Samsung The Frame LS03D vs Hisense UR8S

Samsung The Frame LS03D performs really well with brightness. Results of 700 nits make bright elements on the screen look striking and detailed, whether they illuminate the entire screen or appear as small points of light against a dark background. In more demanding scenes, like the fourth sequence from the film Sicario 2, the black levels are average, but we have already discussed this in the section on contrast. As for brightness – the television definitely excels here. An additional advantage is the quantum dot coating, which is QLED technology. Thanks to this, the colour palette coverage has been improved, although The Frame does not stand out in this regard compared to the competition.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern peak brightness reached around 2200 nits. That’s a very good result, but as always what’s much more important is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes, where there’s a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has plenty of punch. It’s worse with small bright elements on a dark background. The TV clearly dims them to keep good blacks and to prevent excessive bloom. As a result things like single stars or tiny reflections can be only around 200 nits. And here HDR is no longer as impressive. So you can see that the local dimming algorithm works effectively, but it also has its cost: sometimes it simply sacrifices the brightness of small details in favour of contrast.

Colours

With RGB Mini-LED TVs colours should be judged a little differently than usual. If we look solely at the panel’s native capabilities, the UR8S performs excellently. We measured around 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs and this is where the potential of the RGB backlight is most obvious. The problem is that this potential is not always realised in real scenes. When we ran the same measurements on test patterns with a film background applied, saturation of some colours began to fall noticeably. Individual zones are not always able to control the three RGB components so precisely when the scene becomes more complex. This is most visible with blue and magenta. On simple test patterns they can look very strong, but in more demanding scenes samples of those colours visibly shrink. So the UR8S’s capabilities are enormous, it’s just that the TV cannot fully make use of them in every scene.

Samsung offers several picture modes on its televisions, but undoubtedly the Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as is often the case with mass production, the differences between units can be considerable, and our tested model was not free from a few issues.

In the case of SDR content, the white balance leaned heavily towards red, with a slight boost in blue. This effect was particularly noticeable in comparison images – for example, in a photograph of a boy whose face was unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which detracted from its depth.

In 4K HDR content, the white balance was again dominated by red, this time in combination with green. Meanwhile, blue clearly lost intensity, which was easy to notice on the Color Checker palette, where colours began to "drift" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the television has a tendency to excessively brighten the image, especially in the darkest elements of scenes.

Overall, while it did not look terrible, it definitely required adjustment. Fortunately, Samsung offers extensive calibration options, which provides the chance for a significant improvement in image quality. Therefore, we proceeded with professional calibration to extract the full potential from this television.

For assessing the out-of-the-box colours we used Filmmaker mode, which is intended to show an image that is as close as possible to how the material was prepared. Looking at the white balance alone, the UR8S performs quite well. There is no strong tint that immediately jumps out, although as brightness increases a little too much blue and red start to appear, with a simultaneous shortfall of green. Colour errors therefore show up in measurements, but the image itself does not look bad. We have far greater reservations about how the UR8S manages picture brightness. In SDR the gamma sits around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the picture is too bright, especially in the midtones. Shadows are lifted too much, causing the image to lose some depth. A similar tendency is visible in HDR. The EOTF curve is above the reference value for a large part of its range, so the UR8S again brightens the image more than it should. This is not due to a lack of brightness — the TV has plenty — but to the way it manages that brightness. As a result, HDR content can look very striking, but not always precisely as it should.

After professional calibration, the Filmmaker Mode shows its full potential. The white balance in HD content is exemplary – errors at the level of 0.5 indicate almost perfect colour reproduction accuracy. The image now looks natural, and the colours are precisely as they should be. In 4K HDR content, the effect is not quite as perfect, but it still maintains a really high level. The colours are vibrant, well-saturated, and the overall picture quality can be impressive.

So where does the problem arise, given our praise for colour reproduction? Unfortunately, the entire experience is marred by brightness characteristics. The gamma in HD content looks decent, but in 4K HDR it's not as good. The EOTF curve shows that the television excessively brightens certain parts of the image, which is a result of construction limitations. The lack of local dimming means that the television cannot accurately control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nonetheless, after calibration, Samsung The Frame LS03D offers excellent colour reproduction, particularly in HD content, and the overall appearance is considerably better than before the settings were corrected.

