Samsung Neo QLED QN70F / QN74F / QN77F vs Philips MLED920 / MLED910

The QN70F is a television that can pleasantly surprise when it comes to brightness. In ideal testing conditions, it reaches up to 800 nits, which – for this price range – is a really solid figure. Of course, this result comes from measurement charts, so we decided to check how it performs in practice, with real films. Here, the television somewhat tempers its capabilities. In most tested scenes – for example, in "The Meg" – the actual HDR brightness hovered around 500 nits. This is still a decent result, allowing for enjoyment of HDR effects, although it is far from perfect. On the other hand, we have a QLED screen with a layer of quantum dots, which means very good colour reproduction capabilities. The colours are vibrant and saturated. The QN70F covers about 94% of the DCI-P3 colour space, and in the wider BT.2020 palette, it exceeds 75%, so in this respect, there is nothing to be ashamed of.

Philips MLED920 in our measurements in static tests even reached around 900 nits, which is really a solid result for a mid-range model. In practice, this translates to a lot of satisfaction during viewing sessions – in scenes rich in bright light, such as the first, third or fifth test slide, the screen managed to generate about 700 nits, which is sufficient to feel the true "HDR effect." However, it cannot be denied that the limited number of dimming zones and the compromises typical of mini-LEDs in more demanding scenes reveal their nature. In sequences with small light sources – like the moon or a scene from the film Sicario 2 – the television clearly prioritises maintaining deeper blacks at the expense of the brightness of these small elements. For most viewers, this is still a reasonable compromise, as the dark background looks significantly better, though it is important to be aware that the details themselves may not impress with their intensity. There is also a certain sense of dissatisfaction regarding the colours. Although the applied PFS filter (the equivalent of quantum dots known from QLEDs) does its job and the colours appear quite vivid, the coverage of the DCI-P3 palette reaches “only” 90%. In everyday viewing, this will be sufficient, but in extremely colourful productions – like the latest Disney animations – one can notice that some tones are not as vibrant as they could be in other setups.

We tested the QN70F in its best default picture mode, which is Filmmaker Mode. I must admit that in this particular test unit, the factory settings performed quite well. The image was calm, natural, and despite minor deviations – pleasant to watch. The biggest flaw was a slight dominance of red in the white balance, which caused a slight pinkish hue across the entire scene. However, this was not a glaring defect – rather subtle and only noticeable when directly compared to a properly calibrated screen. A somewhat larger issue arose in the brightness characteristic. The television tends to underestimate the brightness of parts of the image that should be displayed more brightly. As a result, some details can appear slightly muted – not so much lost completely, but not resonating as clearly as they should. Nonetheless, as far as televisions in this category and in these settings are concerned – we consider the result a good starting point for further calibration.

Like every Philips television we tested, we primarily assessed the MLED920 in Filmmaker mode – this is meant to be the "most honest" mode, designed for films and to faithfully convey the intentions of the creators. Indeed, in terms of colour reproduction, it performs the best among all the modes available on the television, but it is not without flaws. The first thing that catches the eye is the white balance. The image has a slight tendency towards purple-pink tones, which gives it a somewhat unnatural character. An even bigger problem, however, turned out to be what we mentioned earlier – image blooming. Just looking at the gamma or EOTF charts reveals that the line significantly deviates from the norm, dropping below a value of 1.8. In practice, this means "bleeding" of the brightest whites, where the image becomes almost milky. Fortunately, most of these issues can be corrected – the MLED920 responds well to calibration, and with a few adjustments, one can significantly improve the viewing experience.

After calibration, the QN70F shows that it can offer a truly high level of colour reproduction. The white balance was nearly perfectly aligned, and the values in the Color Checker test dropped below level 3 – meaning below the threshold at which the average eye can perceive differences. The image looks natural, and the colours are faithfully rendered, without excessive saturation or the coolness known from factory settings. It must be admitted that Samsung provides very extensive calibration options – not only for enthusiasts but also for professionals. The QN70F takes advantage of this potential and, after proper adjustment, can come close to significantly more expensive models in terms of colour accuracy. The only thing that can still be nitpicked is the brightness characteristic. There is still a tendency to lighten the smallest areas of the image – particularly those that should remain darker. However, this is a design feature of this model, not a calibration error. Despite this, the final effect definitely deserves recognition.

After calibration, we managed to largely tame the white balance – to the extent that the average viewer will not be able to detect distortions in colours. The characteristic pink-purple haze that previously disrupted the naturalness of the image has also disappeared. The colour palette has been organised, and the colours appear more coherent and neutral. The gamma in SDR content post-calibration looks really good – there is no longer any mention of the previous 'bleeding' effect in bright scenes. The image has become more contrasty and devoid of that milkiness which had previously greatly harmed the viewing experience. In the case of HDR content, the improvement is also noticeable, although here it is still evident that the television is going 'its own way'. The EOTF curve cannot be fully shaped, as Philips simply does not offer the tools to allow precise control over this parameter in its settings. In many films, the television still exposes the image 'in its own way'. Despite these limitations, the calibration has delivered quite a bit of good – most of the colour distortions have been minimised, and the overall balance of the image has significantly improved. However, it must be noted that certain barriers stem from the very design of the hardware and simply cannot be overcome.

