Samsung OLED S95H (S99H) (QD-OLED) vs SONY BRAVIA 3 II (XR35M2)

When it comes to brightness alone, the S99H is an astronomically bright TV. Its peak brightness in film scenes can exceed 2800 nits. Whatever the scene, you can count on powerful HDR effects that are almost blinding, exactly what you expect from a top-tier screen. It is the nature of OLED panels that they cannot sustain the same extreme brightness in very bright, full‑screen frames as they can with small highlights, but the results are still excellent. In a bright scene from the film The Meg, the sun still exceeded 2200 nits. That means the S99H managed to sustain higher brightness than most Mini LED displays on the market. In terms of brightness, the S99H is currently the best OLED TV we have tested.

Colour gamut coverage

The S99H also handles colour extremely well, which is a direct result of the QD-OLED panel used here. Whether the test scenarios were synthetic test patterns or measurements taken with film material playing in the background, the results remained at a very high level. The S99H easily covers almost 100% of the DCI-P3 gamut, and for the more demanding BT.2020 colour space it reaches nearly 90%. That is absolute top-tier performance. These results match what we have seen in the new SQD-Mini-LED screens, and in real film scenes even outperform RGB Mini LED displays.

Bravia 3 II is certainly not a TV that tries to impress with brightness. In our measurements it reached about 450 nits, so it falls well short of the brightest models on the market. That does not mean HDR is just a paper feature. Compared with ordinary SDR material, the brightest elements of the image can already come through noticeably, and reflections, highlights and stronger exposures have a bit more energy and stand out better from the rest of the scene. This is most obvious in simpler shots where the screen displays many bright elements. Then the Bravia 3 II can give a hint of a higher dynamic-range picture. The problem only begins with more demanding content, where much greater brightness headroom is required. There the TV quickly shows its limitations and instead of powerful, striking HDR we get only a competently rendered picture.

Colours

Bravia 3 II uses a QLED-type panel, although technically it does not use a classic quantum dot layer. Instead Sony has used a solution based on PFS phosphor, which performs a very similar role: it allows more saturated reds and greens and thus enables a much wider colour gamut. In measurements DCI-P3 coverage was around 94%, and the very wide BT.2020 around 74.4%. These are good results for this class of hardware, which mean the Bravia 3 II has no problem reproducing sufficiently saturated colours in HDR content. Colours do not look washed out, and more intense hues can look genuinely attractive.

Samsung offers a whole host of picture modes and features, but as usual we recommend choosing Filmmaker Mode, especially if you want the most faithful rendering of the filmmakers' intent. Out of the box the TV is tuned very well, although it has minor shortcomings. These are mainly a slight drift in the white balance in SDR content and a slightly low gamma. As a result, in darker viewing conditions the picture can be a little too bright compared with the reference gamma of 2.4, which is the standard for watching films with the lights off. These are, of course, minor points, because overall colour reproduction remains at a very good level and the errors in the ColorChecker measurements are not large. However, we know that with a screen of the S99H's class you can, and arguably should, expect even more, which is why we carried out a professional calibration.

In Professional mode the Bravia 3 II already delivers a fairly good level of colour reproduction straight out of the box. In SDR the most noticeable issue is a slightly low gamma, which makes the midtones a little brighter. White balance isn't perfect either; as brightness increases the blue and red components become slightly lacking, so whites can at times take on a marginally warmer, faintly greenish tint. These are not faults that immediately catch the eye when watching a film. Average error values hover around 3, so the factory setting can be regarded as quite good. The situation is similar in HDR. Here too there is a slight lack of the blue component, so the image is marginally warmer than the reference, but the difference is not large enough to significantly interfere with normal viewing.

After professional calibration, FILMMAKER mode looks practically perfect. Because Samsung offers a rich set of advanced calibration features, we were able to fine-tune the colours to an almost perfect level. Above all, we managed to even out the white balance and the gamma curve, which resulted in noticeably improved contrast and proper image modelling. In this tuned picture profile there really isn't a single thing to criticise or call a flaw. After calibration, the S99H can deliver an essentially reference-quality image.

After calibration, there is particularly a lot to be gained from SDR content. The white balance was set almost perfectly, the gamma practically matches the reference value, and the average colour errors fell from around 3 to about 1. That is already a level at which differences from the reference image are, in practice, very difficult to detect. The Bravia 3 II therefore shows that, despite its position in Sony’s lineup, it has quite a lot of potential for precise picture calibration. Improvements are also visible in HDR, although here it is no longer possible to avoid all the limitations of the TV itself. After evening out the colours, it is easier to notice that the EOTF curve in film content runs slightly below the reference value in places, so the Bravia 3 II gently darkens part of the image. This is not an ideal solution from a reference point of view, but in this particular TV it also has its benefits. With no local dimming and average black levels, this behaviour slightly reduces the visibility of the backlight in darker scenes and helps maintain a stronger impression of contrast. So you could say Sony partly masks the limitations of the panel this way, instead of trying at all costs to stick to the reference luminance.

