Samsung The Frame Pro vs Samsung QN80H

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a respectable result for a lifestyle model. In full-screen scenes, such as the board from the film The Meg or the initial sequence in Life of Pi, brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and convey their cinematic magic. However, the situation becomes complicated when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not manage these well. Sometimes, small elements are overly dimmed, which weakens the effect, or conversely – they are significantly brightened, but at the cost of losing the depth of black in that part of the image. This can be compared to light beams reminiscent of a laser beam spreading in dense fog – the effect is noticeable and bright, yet at the same time, it is quite unnatural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), colours are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. Generally, films or series watched in HDR on The Frame Pro showcase a rich colour palette, even if contrast and the functioning of the dimming algorithms can sometimes distract us.

The Samsung QN80H is undoubtedly a bright TV. In synthetic tests it exceeds the 1000-nit mark, which on paper promises a solid HDR effect. In practice the screen really shows its teeth, although it can't fully spread its wings (or its backlight, if you will 🤔) in every condition. Bright, wide scenes make the best impression. Well-lit outdoor shots and brightly lit scenes look really good on it. Brightness then stays around 700 nits, which provides a noticeable step up in quality compared with standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to dim these strongly, in order to protect black depth at all costs. On the one hand this gives better contrast, on the other... you lose dynamics and the brilliance of fine HDR detail. So the TV has considerable potential, but the dimming algorithm can be too restrictive.

Colour gamut coverage

When it comes to colours it's good as well. The QN80H uses quantum dot technology, and in our measurements it covered 93% of the DCI-P3 colour space and about 70% of BT.2020. Today those results aren't exactly jaw-dropping, but in real-world use they're more than sufficient to deliver a vivid, natural image for most films and TV series. Colours are suitably saturated, and after proper calibration they don't look artificial or overly aggressive.

We achieved the best results, of course, in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the type most commonly viewed – The Frame Pro performed really well. The white balance and gamma were almost perfectly matched, giving the image a natural and cohesive appearance. Admittedly, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed-up" character, but this didn’t significantly detract from the viewing experience in everyday use. For HDR content, the situation was similar regarding the white balance. This was at a good level; however, the biggest issue turned out to be brightness management. The EOTF curve was set in such a way that in many scenes, the image appeared blown out, with the brightest areas losing detail and turning into uniform patches of light. This severely undermined realism and caused the colours to appear overly sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their televisions, so we opted for calibration, and its results can be seen below.

The factory settings of the QN80H performed really well, especially compared with the majority of TVs we receive for testing. Of course, our measurements were taken in Filmmaker Mode, and that's the mode we recommend turning on immediately after the initial setup. For SDR material, our sample was set up surprisingly well. The white balance was very even, colours looked natural, and errors were so small they were hard to notice without measurement equipment. The only weaker point was the gamma. In the brighter parts of the image the TV brightened them a little too much, which at times made the picture lose some depth. Still, we'd like most TVs to look this good straight out of the box.

It fared a little worse in HDR. The white balance was still set correctly, so the problem was not with the colours but with the way the QN80H managed image brightness. This was immediately visible on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to clip. Interestingly, very small points were often dimmed too much at the same time. As a result, some fine details simply disappeared. So the factory Filmmaker mode in HDR is not bad, but it is definitely not as well calibrated as in SDR.

After calibration, the SDR mode looks absolutely perfect. We managed to eliminate the overly strong red saturation, which previously gave the image a somewhat excessively warm character. Colours have become more balanced, which resulted in a natural and pleasant reception of everyday content – from television to films and series from streaming or materials on YouTube. In HDR mode, the most work was required on the EOTF curve, which factory settings caused excessive brightening of the entire image. Calibration allowed us to largely "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limitations are set by the design of the television itself, as edge lighting reveals its constraints, and the smallest elements of light can still be overblown or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is significantly more enjoyable to watch, and it is certainly worth considering if you want to maximise the television's capabilities.

We saw the biggest difference after calibration in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we managed to get to grips with the way the QN80H handled brightness, as it had been over-brightening most scenes. After calibration the picture is calmer, more natural and much closer to how a faithful image should look.