Samsung QN70F offers a distortion reduction feature that enhances the smoothness of tonal transitions. In "Standard" mode, it works quite well – it smooths out problematic transitions without significantly interfering with the structure of the image. Film grain is somewhat reduced, but details such as texture and skin structure remain visible. The "High" mode is much more aggressive. The smoothing is stronger, but it comes at the cost of a noticeable loss of detail. Therefore, in practice, we recommend sticking with the "Standard" setting or completely turning this function off. The improvement in gradation may be less spectacular, but the image retains more naturalness.

When it comes to scaling low-quality content, the QN70F performs very well. Tests with lower resolution images were really very good. Despite slight edge ringing, everything looks clean and clear, even if the original content was very poor. It’s just a pity that the television has an issue with overscan, which cannot be completely turned off. As a result, images with very low resolution may be slightly cropped, which is mainly noticeable on subtitles or interfaces.

The manufacturer has equipped this model with several features that improve signal quality, and although we usually approach such "enhancements" with caution, here they prove to be really helpful. The key option is called "distortion reduction" – it works best at a medium level, as on one hand it effectively smooths out unwanted stair-stepping and colour banding, while on the other it does not excessively cut out details, allowing the image to still look natural.

Things are a bit worse with upscaling. Lower quality materials – such as the test video with the model – appeared soft and lacking in sharpness. Indeed, it can be partially corrected with the sharpness slider in the menu, but the effect remains far from what competitors in a similar price range offer. Philips therefore still needs to work on this element, as compared to the successful improvement of tonal transitions, the upscaling simply falls short.

The QN70F is a television with a refresh rate of 144 Hz, which in itself places it among the top when it comes to image fluidity. Whether we are watching dynamic sports broadcasts or playing on a console – the picture looks very good. There is no sense of stuttering, choppiness, or the typical "tearing" associated with weaker models during fast motion. Samsung also allows you to adjust the fluidity to your own preferences. In the picture clarity settings, we find options such as blur reduction and judder reduction – each of which we can adjust independently. This is especially useful when watching content with a lower frame rate and wanting to give it a smoother, more theatrical character – or conversely, to maintain the natural cinematic "feel" of 24 frames.

The Philips MLED920 features a 144 Hz panel, which immediately suggests that we shouldn't complain about motion smoothness. And indeed – the motion blur is relatively low for a VA panel, and although slight issues can sometimes be noticed on darker backgrounds, they are not something that would stand out to most people during regular viewing.

Another significant advantage is the presence of a motion smoother called “Motion Style.” It allows you to adjust the sensation of smoothness to your own preferences – if someone prefers a more “theatrical,” almost television-like image, they can increase the sliders, whereas if they prefer to maintain the natural “jumps” of cinematic frames, it’s enough to set lower values. This way, everyone can find their golden mean.

Samsung QN70F is truly a solid choice for gamers. Here we have as many as four HDMI 2.1 ports with full bandwidth of 48 Gbps, which means full support for gaming in 4K at a refresh rate of 144 Hz. Additionally, we have all the essential features we expect today: automatic game mode (ALLM), variable refresh rate (VRR), and a very well-designed, intuitive Game Bar that provides information on mode, resolution, and frame rate. Also noteworthy is the Game Motion Plus feature, which allows for the addition of artificial frames to games running at 60 fps or lower. It works surprisingly well and improves the smoothness of gameplay in many titles – especially those where consoles struggle to maintain a stable frame rate – without significant lag.

[UPDATE] We have updated our tests of Samsung televisions from the 2025 model year due to the release of software version 1131, which restored the crucial gaming feature HGiG.

Unfortunately, there are also some drawbacks. The lack of support for Dolby Vision mode is not surprising – that is a standard at Samsung. But the absence of the HGiG feature is much more disappointing. What's worse, it was removed by a software update, which may come as a shock to users who previously relied on it. Without HGiG, it is impossible to manually set the maximum HDR brightness from the console, resulting in some games appearing slightly washed out – especially if the television misinterprets the tonal range. Why did Samsung, a brand that has set the standards for gaming features for years, choose to take such a step? It's hard to say. At the time of writing this review, the tested television was running on software version 1110 – and to be honest, if you care about full support for gamers, it’s better to temporarily refrain from updates.

For gamers, the Philips MLED920 is truly a complete tool. The manufacturer has taken care of everything that is considered standard in televisions designed for consoles and PCs today. It features ALLM, so the console automatically switches the screen to game mode, alongside VRR and a refresh rate of 144 Hz, which guarantees smooth gameplay even in fast-paced titles. All key HDR formats are supported – including HGiG and Dolby Vision Gaming for Xbox – which means that regardless of what you are playing and on which console, the television will be able to extract the maximum potential from the image. The Game Bar also proves useful in daily gaming – a relatively simple implementation by Philips, but a functional panel where you can quickly check image parameters, enable VRR or adjust settings without leaving the game. It may not be as comprehensive as the competition, but it performs its task flawlessly. And finally, something that sets Philips apart from the competition – Ambilight. The three-sided LED backlighting can create a huge impression in games, especially in the evening. It's also a way to slightly 'extend' the screen and enhance the feeling of immersion. And as colourful LEDs have recently become almost a mandatory element of a gamer’s room, the MLED920 fits into this trend perfectly.