SAMSUNG OLED S95F (QD-OLED) vs Philips PUS7000

The new generation of QD-OLED matrices in the Samsung S95F shows its full potential, with brightness results that are truly stunning. In test film scenes like "Life of Pi" or "Sicario 2," where smaller light elements appear – stars, the moon, or headlights – the television managed to achieve over 2000 nits of brightness. This is a result that surpasses even most top-of-the-range Mini-LED models.

The secret lies in the technology itself – instead of a limited number of dimming zones like in Mini-LED televisions, here we have millions of emitting pixels, allowing the television to fully showcase its power without technological compromises. Of course, as this is still an organic panel, in full-screen scenes flooded with white – like in the final sequence of the film The Meg – the brightness drops to around 1400 nits. Nevertheless, the result remains excellent and clearly exceeds what any OLEDs, both QD-OLED and WOLED, have offered so far. The colour reproduction is also particularly noteworthy. Thanks to QD-OLED technology, the television achieves nearly 100% coverage of the DCI-P3 colour space and about 80% in BT.2020. These values make HDR images not only dazzling in brightness but also captivating in the richness of colours.

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The best picture mode straight out of the box is undoubtedly Filmmaker Mode – a mode that Samsung has been using for several years, designed to faithfully convey the creators' intent. In SDR content, its implementation is not bad, although some imperfections can be observed. The image is slightly dimmed, and the screen has a subtle pinkish tint due to the dominance of red and blue in the white balance. Colour errors were maintained at a level of 3–4 ΔE units – and for those who are not familiar: a value above 3 is the threshold at which the average human eye starts to notice differences.

However, much greater problems arise in HDR content. Here, the white balance was not such a significant issue – a slight excess of blue did not significantly hinder the viewing experience. The problem became managing brightness. In practice, the television "blasted" the image too much, causing details in the blacks to completely disappear. The final effect was far from expected, and colour errors in this mode became quite pronounced. It's hard to say why such a design decision was made, but it was evident that the factory HDR settings did not allow this television to showcase its full capabilities.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

After calibration, it was possible to make subtle adjustments to the white balance and significantly improve the image characteristics. In SDR content, the quality has become practically reference-level – most colour errors have fallen below a ΔE value of 1, which is the level at which the human eye can no longer discern differences. This is a result that places the S95F among the very best televisions available on the market.

In HDR materials, the calibration also brought about a significant improvement. The television's tendency to blow out highlights has been brought under control, as confirmed by the analysis of the EOTF curve. A slight tendency to brighten the entire scene or occasional loss of detail in blacks can still be observed, but this does not significantly affect the overall perception. After calibration, the S95F reveals its full potential and can be described as one of the best televisions on the market!

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

The Samsung S95F offers a noise reduction feature that is responsible for smoothing tonal transitions. It works very effectively, but in practice, it can be overly aggressive. Materials of lower quality – e.g., older recordings or videos from YouTube – become soft and plastic when this feature is activated, resembling an image digitally smoothed in a graphic program. Unfortunately, the natural film grain, which often adds authenticity to the image, disappears in the process. Fortunately, the television does not lose too many fine details, such as in skin textures or elements of the surroundings. Therefore, this feature is best used with discretion – depending on preferences, one can achieve a smooth image that is less natural, or one that is truer to the original. In our opinion, the most universal choice is the “Standard” setting.

The image scaling performs significantly better. The television handles materials of lower resolution well – even content at 576p looks quite decent, although a slight blockiness can be noticed. Overall, the effect is very good, although it somewhat falls short of what Sony Bravia 8 (II) or LG G5 can achieve. It is also worth mentioning a minor imperfection of the S95F – in older materials, overscan may occur, causing a slight trimming of the left edge of the image.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

The Samsung S95F shows phenomenal performance in terms of motion fluidity. The panel operates at a native resolution of 4K with a refresh rate of up to 165 Hz, and combined with QD-OLED organic technology, it delivers incredible results. Sports and games look stunning – the image is fast, dynamic, and very natural. Additionally, the built-in motion smoother and motion blur reduction system allow you to tailor the character of the picture to your own preferences. You can opt for a more "frame-like" effect with visible film structure or a smooth, theatrical spectacle. Every viewer will find a setting that suits them.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

The advantages of low motion blur and excellent motion fluidity characteristic of OLED panels are just the beginning, as the Samsung S95F has been designed with gamers in mind. The manufacturer has equipped it with four HDMI 2.1 ports – although limited to a bandwidth of 40 Gb/s, in practice this has no impact on compatibility with consoles or PCs. We get a full suite of gaming features: variable refresh rate (VRR), automatic game mode (ALLM), as well as a very well-implemented HGiG standard, which ensures that HDR titles look exactly as their creators intended. Completing the package is the Game Bar – a clear settings hub where we can preview and change all key image parameters with one motion. The proprietary motion smoother, Game Motion Plus, also deserves commendation, as it can smooth out animations, which is particularly useful in productions running at 60 frames, where stability is not always exemplary. While support for Dolby Vision in games is lacking, it’s hard to view this as a serious drawback – Samsung compensates with other solutions. This is one of the best, if not the best, gaming televisions available on the market today.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.