Samsung QN80F vs LG OLED B6

QN80F is quite a bright screen – in synthetic tests, it achieved nearly 1000 nits, which allows for justified expectations regarding HDR content. And indeed, in many scenes, the television can truly shine. Sequences with a lot of light – like shots from the film Life of Pi or wide, bright surfaces in The Meg – look impressive. Brightness remains around 700 nits, which provides a solid effect, sufficient to feel the true "HDR magic." Unfortunately, not every scene looks that good. In materials with small, bright details on a dark background, such as in Sicario 2, the television has issues – it can significantly dim certain elements, sometimes to the point where they disappear from the image. This is the result of a limited number of dimming zones, which forces the device to make compromises: either maintain inky blacks or sacrifice some detail. QN80F usually chooses the former. As a consolation, there is quite decent coverage of a wide colour gamut – DCI-P3 at 93%. This is not the highest score on the market, but it is more than adequate for most content on streaming platforms.

The LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year’s B5. That’s down to the new, budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR look fuller in many scenes than on last year’s lower‑end OLEDs. That does not mean the B6 has no limitations. In very bright shots, when a large part of the screen is strongly lit, brightness can fall below 400 nits. This behaviour is typical for OLED TVs, especially in this segment, and that’s where you see the biggest difference compared with more expensive models. Even so, we judge the B6’s results as genuinely solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that films truly feel like a step up from ordinary SDR. Colour gamut Using the OLED SE panel has had a slight impact on wide colour gamut coverage. Compared with last year’s model the results have fallen by a few percentage points. It covers roughly 96% of DCI‑P3 and about 71% of BT.2020. That doesn’t mean the colours on the LG B6 are weak. In most films and series they look lively, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD‑OLED panels. This stems from the WOLED panel structure. Besides red, green and blue subpixels it also uses a white subpixel, which helps to boost brightness. However, this comes at a price. At very high luminance some colour is effectively 'diluted' by the white light, so the saturation of certain colours can be slightly lower. In everyday use this isn’t a major issue, but in the most demanding scenes you can notice it.

We test televisions always in the best available factory mode – in the case of the Samsung QN80F, this is the Filmmaker mode, and indeed, it is this mode that offers settings closest to the creators' intentions. However, this does not mean that everything looks perfect. In SDR content, the biggest problem turned out to be an unbalanced white balance – slight deficiencies in green and a noticeable excess of red led to discernible colour errors, one could even say a pinkish tint on the screen. This was well demonstrated in the colour checker test, where the colours 'escaped' beyond their target fields – to the extent that even a sensitive viewer's eye could catch this without the aid of a meter.

In HDR content, the white balance was much better, but another issue arose – brightness management. The EOTF curve resulted in an overly bright image for most of the time, which could affect the perception of contrast and caused the screen to subtly 'flicker' during dynamic light changes. We have already written more about this in the paragraphs on black levels and HDR. Fortunately, Samsung leaves the user with plenty of options. The QN80F offers a rich set of calibration options, including a 20-point white balance – therefore, we decided to check what this television is really capable of after proper calibration.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes produce very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is, in any case, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. On SDR material the factory settings perform really well. Colour errors are small, the gamma response is correct, and the picture during normal viewing looks natural and does not feel overly "pumped up". It's a bit worse with HDR. When such content is played you quickly see that the white balance hasn't been set perfectly. Too much blue and red gives the image a slightly pink tint. This is also confirmed by colour gamut measurements and the ColorChecker, where samples clearly shift in that direction. It's not a flaw that completely spoils the picture, but it is noticeable with HDR films. Therefore anyone who wants the most faithful image should consider calibration, which we cover further on in the review.

After conducting a thorough calibration, it was possible to bring most of the image parameters to a really good level. The white balance in both SDR and HDR is nearly perfect – the picture is natural, neutral and devoid of the previously noticeable redness. The colours have gained depth, and the overall visual reception has become more pleasant and cohesive. It was also possible to partially master the brightness management, which in the factory version could be problematic. The EOTF chart shows that the television performs significantly better with brightness after calibration – there is no longer excessive dimming of certain elements. In films, it can still be noticed that the QN80F has a tendency to slightly brighten the smallest, light details – however, this is the effect of the device's design and the limited number of dimming zones. In short: not everything can be overcome, but what could be has been improved. After calibration, the QN80F makes a really good impression; it simply looks more mature and professional.

During calibration, we concentrated mainly on HDR content, because that's where the factory settings needed the most correction. We did not, however, neglect SDR mode, which after adjustment was brought almost to perfection. Colours are very accurate, and brightness is controlled as it should be. The biggest improvement in HDR came from fixing the white balance. Removing the excess red and blue eliminated the pinkish tint, and the image became much more natural. Skin tones, whites and all colours that had previously shifted towards pink improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. So the LG B6 can deliver a very accurate picture, particularly for the manufacturer's entry-level OLED model.

