Samsung The Frame LS03D vs Samsung S85H

Samsung The Frame LS03D performs really well with brightness. Results of 700 nits make bright elements on the screen look striking and detailed, whether they illuminate the entire screen or appear as small points of light against a dark background. In more demanding scenes, like the fourth sequence from the film Sicario 2, the black levels are average, but we have already discussed this in the section on contrast. As for brightness – the television definitely excels here. An additional advantage is the quantum dot coating, which is QLED technology. Thanks to this, the colour palette coverage has been improved, although The Frame does not stand out in this regard compared to the competition.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 series. In the same movie scenes last year's model stayed closer to around 700 nits, while the S85H can reach roughly 800 nits. This isn't a change that completely transforms HDR perception, but that extra brightness is noticeable, especially with pinpoint highlights, specular reflections and stronger special effects. Around 800 nits is already a very good result for an entry-level OLED and in most films it's enough for HDR to have the proper impact. Bright elements can stand out clearly against perfect black, and it's still that contrast that does most of the work. You do need to bear in mind a typical limitation of organic panel technology. When a very bright scene covers a large part of the screen, brightness can drop by almost half. That's the effect of the panel's protection mechanisms, which limit its power with large bright areas.

Colours

The S85H can deliver very pleasing, saturated colours and in most HDR films it looks really good in that respect. We measured around 95% DCI-P3 coverage, so the palette most commonly used in movies is reproduced to a very high degree. Skin tones, greens and stronger reds still have the right intensity, and in normal viewing it's hard to fault them. Only when you look wider at BT.2020 do the limitations of the new OLED SE panel become apparent. Coverage was about 70%, a little less than previous-generation WOLEDs and noticeably less than QD-OLED panels. In films this is not a big loss, because most productions rarely use such highly saturated colours. You're more likely to notice it in games, where creators often opt for more intense colours.

Samsung offers several picture modes on its televisions, but undoubtedly the Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as is often the case with mass production, the differences between units can be considerable, and our tested model was not free from a few issues.

In the case of SDR content, the white balance leaned heavily towards red, with a slight boost in blue. This effect was particularly noticeable in comparison images – for example, in a photograph of a boy whose face was unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which detracted from its depth.

In 4K HDR content, the white balance was again dominated by red, this time in combination with green. Meanwhile, blue clearly lost intensity, which was easy to notice on the Color Checker palette, where colours began to "drift" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the television has a tendency to excessively brighten the image, especially in the darkest elements of scenes.

Overall, while it did not look terrible, it definitely required adjustment. Fortunately, Samsung offers extensive calibration options, which provides the chance for a significant improvement in image quality. Therefore, we proceeded with professional calibration to extract the full potential from this television.

For colour evaluation we naturally chose Filmmaker mode, and in SDR our S85H sample was very well set up from the factory. The largest deviation is in the white balance, where, as brightness rises, there is a slight lack of blue. In practice this means whites and greys have a subtly warmer tint than they should. However, this is not a major fault and during normal viewing it is unlikely to be very noticeable. Gamma also stays close to the reference value, so the image is neither overly bright nor unnecessarily dim. The S85H’s SDR picture quality is therefore very good straight out of the box. A few more imperfections appear in HDR. Here the white balance drifts more with increasing brightness, blue starts to dominate and the red component is clearly lacking. This also translates into larger errors for some colours. They do not yet amount to shifts that completely change the character of the image, but in direct comparison with a reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

After professional calibration, the Filmmaker Mode shows its full potential. The white balance in HD content is exemplary – errors at the level of 0.5 indicate almost perfect colour reproduction accuracy. The image now looks natural, and the colours are precisely as they should be. In 4K HDR content, the effect is not quite as perfect, but it still maintains a really high level. The colours are vibrant, well-saturated, and the overall picture quality can be impressive.

So where does the problem arise, given our praise for colour reproduction? Unfortunately, the entire experience is marred by brightness characteristics. The gamma in HD content looks decent, but in 4K HDR it's not as good. The EOTF curve shows that the television excessively brightens certain parts of the image, which is a result of construction limitations. The lack of local dimming means that the television cannot accurately control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nonetheless, after calibration, Samsung The Frame LS03D offers excellent colour reproduction, particularly in HD content, and the overall appearance is considerably better than before the settings were corrected.

Calibration yields very good results on the S85H. First and foremost, it was possible to set the white balance almost perfectly, which removes the slightly too warm character of the image that was previously visible in SDR. Colour reproduction itself also improves markedly, with most errors falling to a very low level and in everyday viewing it is hard to speak of any noticeable inaccuracies. You can also make significant improvements in HDR, although some issues remain due to the TV's inherent characteristics. The S85H does not always hold the brightness curve perfectly; the darkest parts are slightly lifted, and as you approach the panel's limits small deviations are visible in the brightest areas. Added to this is the limited coverage of the wider BT.2020 gamut, which of course cannot be overcome by any calibration. Despite this, the end result is very good and, after calibration, the S85H can produce a really well-tuned, natural image.

