Samsung The Frame Pro vs Blaupunkt UGC5500S

Samsung The Frame Pro is one of the relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which is quite a respectable result for a lifestyle model. In full-screen scenes, such as the board from the film The Meg or the initial sequence in Life of Pi, brightness maintained a level of 700–800 nits. These values allow you to fully enjoy the HDR effects and convey their cinematic magic. However, the situation becomes complicated when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not manage these well. Sometimes, small elements are overly dimmed, which weakens the effect, or conversely – they are significantly brightened, but at the cost of losing the depth of black in that part of the image. This can be compared to light beams reminiscent of a laser beam spreading in dense fog – the effect is noticeable and bright, yet at the same time, it is quite unnatural and distracting. Fortunately, the colour aspect performs better. Thanks to the use of a quantum dot filter (QLED), colours are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. Generally, films or series watched in HDR on The Frame Pro showcase a rich colour palette, even if contrast and the functioning of the dimming algorithms can sometimes distract us.

Here, too, we will not mince words – if you are looking for a television strictly for cinematic experiences in HDR, you have come to the wrong place. The Blaupunkt UGC5500S is unfortunately not a machine designed for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on film scenes speaks for itself. It is simply too little to even talk about any real HDR effect. Quite frankly, everything displayed here in this format can be confidently regarded as a somewhat “enhanced” SDR mode. We expected this, as virtually every device in this price range falters in this area, but we feel obliged to warn you about it. Manufacturers love to boast about HDR compatibility with stickers on their boxes, but in reality, this format simply does not exist here – it lacks the “fuel” of brightness.

The situation is particularly difficult for Blaupunkt, as we are dealing with a panel that has a very basic coverage of the DCI-P3 colour palette, reaching only about 80%. You will not find any advanced coatings to extend these capabilities (such as quantum dots), which means that scenes that should ideally burst with richly saturated colours appear simply under-saturated on this screen. Therefore, we have a specific piece of advice for you: do not force the HDR mode on this model. If you have the option in the streaming app settings – simply turn it off. By sticking to the classic SDR mode, you can be sure that the television will not attempt to “enhance” something that it cannot handle hardware-wise.

We achieved the best results, of course, in Filmmaker mode, which immediately showed that Samsung had put effort into the factory settings. In SDR content – the type most commonly viewed – The Frame Pro performed really well. The white balance and gamma were almost perfectly matched, giving the image a natural and cohesive appearance. Admittedly, there were some noticeable errors, particularly in skin tones and reds, which could be overly saturated, giving everything a slightly "warmed-up" character, but this didn’t significantly detract from the viewing experience in everyday use. For HDR content, the situation was similar regarding the white balance. This was at a good level; however, the biggest issue turned out to be brightness management. The EOTF curve was set in such a way that in many scenes, the image appeared blown out, with the brightest areas losing detail and turning into uniform patches of light. This severely undermined realism and caused the colours to appear overly sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in their televisions, so we opted for calibration, and its results can be seen below.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, in short, twofold. Once again, we need to clearly separate what we see in standard SDR format from what happens when HDR is turned on, as these are two entirely different worlds. Let’s start with the better side of the coin. If you plan to watch classic television, YouTube, or older films on this television, you can count on really reasonably well-tuned colours. In our test unit, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being overly optimistic, we did notice some shortcomings. Looking at the gamma charts, we observed that the processor struggles with appropriately dimming the image in its brightest areas. Additionally, there is quite a strong, at times excessively aggressive red saturation, which resulted in visible errors in reproducing certain shades. Nevertheless, in general terms, the image in SDR is simply solid and can be watched without a grimace on one’s face. Unfortunately, the charm disappears the moment we again enter the HDR world. Here, Blaupunkt behaves as if we suddenly switched it to shop mode, and in its worst version. The excess blue in the white balance is so significant that it is almost blinding, ruining any realism of the scene. Moreover, the television interprets brightness very loosely, which, when analysing the EOTF curve, clearly showed that for most of the time, the colours appear simply washed out and lacking in depth. This is, by the way, perfectly visible through the colour errors that become evident in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which feels forced and lacking appropriate refinement.

After calibration, the SDR mode looks absolutely perfect. We managed to eliminate the overly strong red saturation, which previously gave the image a somewhat excessively warm character. Colours have become more balanced, which resulted in a natural and pleasant reception of everyday content – from television to films and series from streaming or materials on YouTube. In HDR mode, the most work was required on the EOTF curve, which factory settings caused excessive brightening of the entire image. Calibration allowed us to largely "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limitations are set by the design of the television itself, as edge lighting reveals its constraints, and the smallest elements of light can still be overblown or blend into the background. However, this is a matter of technology, not just calibration. After the correction, The Frame Pro is significantly more enjoyable to watch, and it is certainly worth considering if you want to maximise the television's capabilities.