If, while watching lower quality materials – for example from YouTube – we notice strange colour transitions or unwanted artefacts, it's worth checking the settings and turning on the noise reduction feature. In our opinion, the best setting is at “medium” – it effectively smooths out problematic colour transitions while not blurring the entire image too much. However, one must know this: this option tends to remove film grain. If someone cares about preserving this effect (e.g. in older films), it’s better to simply turn it off – regardless of the level, the grain always disappears.

When it comes to resolution scaling (or so-called upscaling), Samsung – as usual – performs very well in this area. The QN80F may not compete with top models costing tens of thousands, but for its price class, it really does impress. Materials of very low quality (e.g. from SD television or older video files) are noticeably improved and look surprisingly decent. The only noticeable drawback is the typical Samsung issue with overscan – that is, slight cropping of the image edges in very low resolutions, e.g. 576p.

The LG B6 handles lower-quality material very well. This is largely thanks to effective digital image processing, which can mask some of the source’s imperfections without overly smoothing the whole scene. The "Smooth Gradation" function proves particularly useful. It noticeably reduces posterisation, especially in dark parts of the image. The safest choice remains the Low or Medium setting. The function still effectively smooths out unsightly tonal banding, but does not yet interfere too much with fine details. Purists can of course leave it switched off. Upscaling to 4K also performs very well. Full HD and 720p material retain a good amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations only become apparent with very poor sources below 720p, where the smallest text and fine elements are not always perfectly sharp, but this applies to almost every other TV on the market.

QN80F is truly a "fast" television. The applied panel offers a refresh rate of up to 144 Hz, which in practice means that the screen keeps up with the action – whether we're watching a film, playing games, or browsing dynamic content online. The image doesn’t stutter, isn’t excessively smeared, and overall looks simply smooth and pleasing to the eye. Of course, the manufacturer hasn’t forgotten about cinema fans – in the settings, we’ll find an option to adjust motion smoothness, allowing us to tailor the effect to our personal preferences. We can maintain a more "framey" appearance (for those who enjoy the classic cinematic vibe) or ramp up the smoothness to a higher level for a theatrical smoothing effect. Importantly, the choice is ours. Watching films and playing on the QN80F is simply a delight.

One of the biggest advantages of OLED panels is the very fast pixel response time. This keeps the picture sharp and free of the visible smearing often seen on LCD TVs. However, there is a downside. During slow camera pans motion can look choppier than on LCD screens, where some of that effect is naturally masked by the slower panel. Fortunately, on the LG B6 this can be easily mitigated using the TruMotion system. With the motion smoothing set correctly you can achieve smoother motion without giving the picture an exaggerated soap opera effect.

Samsung QN80F is a television that delivers on almost every front when it comes to gaming. We have a 144 Hz panel, four fully-fledged HDMI 2.1 ports, support for gamers in the form of Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM), and even one of the best-designed game bars on the market. The cherry on top is the motion smoother, which – uniquely in the world – works in games without significantly increasing input lag. Sounds like an almost perfect television for gamers? And indeed, it is almost that.

[UPDATE] We have updated our reviews of Samsung televisions from the 2025 model year due to the release of firmware version 1131, which restored the critical gaming feature HGiG.

As usual, Samsung does not support Dolby Vision in games, but that no longer surprises anyone. However, it is much more surprising that... the HGIG function has disappeared – the system that allows the console (e.g. PlayStation 5 or Xbox Series X) to precisely adapt HDR tone mapping to the capabilities of the television. In the latest firmware update for the 2025 models, this option simply vanished. It looks more like a mistake than a deliberate move, but it must be honestly noted that at the time of writing the review, the HGIG function is simply not available.

And it is precisely because of this one absence that the QN80F shifts from being nearly perfect for gamers to being 'almost' perfect. It's a shame – because everything else suggested that Samsung could raise the bar very high again in this generation.

LG OLED B6 has plenty to offer gamers; it’s simply a complete base for PS5, Xbox Series X/S or a capable PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can avoid irritating cable swapping when connecting several newer devices at once. It offers a full suite of synchronization technologies, from standard VRR to G-Sync and FreeSync. The screen synchronises the refresh rate seamlessly with the frame output from the console or graphics card. Of course it includes ALLM: the B6 automatically recognises when a game is running and immediately reduces latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG standard means that, after initial calibration in the console settings, the image won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on the cake is the Game Bar. Instead of digging through the full menu during gameplay, a single click is enough to adjust shadow visibility, tweak selected parameters or simply check the current display mode. All of this makes the LG B6 an excellent choice for gamers.