives plenty of flexibility here, so you can easily choose a setting to suit your own preferences.

Samsung The Frame Pro does not pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full range of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there is the well-known Game Bar panel, which is a quick menu where key parameters can be checked on the fly—from refresh rates to enabled image processing modes. Are there any downsides? Indeed, The Frame Pro does not support Dolby Vision in game mode, but this is hard to consider a serious issue—most gamers use HDR10 anyway... which means HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the television independently interprets HDR tone mapping in games, and the user has no way to enable settings developed for consoles. This is a step backwards that may disappoint more knowledgeable gamers hoping for full compliance with HGiG guidelines. We can only hope that this issue will be resolved quickly.

An interesting feature of The Frame Pro is also the unusual arrangement of HDMI 2.1 ports. There are as many as five available—four are located in the One Connect box, and the fifth, in micro HDMI version, is directly on the television. This is quite an unusual solution, but rather practical. Samsung clearly suggests that this is the port to which you should connect your console or computer. Why? Because it minimises potential delays associated with communication through the wireless One Connect, and in the case of gaming, every millisecond matters. We have written separately about input lag, but it can already be revealed here that by connecting equipment directly to the television, we achieve the absolute maximum in response speed.

In terms of gaming the Samsung R95H is almost a complete TV. When you connect a PS5 or Xbox Series X you can use 4K at 120 Hz, VRR and ALLM, and the TV also works correctly with HGiG. The only larger omission is Dolby Vision Gaming, which Samsung simply does not support, as with its other televisions. There is also the Game Bar, already seen on other Samsung models, which lets you quickly check the frame rate, VRR status or HDR format and change the most important settings without leaving the game. You can also brighten darker parts of the picture or change the screen aspect ratio.

Samsung also offers Game Motion Plus, a motion-smoothing function developed specifically for games. It makes most sense in titles running at 30 fps, where it can noticeably improve smoothness and make camera movement feel much more pleasant. You should remember, though, that this comes at the cost of higher input lag (about 60 ms), so it is probably not the best choice for online or more fast-paced games. It's also worth mentioning the Gaming Hub, which lets you run some games directly from the cloud without connecting a console. In terms of gamer-focused features, it is therefore hard to find any major shortcomings in the R95H.