Samsung The Frame LS03D vs Haier M90E

Samsung The Frame LS03D performs really well with brightness. Results of 700 nits make bright elements on the screen look striking and detailed, whether they illuminate the entire screen or appear as small points of light against a dark background. In more demanding scenes, like the fourth sequence from the film Sicario 2, the black levels are average, but we have already discussed this in the section on contrast. As for brightness – the television definitely excels here. An additional advantage is the quantum dot coating, which is QLED technology. Thanks to this, the colour palette coverage has been improved, although The Frame does not stand out in this regard compared to the competition.

Haier M90E is a television that does not lack brightness. In most film scenes, the peak luminance exceeds 1000 nits, which gives the image a distinct 'kick' and high dynamics. It performs really well in typical bright HDR materials. However, one must take into account the aforementioned dimming algorithm. In scenes that are not uniformly bathed in light – for example, when displaying single stars on a black sky – the high brightness highlights imperfections in zone control. Instead of a precise point of light, we often see a pronounced halo effect around bright objects. Despite these shortcomings, the overall image presentation can be pleasing, largely due to the colour reproduction. The manufacturer used a phosphor PFS coating, which allows for a wide coverage of the colour palette. In our measurements, the coverage of the DCI-P3 space reached a solid 95%.

Samsung offers several picture modes on its televisions, but undoubtedly the Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as is often the case with mass production, the differences between units can be considerable, and our tested model was not free from a few issues.

In the case of SDR content, the white balance leaned heavily towards red, with a slight boost in blue. This effect was particularly noticeable in comparison images – for example, in a photograph of a boy whose face was unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which detracted from its depth.

In 4K HDR content, the white balance was again dominated by red, this time in combination with green. Meanwhile, blue clearly lost intensity, which was easy to notice on the Color Checker palette, where colours began to "drift" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the television has a tendency to excessively brighten the image, especially in the darkest elements of scenes.

Overall, while it did not look terrible, it definitely required adjustment. Fortunately, Samsung offers extensive calibration options, which provides the chance for a significant improvement in image quality. Therefore, we proceeded with professional calibration to extract the full potential from this television.

For the measurements, we selected the Film mode, which is supposed to offer an image closest to the creators' intentions. Unfortunately, in the case of the M90E, its characteristics – apart from the reduced brightness – differ little from the Dynamic mode. Both in SDR and HDR materials, the image is distinctly tinged with a cool blue hue. The white balance is heavily skewed towards blue, which resembles typical, aggressive 'store' settings. This results in an unnatural representation of skin tones and makes the image fatiguing to the eyes over extended viewing periods. The management of brightness also negatively impacts colour fidelity. The television struggles to maintain proper levels – small details are often too dim, while larger, bright areas of the image suffer from clipping. These deviations in the brightness curve, combined with the cool white balance, lead to very significant colour reproduction errors (DeltaE) in the factory settings.

After professional calibration, the Filmmaker Mode shows its full potential. The white balance in HD content is exemplary – errors at the level of 0.5 indicate almost perfect colour reproduction accuracy. The image now looks natural, and the colours are precisely as they should be. In 4K HDR content, the effect is not quite as perfect, but it still maintains a really high level. The colours are vibrant, well-saturated, and the overall picture quality can be impressive.

So where does the problem arise, given our praise for colour reproduction? Unfortunately, the entire experience is marred by brightness characteristics. The gamma in HD content looks decent, but in 4K HDR it's not as good. The EOTF curve shows that the television excessively brightens certain parts of the image, which is a result of construction limitations. The lack of local dimming means that the television cannot accurately control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nonetheless, after calibration, Samsung The Frame LS03D offers excellent colour reproduction, particularly in HD content, and the overall appearance is considerably better than before the settings were corrected.

Haier M90E clearly benefits from professional calibration, particularly with SDR content. The television's menu offers a sufficient number of tools to effectively correct factory errors. We managed to 'tame' the white balance and eliminate the dominant blue tint. We also corrected, though to a lesser extent, the brightness curve (gamma), which allowed us to recover some detail in the shadows that were too heavily dimmed out of the box. The final effect in SDR is a picture that is significantly more natural and pleasant to watch. In HDR mode, the success is only partial. Although we were able to improve the white balance here as well, colour reproduction errors (Color Checker) remained at a high level. Analysis of the EOTF curve (responsible for brightness in HDR) indicates the cause of the problem: the television imposes its own interpretation of the signal and does not provide tools for modifying this curve. The source of the high errors is not the calibration itself, but the specific characteristics of the device – aggressive and imprecise zone dimming interferes with measurements and is 'firmly' embedded in the characteristics of this model.

