Samsung QN90F / QN92F vs Dreame S100

The Samsung QN90F can truly shine with brightness. In our measurements, it achieved over 2200 nits, which directly translates to the viewing experience. In practice, this means that when a film features a very bright scene – for example, a sunrise in The Meg – the screen looks as if it is actually lit by natural light. This is not just a number from a chart, but a real sense of image intensity! However, the television may not always deliver this full power. With smaller details like reflections or lamps, brightness drops to 500–700 nits. This is a deliberate decision by the algorithms – it allows for better control of the contrast between large and small elements, preventing the image from losing balance. Importantly, this is still a huge improvement compared to last year's QN90D, where similar details were often almost invisible, shining at just 200 nits. Here, the HDR effect is much more consistent and credible. The only downside is the colours. The DCI-P3 coverage has stalled at 91%, which in this price bracket can be considered a rather average result.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

The colour reproduction of the QN90F was tested in Filmmaker mode and, as is often the case with Samsung televisions, this mode proves to be the best starting point straight out of the box. However, this does not mean that the image is free from flaws. The white balance in both SDR and HDR content was surprisingly good – the colours did not drift in any direction and even in its factory settings, it looked solid. A problem arose with the gamma curves and EOTF, which dictate how the television manages brightness. Here, the QN90F significantly brightened the entire image, causing blacks and colours to lose their intensity, and the overall effect resembled that of an applied milky filter. Fortunately, Samsung, unlike many competitors in the miniLED world, provides the user with plenty of tools to control the settings that we do not find with other manufacturers, such as Chinese producers. Therefore, we decided to see if we could squeeze the full potential out of the QN90F because we know that such a high-end series is capable of much more.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

After our adjustment of the settings, the QN90F displayed what it is truly capable of – and it must be admitted that this is one of the best images we have seen on a miniLED screen this year. As we mentioned earlier, the white balance was not a major issue even in its factory state, but only after gamma calibration did it manage to get close to reference values. The same is true for HDR content, where the EOTF curve post-adjustment presents mature and cohesive results. Indeed, in some films, it is noticeable that the smallest elements of the image are slightly brightened, and with a limited number of dimming zones, there is still a risk of halo effect. However, it should be remembered that such phenomena are characteristic of all miniLED televisions, and it is difficult to expect miracles even from the QN90F. The most important thing is that after calibration, the television delivers an image that, in terms of representing the director's vision, confidently competes with many OLED screens available on the market.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

QN90F handles upscaling very well. Materials in lower resolutions, even SD, are enhanced to a clear and sharp image, in which a lot of detail in the background can be seen. This is a significant advantage, as the television makes older content or everyday television look considerably better than on most budget screens. However, the issue of overscan remains, which is the trimming of the screen edges, and this cannot be turned off in Samsung TVs. This can cause some subtitles on the screen to disappear or Auntie's face from the wedding on the VHS tape to be slightly cut off. 😉

Digital image processing also works well. In the menu, we find a function called "noise reduction," which can smooth tonal transitions and improve the reception of lower quality materials, e.g. from YouTube. At the medium setting, the effect is most beneficial – it does not heavily interfere with details, while eliminating the problem of "stepping" in colours. However, it is worth remembering that the function can be quite aggressive and removes natural grain from older films, so it is best to use it in moderation.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

The QN90F is equipped with a panel that has a maximum refresh rate of 165 Hz, and although this advantage will primarily be appreciated by PC gamers, it is still worth highlighting. In films or sports broadcasts, we are limited to the classic 120 Hz, but this is not a cause for concern. In practice, the additional motion smoother is of greater importance here. With the "Motion Clarity" setting, we can adjust the picture to our own preferences. The blur reduction option is responsible for fluidity and ghosting in sports. Meanwhile, the "judder reduction" function improves motion smoothness in productions shot at 24 frames, such as films and series. If we set it high, the film appears smoother and more fluid than it was actually shot. Lower values, on the other hand, preserve its cinematic "rawness" with a visible film frame.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

QN90F has almost everything to be the perfect television for gamers. There’s no need to remind anyone of features like four HDMI ports, VRR, ALLM, or refresh rates reaching even 165 Hz. The Game Motion Plus mode deserves great praise, as it is a unique motion smoother for games. Thanks to this, it adds a few “artificial” frames and makes the image generated from the console look smoother than it should. This is a very unique solution in the world of televisions – rival systems usually do not offer this – and that is why Samsung has had a strong selling point among gamers for years, even despite the lack of support for the still niche Dolby Vision in games.

[UPDATE] We have updated our tests of Samsung televisions from the 2025 lineup due to the release of software version 1131, which restored the crucial feature for gamers, HGiG.

So why do we say "almost" the perfect screen? Unfortunately, like in recent Samsung models, we noticed an issue with the lack of the HGiG feature. This solution allows the television to leave the control of tone mapping up to the console, so that games look exactly as intended by the creators. What's worse, this feature was previously present and disappeared after software updates. Instead of minor improvements, we got a step back. It’s a shame, because without this absence, the QN90F could truly be the ideal choice for gamers in the miniLED category.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.