It may sound like a joke – pulling out professional measuring equipment for a television costing around a thousand złotys / 250 dollars, but we wouldn’t be ourselves if we didn’t check it out. The question is: does such cheap equipment give us any room for manoeuvre when it comes to calibration? To your surprise, the answer is: yes, and very much so. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to really work on the picture. These are not just empty sliders; they are specific tools that we could utilise using our measuring sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial red saturation. We also fixed the issue of improper dimming in the brightest parts of the image. After calibration, the standard format image became significantly more balanced and simply correct. When it came to HDR, the situation was again more complicated. While we managed to 'tame' that aggressive blue tint in the white balance, it was clear that we were fighting somewhat in vain. Even after adjusting the settings, the television still tried to interfere with the image in its own way, as if the electronics knew better than us how the scene should look. Additionally, there is a hardware barrier that no slider can overcome – colours in HDR still remain under-saturated. This is simply due to the quality of the panel itself; it physically cannot produce the most vibrant colours. To sum up this topic: if any of you ask whether it is possible to calibrate a television for a 'thousand', we answer with full conviction: it is possible.

Although the fluidity of tonal transitions in 4K HDR materials on The Frame Pro is not a problem at all, naturally, with a weaker signal - television, HD materials, or older Full HD films - imperfections may arise. Therefore, it is crucial how the television copes with these limitations thanks to its image processor. The noise reduction function works really effectively here. At the medium setting, it eliminates unwanted bands or artefacts, smoothing the image in a noticeable yet not excessive way. However, it's worth noting that Samsung tends to be aggressive in its approach - even at the lowest level of this function, it can "consume" film grain. So it's advisable to use it judiciously and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively enhance older materials to a native 4K resolution while maintaining good sharpness and readability. Films and series in lower quality simply look better here. However, it should be mentioned that there is a minor drawback - typical for many Samsung televisions. With very old sources of poor quality, you may notice clipping of the image edges on the left side of the screen. It's not a problem that will ruin the viewing experience, but it's worth knowing that it might occur.

If you expect the processor in this model to magically "fix" the poor-quality signal from cable TV or old films from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this adequately in that the image is not blurry, but there's no mention of any intelligent sharpening or adding details here. Worse still, Blaupunkt is completely devoid of any features for reducing unwanted tonal transitions. If the material being watched has what is known as banding (that is, ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display it in all its glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly enlarges the frame, causing us to lose details at the very edges of the screen. In summary: in the category of digital "enhancing" of images, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

The smoothness of motion in The Frame Pro is not only due to the matrix, which operates with a refresh rate of up to 144 Hz, but also the image processor and the smoothing system. It is thanks to this that we can adjust the way films or sports broadcasts are displayed to our own preferences. There are sliders for reducing blurring and reducing judder – the first function improves the sharpness of fast movements, while the second helps to soften the effect of a "jumping" image during camera pans. So, everyone can choose between a cinematic motion character and a smoother, more "television" style.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us were expecting an impeccably sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won't find any digital motion smoothers in the menu. The manufacturer has not given us any room for manoeuvre – nothing can be smoothed out or adjusted to our personal preferences. The image is always "raw," and we receive it exactly as the source transmits it. For fans of cinematic "jumping" of the image, this might be good, but the rest of us simply have to get used to the lack of any motion enhancement.

Samsung The Frame Pro does not pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full range of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there is the well-known Game Bar panel, which is a quick menu where key parameters can be checked on the fly—from refresh rates to enabled image processing modes. Are there any downsides? Indeed, The Frame Pro does not support Dolby Vision in game mode, but this is hard to consider a serious issue—most gamers use HDR10 anyway... which means HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the television independently interprets HDR tone mapping in games, and the user has no way to enable settings developed for consoles. This is a step backwards that may disappoint more knowledgeable gamers hoping for full compliance with HGiG guidelines. We can only hope that this issue will be resolved quickly.

An interesting feature of The Frame Pro is also the unusual arrangement of HDMI 2.1 ports. There are as many as five available—four are located in the One Connect box, and the fifth, in micro HDMI version, is directly on the television. This is quite an unusual solution, but rather practical. Samsung clearly suggests that this is the port to which you should connect your console or computer. Why? Because it minimises potential delays associated with communication through the wireless One Connect, and in the case of gaming, every millisecond matters. We have written separately about input lag, but it can already be revealed here that by connecting equipment directly to the television, we achieve the absolute maximum in response speed.

When it comes to gaming on the Blaupunkt, we weren't expecting miracles, and indeed – the list of features is not very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first plus is that the TV quickly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low-latency mode. This is convenient because you don't have to fiddle with settings each time to prevent input lag from ruining the fun. The second point is a genuine surprise that caught us off guard. Although it has a 60 Hz panel, the Blaupunkt can display images at 120 Hz at Full HD resolution. Sure, you lose the details of 4K, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an inexpensive device. Besides these two points, you won't find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. This is a simple screen for occasional gaming.