The proprietary Samsung NQ4 Gen3 processor is responsible for upscaling and digital image processing. It handles upscaling lower-resolution material to 4K very well. The picture is clear without looking artificial or overly sharp. The only rather specific drawback appears with very old material recorded at 480p or below. In such cases the TV can slightly crop the edges of the picture.

The processor also copes quite well with artefacts visible in lower bit-rate material, for example heavily compressed YouTube videos. The noise reduction function effectively smooths the image and reduces posterisation, but it operates quite aggressively. It can remove not only unwanted artefacts but also some fine detail, and even natural film grain. Wanting to preserve the source material as faithfully as possible, we decided not to use it. However, if someone prefers a clean, as-smooth-as-possible picture over retaining every detail, it may prove useful.

The Bravia 3 II is Sony's first TV to use the new MediaTek Pentonic 800 chipset, and there are a few changes in image processing. Starting with the basics. The upscaling itself is adequate. The TV can sensibly pull up lower-resolution material and does not have a strong tendency to over-emphasise jagged edges or other source imperfections. With regular broadcast TV or weaker streaming material the picture therefore remains quite pleasing. We have more reservations about the digital image processing. In this model Sony has replaced the well-known "Smooth Gradation" function with a new setting called "Digital Noise Reduction". Its role is essentially very similar: it is supposed to smooth unpleasant tonal transitions and artefacts resulting from heavy signal compression. Unfortunately, this function performs noticeably worse than before. At the "High" setting (the only one that had any visible effect) the TV can smooth away too many elements of the image at once, causing film grain to disappear and the texture of objects or even skin to start looking unnatural. Worse still, the effect is not particularly stable. When a scene contains more motion, the function's effect clearly weakens and at times it looks as if the TV stops intervening in the picture altogether. For everyday viewing we therefore would not recommend using it at a high level. It can help on a static shot, but the price is often an excessive loss of detail.

Another major advantage of organic OLED panels is their excellent motion handling. Thanks to the pixels' virtually instantaneous response time, the Samsung S99H exhibits virtually no motion blur. Fast-moving objects do not produce visible halos or trailing outlines, so the television performs very well for both watching sport and gaming. One characteristic of OLED screens compared with LCDs, however, is the way they render low-frame-rate material. With very slow camera movement the image can appear noticeably more 'choppy'. This can, however, be fairly effectively mitigated using a frame-interpolation system. Samsung lets you adjust judder reduction and blur reduction separately, so it's easy to find a compromise between smoother motion and preserving the cinematic character of the content.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120Hz VA panel, a solution that, by nature, despite the high refresh rate, does not always cope well with motion blur. Here, however, Sony has managed to keep that problem very well under control. Fast-moving objects remain crisp, and the characteristic trails and blurring are reduced to a very low level, if not to zero. It is one of the least motion-blur-prone LCD TVs we have tested. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive True RGB flagship series, the Bravia 9 II.

The Samsung S99H is also a great TV for gamers. It offers almost every possible and useful feature... well, except for the obvious lack of Dolby Vision for the Xbox console. It's equipped with four full-bandwidth HDMI 2.1 ports that offer the full 48 Gbps. This lets you use VRR frame-rate synchronization and the automatic game mode (ALLM) without any problems. This year Samsung also has no issues properly supporting HGiG, so HDR setup on a console is quick and straightforward. Samsung's TVs are also known for interesting extras. In the Game Bar menu you'll find options to add an on-screen crosshair, enlarge the minimap or change the displayed image's aspect ratio (PC).

Particularly noteworthy is Samsung's Game Motion Plus feature. It's Samsung's proprietary motion-smoothing system that uses interpolation to increase smoothness in games. Input lag then rises to around 40 to 50 ms (depending on the strength of the setting), which is an excellent result compared with the competition. The system makes gameplay noticeably smoother. So if someone has their eye on a demanding game (e.g. GTA 6 😉) that runs on a console at only 30 frames per second, the S99H can display it much more smoothly than competing models.

Sony Bravia 3 II is a very good TV for gamers, although not everything has been implemented exactly as we would like. The biggest change concerns the connectors. For the first time in a Sony TV we get as many as four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the issues that has plagued this manufacturer’s TVs for years. We can connect several devices at once and on each input use the device’s full capabilities, for example VRR or ALLM. There is also a simple Game Bar that lets you view key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game. However, there are two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. That will not be a problem for everyone, but people using that resolution on a console or PC, for example to get higher frame rates in certain games, will have to choose 1080p. We have more reservations about HGiG support. Sony does not allow you to disable the TV’s tone mapping on the Bravia 3 II, so the screen is always processing HDR content even when you would prefer to leave that task to the console. This is most obvious during HDR setup — the checkerboard pattern does not disappear at the point that corresponds to the TV’s actual capabilities. That does not mean HDR in games will look bad. You just need to approach the setup a little differently and, instead of relying on the pattern, manually set the peak brightness to around 450 nits. The issue can be worked around, but you should know about it before you start setting up the console.