Hisense provides plenty of calibration options and, in SDR, these can yield a very good result. After calibration, the white balance is practically even across the entire range, and colour errors fall to very low values. The UR8S can be adjusted very precisely here. HDR is somewhat different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations begin to appear. The most interesting aspect, however, is the behaviour of the EOTF curve. Even after it has been correctly set on test patterns, the UR8S still tends to interpret brightness in its own way when watching films. Depending on the scene, parts of the image are slightly brightened while others are dimmed relative to how they should appear. This shows that the algorithms controlling the local dimming have a significant influence on the final image. Calibration therefore allows colours to be improved very effectively, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

It’s time to check how Samsung The Frame LS03D performs with older, lower-quality materials. We already know that the fluidity of tonal transitions is at a very high level here, so we were curious to see how the television would handle smoothing them out.

The noise reduction feature in the "Standard" setting does its job well – tonal transitions are noticeably smoothed out, and at the same time, the image does not lose too much detail. However, it is worth noting that this effect also smooths out film grain, so its use will be a matter of individual preference.

When it comes to image scaling, the television also performed really well. The test chart turned out solid – the model was reproduced correctly, with clear details. The branches in the background, though slightly frayed in places, generally appear natural and do not stand out as imperfections.

A big plus of the UR8S is the use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model's stronger points. The TV handles smoothing tonal transitions very well, especially with lower-quality content. The feature responsible for this effect works effectively without overprocessing the picture. Even on the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image is not overly sharpened. The UR8S simply copes very well with a weaker signal, and in this respect it is one of its most notable strengths.

Firstly, it is worth noting that the model we tested in the size of 55 inches, like the 65, 75 and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series only offer 60 Hz panels, which is worth keeping in mind when making a purchase. As for improving motion fluidity, the television offers a feature called “Picture Clarity”. This is a classic motion smoother that gives users the ability to adjust it using two sliders:

Motion blur reduction – this controls the sharpening of the image in dynamic scenes. The higher the value, the less blur during quick camera movements or moving objects. However, overly aggressive settings may cause the image to become unnatural, appearing like a “soap opera”.

Judder reduction – this slider influences the smoothness of frame playback, particularly in materials with a lower frame rate, such as films (24 fps). Higher settings can smooth motion but may also lead to excessive “plasticity” of the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to one’s own preferences. It is worth experimenting with the settings to find the perfect balance between fluidity and a natural appearance of the image. We recommend setting them as shown in the picture.

The UR8S is equipped with a panel with a native 180 Hz refresh rate, so right from the start it offers excellent motion handling. The panel itself performs really well here, although some limitations typical of VA panels are still visible. Motion blur is relatively minor for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

The Frame LS03D in the 2024 version has been equipped with four HDMI ports, but only one of them supports the 2.1 standard with a bandwidth of 40 Gb/s. This is important information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC.

In terms of features for gamers, The Frame truly has a lot to boast about. Here we find ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and HGiG. It is worth highlighting that HGiG has been very well implemented here, which is particularly important as the television does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG turns out to be a better standard for gaming.

Samsung has also not forgotten about features that enhance gaming comfort. Game Bar is an advanced panel for gamers that allows for quick adjustment of screen settings without the need to dig through the television's menu. We can even change the aspect ratio from 16:9 to a panoramic 21:9, which may be a significant advantage for some gamers.

However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoothness enhancer dedicated to games that adds additional frames of animation without significantly affecting input lag. The effect is truly noticeable – the image appears much smoother, which fans of dynamic titles will particularly appreciate.

In summary – Samsung The Frame LS03D is a television that offers a solid set of features for gamers. While the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions makes gaming on this television a truly enjoyable experience.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you can expect from a modern console or PC display. It offers ALLM, VRR and 4K at 120 Hz. There is also Dolby Vision in Game Mode, so when using, for example, the Xbox Series X you do not have to give up that HDR format. PC gamers get even more options. The panel can run at 4K at 180 Hz, and dropping to Full HD can raise the refresh rate to as much as 330 Hz. There is also a Game Bar that lets you quickly check key information and change gaming-related settings. The only clear omission is a correct implementation of HGiG. With it enabled the TV still alters HDR brightness mapping, so we do not get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.