Samsung Q6F (IPS) vs XIAOMI S Mini 2026 (55"-75") 60Hz

The Samsung Q6F is, unfortunately, a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is a value that is decidedly too low to even talk about any effect of “high dynamic range,” or HDR. In practice, it’s better to stick to content in SDR format, which simply looks more predictable on this television. Another problem is the global dimming technique – in scenes with a lot of black, the television drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and the brightness can drop below 100 nits. The only consolation is supposed to be the QLED technology, but even here it is average. The layer of quantum dots used is not of the highest quality, as the coverage of the DCI-P3 colour palette does not exceed 90%. As a result, the colours in HDR content may simply appear under-saturated.

When it comes to HDR, the capabilities of the Xiaomi S Mini 2026 are really good, especially given the segment this model belongs to. The TV reaches around 1,000 nits of brightness without much trouble, allowing it to show a very pronounced HDR effect in bright scenes. The sun, reflections and brightly lit parts of the image can be really intense and at times almost striking in their brightness. It is a bit different in dark scenes, though. Very small light sources surrounded by black are displayed at much lower brightness, so they lack that pinpoint intensity seen on the best TVs. That said, this is not unusual for a Mini LED. The local dimming algorithm reduces the backlight to preserve the deepest possible blacks, which in such scenes matter more than a few extra nits.

HDR colours

Colour reproduction also performs well. Xiaomi markets the S Mini 2026 as a QLED TV, although the solution used here is effectively based on a PFS phosphor. The result is what matters, and it's quite good. Our measured coverage of the DCI-P3 gamut was about 94%, while in the much wider BT.2020 colour space it was about 74%. This means the TV can reproduce most colours used in HDR films with suitably high saturation. Its limitations are most visible with very intense shades of green, where the colour gamut starts to run out.

We tested the television in Filmmaker mode, which showed us two completely different facets of this model. Looking at SDR content, we were genuinely shocked at how good this television looks straight out of the box. It was really difficult to find fault with anything here. Despite a slight 'muddiness' in the white balance or somewhat brightened details in the blacks (which directly stem from the design of the IPS panel), the colour errors hovered around a level of '2'. This result is not only surprisingly good but downright amazing, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colours after switching to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so enormous that our charts literally ran out of scale. Of course, since Samsung even in such an affordable model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

We tested the Xiaomi S Mini 2026 in sizes from 55 to 75 inches in Film mode, which offered the most accurate colours compared with the other presets. That did not mean the picture was correctly set up straight away. In our sample the white balance was clearly shifted towards warmer tones. There was too little blue and too much red, so whites and greys had a slightly warm tint. The TV also tended to brighten darker parts of the image too much. This was due to the gamma, which instead of staying around 2.4 dropped in places to about 2.0. As a result there was more detail visible in the shadows, but the image lost some depth. The factory settings were therefore not bad, but there was still some way to go to achieve accurate image reproduction.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at the '1' level are something generally seen in devices costing several thousand pounds. In this regard, the Q6F is really an excellent screen for everyday television, less demanding series or films. Unfortunately, our intervention in the HDR mode did not bring a noticeable improvement. The television, due to its poor blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR exists mainly as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

Contrary to appearances, the Xiaomi S Mini 2026 responds quite well to calibration. After our adjustments the white balance was noticeably improved and the picture stopped leaning towards overly warm tones. With SDR material the effect is really good, and the TV can render such content very accurately; it is hard to fault it on colour reproduction. We applied similar corrections for HDR, though not everything could be fixed there. Colours look better than on the factory settings, but the TV still tends to display the image a little brighter than it should. This is visible in the EOTF curve, which sits above the reference value. In practice this means some HDR scenes are brighter than the creators intended. It is a quirk of this TV and we have no influence over it.

Q6F performs very well in upscaling lower-resolution content to native 4K. The scaling here is surprisingly good, even for such an inexpensive television from the QLED series. The only downside is the situation where we are watching very low-resolution materials, such as 576p (typical for old DVD players) – in which case the image may be slightly cropped. This is due to the fact that the television does not allow the Overscan function to be turned off, which is a typical issue with Samsung devices.

The situation is completely different when it comes to digital processing, specifically the attempt to smooth the image of unwanted artifacts. Here the television completely fails. Although there is a function in the menu called "Noise Reduction," it yields no visible results regardless of the slider setting. The only thing it manages to do is introduce undesired errors in the image. Despite its presence in the system, we definitely do not recommend using it.

Digital image processing in the Xiaomi S Mini 2026 is handled by the MT5896 processor. Unfortunately, in this respect the TV is rather mediocre. Low-resolution content is not scaled very well, and its limitations quickly become apparent on a large screen. The picture looks quite digital, and the TV cannot bring out many extra details. Additionally, overscan cannot be turned off for low-resolution content. The situation is even worse when it comes to smoothing posterisation. On the smaller models there is not even a dedicated setting to reduce visible banding between similar shades. So if such imperfections are already present in the source material, Xiaomi essentially does not mask them.

The 60 Hz panel in the Samsung Q6F is standard for this price range, making it rather average for dynamic sports or gaming. However, when it comes to films, the television performs quite well thanks to the motion smoothing feature. The "Motion Reduction" option allows you to adjust the smoothness of movement to your own preferences – from maintaining a cinematic character to complete fluidity.

The smaller variants of the Xiaomi S Mini 2026 use a 60 Hz panel, and that is their biggest limitation when it comes to motion. For films and series this is not yet a major issue, because the TV has a classic motion interpolation for 24/30 fps material. So we can reduce the characteristic judder and adjust the motion settings to our own preferences. Sports and other 50/60 Hz content fare worse, because there is no additional function to improve smoothness. In such material we are therefore limited by the panel's capabilities.

In terms of motion blur the TV performs quite typically for a VA panel. Most trailing is visible behind objects moving on a dark background, while in brighter scenes the effect is noticeably reduced. It is not at a level that completely ruins the perception of motion, but in dynamic scenes you can tell the panel is not among the fastest.

We're not going to beat around the bush – the Q6F is not a television designed for gamers. Although it features additions like ALLM (automatic low latency mode) and VRR frame synchronisation for consoles, the list of advantages basically ends there. Aside from these basics, the television offers nothing more that would satisfy those who spend a lot of time in front of a console. It’s a great shame that such a useful tool as Game Bar, which allows for quick control of game parameters in Samsung's higher models, is missing here. In terms of gaming, this model is absolutely basic and is only suitable for "casual" gamers.

In larger sizes the Xiaomi S Mini 2026 is a much more interesting proposition for gamers. The panel natively runs at up to 144 Hz, so when connected to a PC you can use the high refresh rate even in 4K. At lower resolutions the TV can go even further, reaching up to 288 Hz. It also supports ALLM, automatic switching to game mode, and a Game Bar with the most important settings to hand. Of course, the TV has two full-bandwidth HDMI 2.1 ports. In terms of smoothness the difference compared with the 55 to 75-inch versions is therefore significant and especially noticeable with a PC or console. Not everything works perfectly, though. As with the smaller variants, we have reservations about the implementation of HGiG. The HDR setup screens on the PS5 and Xbox do not accurately match the TV's real capabilities, so if you set your console according to those prompts the brightest parts of the image can be blown out and lose some detail.