It’s time to check how Samsung The Frame LS03D performs with older, lower-quality materials. We already know that the fluidity of tonal transitions is at a very high level here, so we were curious to see how the television would handle smoothing them out.

The noise reduction feature in the "Standard" setting does its job well – tonal transitions are noticeably smoothed out, and at the same time, the image does not lose too much detail. However, it is worth noting that this effect also smooths out film grain, so its use will be a matter of individual preference.

When it comes to image scaling, the television also performed really well. The test chart turned out solid – the model was reproduced correctly, with clear details. The branches in the background, though slightly frayed in places, generally appear natural and do not stand out as imperfections.

The evaluation of the image processor must be divided into two separate aspects, as the Haier M90E behaves inconsistently here. The first issue is the upscaling itself, that is, scaling lower resolution content to 4K. In this task, the television performs quite decently. The algorithms effectively enhance detail, resulting in a relatively sharp, clear, and legible final image. In this regard, it is hard to have major objections to the device.

The situation is completely different with materials that have a high degree of compression, as encountered in older recordings or on platforms like YouTube with lower bitrate. Here, the processor "struggles" with smoothing tonal transitions and masking imperfections in the source. The television fails to hide compression blocks, resulting in a very harsh, "digital" character of the image. The lack of effective artifact reduction can severely discourage viewing lower quality content on this screen.

Firstly, it is worth noting that the model we tested in the size of 55 inches, like the 65, 75 and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series only offer 60 Hz panels, which is worth keeping in mind when making a purchase. As for improving motion fluidity, the television offers a feature called “Picture Clarity”. This is a classic motion smoother that gives users the ability to adjust it using two sliders:

Motion blur reduction – this controls the sharpening of the image in dynamic scenes. The higher the value, the less blur during quick camera movements or moving objects. However, overly aggressive settings may cause the image to become unnatural, appearing like a “soap opera”.

Judder reduction – this slider influences the smoothness of frame playback, particularly in materials with a lower frame rate, such as films (24 fps). Higher settings can smooth motion but may also lead to excessive “plasticity” of the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to one’s own preferences. It is worth experimenting with the settings to find the perfect balance between fluidity and a natural appearance of the image. We recommend setting them as shown in the picture.

The Haier M90E is equipped with a simple yet functional motion smoothing system (MEMC). In the settings menu, the user will find a three-level adjustment scale: low, medium, and high. This allows for the adjustment of the degree of intervention in the image to one’s own preferences – from gentle smoothing of 24p films to maximum fluidity (the soap opera effect). The system operates stably and fulfills its purpose in typical applications.

The Frame LS03D in the 2024 version has been equipped with four HDMI ports, but only one of them supports the 2.1 standard with a bandwidth of 40 Gb/s. This is important information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC.

In terms of features for gamers, The Frame truly has a lot to boast about. Here we find ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and HGiG. It is worth highlighting that HGiG has been very well implemented here, which is particularly important as the television does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG turns out to be a better standard for gaming.

Samsung has also not forgotten about features that enhance gaming comfort. Game Bar is an advanced panel for gamers that allows for quick adjustment of screen settings without the need to dig through the television's menu. We can even change the aspect ratio from 16:9 to a panoramic 21:9, which may be a significant advantage for some gamers.

However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoothness enhancer dedicated to games that adds additional frames of animation without significantly affecting input lag. The effect is truly noticeable – the image appears much smoother, which fans of dynamic titles will particularly appreciate.

In summary – Samsung The Frame LS03D is a television that offers a solid set of features for gamers. While the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions makes gaming on this television a truly enjoyable experience.

From a hardware perspective, the Haier M90E is a solid proposition. The television is equipped with two full-bandwidth HDMI 2.1 ports, which supports key technologies: VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). It is also worth noting the proper implementation of the Dolby Vision mode for gaming, which maintains a relatively low input lag. Problems arise with the software configuration. The biggest drawback is the forced, continuous dynamic tone mapping by the television’s processor. This prevents correct HDR calibration from the console using system test patterns (HGiG) – the television ignores source settings and processes the image on its own terms. We also noted shortcomings in the interface: the M90E does not have a typical "Game Bar" (overlay with parameters), which is standard among competitors. Collaboration with Xbox consoles proved problematic with unusual parameters – the device struggles to correctly display a resolution of 1440p at a refresh rate of 120 Hz. Despite the aforementioned software shortcomings, the Haier M90E remains a very appealing screen for gamers. The overall reception is saved by the solid hardware base. The native refresh rate of 144 Hz and the presence of full-fledged HDMI 2.1 ports are advantages that are crucial for everyday use. If we are looking for a television that ensures high fluidity and supports 4K signal, this model will fulfil its task.