It’s time to check how Samsung The Frame LS03D performs with older, lower-quality materials. We already know that the fluidity of tonal transitions is at a very high level here, so we were curious to see how the television would handle smoothing them out.

The noise reduction feature in the "Standard" setting does its job well – tonal transitions are noticeably smoothed out, and at the same time, the image does not lose too much detail. However, it is worth noting that this effect also smooths out film grain, so its use will be a matter of individual preference.

When it comes to image scaling, the television also performed really well. The test chart turned out solid – the model was reproduced correctly, with clear details. The branches in the background, though slightly frayed in places, generally appear natural and do not stand out as imperfections.

Samsung has fitted the S85H with the same proprietary AI NQ4 Gen2 processor used in last year’s S85F and, in terms of digital image processing, it performs quite well. Upscaling is one of the model’s stronger points. Lower-resolution material is well sharpened, edges look natural, and the picture does not feel overly artificial. One caveat is a typical Samsung trait: at very low resolutions you cannot completely disable overscan, so the TV may slightly crop the left edge of the image. The "noise reduction" function also works very well, smoothing weaker tonal transitions. The processor can effectively remove posterisation and other imperfections visible in lower-quality material. However, you need to be careful with the strength of this function, because Samsung can be quite aggressive here. When it is activated, small image details, such as the texture of skin or clothing, can start to disappear along with the unwanted artefacts.

Firstly, it is worth noting that the model we tested in the size of 55 inches, like the 65, 75 and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series only offer 60 Hz panels, which is worth keeping in mind when making a purchase. As for improving motion fluidity, the television offers a feature called “Picture Clarity”. This is a classic motion smoother that gives users the ability to adjust it using two sliders:

Motion blur reduction – this controls the sharpening of the image in dynamic scenes. The higher the value, the less blur during quick camera movements or moving objects. However, overly aggressive settings may cause the image to become unnatural, appearing like a “soap opera”.

Judder reduction – this slider influences the smoothness of frame playback, particularly in materials with a lower frame rate, such as films (24 fps). Higher settings can smooth motion but may also lead to excessive “plasticity” of the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to one’s own preferences. It is worth experimenting with the settings to find the perfect balance between fluidity and a natural appearance of the image. We recommend setting them as shown in the picture.

The S85H uses an OLED panel, so it performs excellently for motion blur. Pixels respond virtually instantly, so moving objects do not leave the characteristic trailing seen on some LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during rapid motion. The panel itself runs at 120 Hz. That is more than sufficient for films, TV series, sport and console gaming. It is a pity Samsung did not include a higher refresh rate aimed at PC gamers, as more and more TVs now offer 144 or even 165 Hz at 4K. However, that does not affect motion handling in films or sport.

You also have a classic motion-smoothing feature with two settings, blur reduction and judder reduction. So you can decide whether films should retain their cinematic 24 frames per second or whether you prefer to smooth them a little. The S85H gives plenty of freedom here, and the interpolation works well and, with sensible settings, does not generate too many artefacts.

The Frame LS03D in the 2024 version has been equipped with four HDMI ports, but only one of them supports the 2.1 standard with a bandwidth of 40 Gb/s. This is important information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC.

In terms of features for gamers, The Frame truly has a lot to boast about. Here we find ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and HGiG. It is worth highlighting that HGiG has been very well implemented here, which is particularly important as the television does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG turns out to be a better standard for gaming.

Samsung has also not forgotten about features that enhance gaming comfort. Game Bar is an advanced panel for gamers that allows for quick adjustment of screen settings without the need to dig through the television's menu. We can even change the aspect ratio from 16:9 to a panoramic 21:9, which may be a significant advantage for some gamers.

However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoothness enhancer dedicated to games that adds additional frames of animation without significantly affecting input lag. The effect is truly noticeable – the image appears much smoother, which fans of dynamic titles will particularly appreciate.

In summary – Samsung The Frame LS03D is a television that offers a solid set of features for gamers. While the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions makes gaming on this television a truly enjoyable experience.

The Samsung S85H is very well prepared for gaming, essentially regardless of whether you connect a console or a PC. The manufacturer hasn't skimped on ports and all four HDMI ports support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR and ALLM without worrying which input your console is plugged into. With multiple devices that matters a lot, because you don't have to choose between a console, a PC or a soundbar connected via eARC. The feature set itself is very comprehensive. The S85H supports VRR, FreeSync and automatic game mode switching, and Samsung also offers its extensive Game Bar where you can quickly check key signal parameters and change settings without leaving the game. The only notable omission is Dolby Vision, which will matter mainly to Xbox owners. This, incidentally, is typical of Samsung TVs. Game Motion Plus performs very well, and it's one of the features that have set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as much increase in input lag as a conventional motion interpolator. In practice, with slower-paced games, racing titles or action games this can really improve the perceived motion, especially if you're sensitive to low frame rates.