Although the fluidity of tonal transitions in 4K HDR materials on The Frame Pro is not a problem at all, naturally, with a weaker signal - television, HD materials, or older Full HD films - imperfections may arise. Therefore, it is crucial how the television copes with these limitations thanks to its image processor. The noise reduction function works really effectively here. At the medium setting, it eliminates unwanted bands or artefacts, smoothing the image in a noticeable yet not excessive way. However, it's worth noting that Samsung tends to be aggressive in its approach - even at the lowest level of this function, it can "consume" film grain. So it's advisable to use it judiciously and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively enhance older materials to a native 4K resolution while maintaining good sharpness and readability. Films and series in lower quality simply look better here. However, it should be mentioned that there is a minor drawback - typical for many Samsung televisions. With very old sources of poor quality, you may notice clipping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's worth knowing that it might occur.

Digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we already know from the manufacturer's earlier models, and it still performs very well, especially with lower-resolution content. The image is effectively upscaled to 4K, but without excessive sharpening and without giving the impression the TV is aggressively trying to improve the source material.

The "Noise Reduction" function also proves useful. It can noticeably reduce posterisation and visible banding in lower-quality material, particularly in low-bitrate streaming. However, it's important to remember that it does not work without side effects. It can remove some film grain and slightly smooth the image. So with a high-quality source we'd leave this function switched off. If, however, someone is more bothered by banding and uneven tonal transitions than by the loss of some grain, "Noise Reduction" can be a really useful addition.

The smoothness of motion in The Frame Pro is not only due to the matrix, which operates with a refresh rate of up to 144 Hz, but also the image processor and the smoothing system. It is thanks to this that we can adjust the way films or sports broadcasts are displayed to our own preferences. There are sliders for reducing blurring and reducing judder – the first function improves the sharpness of fast movements, while the second helps to soften the effect of a "jumping" image during camera pans. So, everyone can choose between a cinematic motion character and a smoother, more "television" style.

Motion handling and motion clarity on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach as much as 240 Hz. That's new for Samsung TVs and a useful addition for people who want to use the TV for PC gaming as well. We were more interested, however, in how the QN80H performs at 120 Hz, because consoles use that refresh rate. Here it performs very well. The panel does not suffer greatly from the smearing typical of VA panels, and light trails behind moving objects are mainly visible on dark backgrounds. That said, it's nothing that would interfere with normal watching of sport or gaming. The TV also has a motion smoothing system that Samsung calls "Wyrazistością obrazu". You can adjust judder reduction and blur reduction separately, so it's easy to tailor its behaviour to films, sport or your own preferences.

Samsung The Frame Pro does not pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full range of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there is the well-known Game Bar panel, which is a quick menu where key parameters can be checked on the fly—from refresh rates to enabled image processing modes. Are there any downsides? Indeed, The Frame Pro does not support Dolby Vision in game mode, but this is hard to consider a serious issue—most gamers use HDR10 anyway... which means HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the television independently interprets HDR tone mapping in games, and the user has no way to enable settings developed for consoles. This is a step backwards that may disappoint more knowledgeable gamers hoping for full compliance with HGiG guidelines. We can only hope that this issue will be resolved quickly.

An interesting feature of The Frame Pro is also the unusual arrangement of HDMI 2.1 ports. There are as many as five available—four are located in the One Connect box, and the fifth, in micro HDMI version, is directly on the television. This is quite an unusual solution, but rather practical. Samsung clearly suggests that this is the port to which you should connect your console or computer. Why? Because it minimises potential delays associated with communication through the wireless One Connect, and in the case of gaming, every millisecond matters. We have written separately about input lag, but it can already be revealed here that by connecting equipment directly to the television, we achieve the absolute maximum in response speed.

The Samsung QN80H is a TV that stands out when it comes to gaming features. The biggest new addition for 2026 is DLG mode, which allows refresh rates of up to 240 Hz when the image is switched to Full HD. It's an option aimed mainly at PC users, but it also shows that Samsung is still heavily developing the gaming side of its TVs. However, the list of advantages doesn't end there. The QN80H has four full-fledged HDMI 2.1 ports, which is still not standard at this price point. So you can connect several consoles, a PC or a soundbar at the same time without having to wonder which port supports the full video capabilities. The TV also supports VRR, ALLM and HGiG, so it's hard to fault its basic feature set.

A downside is the lack of Dolby Vision, which may matter primarily to Xbox Series X owners. However, this is not a flaw that disqualifies the QN80H as a gaming TV. Samsung has a feature most manufacturers still lack: its proprietary motion smoothing, Game Motion Plus. It's a motion smoothing system that works in game mode too, allowing you to improve the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than the Dolby codec, especially in more demanding games that don't offer a 60 FPS mode. The image becomes noticeably smoother, while controls remain sufficiently responsive. So despite the lack of Dolby Vision, the QN80H remains one of the best-equipped gaming TVs in its class.