Samsung DU7192 (VA) vs Samsung The Frame LS03D

In the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, this value is too low to fully enjoy HDR effects, which require significantly higher luminance. In the tested materials, such as The Meg and Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely not enough when it comes to HDR. Additionally, the coverage of the DCI-P3 colour palette at 82% does not favour presenting HDR content in its full glory. The limited colour gamut makes it difficult for the television to reproduce vibrant and diverse colours, which is crucial for achieving a cinema-like experience.

Samsung The Frame LS03D performs really well with brightness. Results of 700 nits make bright elements on the screen look striking and detailed, whether they illuminate the entire screen or appear as small points of light against a dark background. In more demanding scenes, like the fourth sequence from the film Sicario 2, the black levels are average, but we have already discussed this in the section on contrast. As for brightness – the television definitely excels here. An additional advantage is the quantum dot coating, which is QLED technology. Thanks to this, the colour palette coverage has been improved, although The Frame does not stand out in this regard compared to the competition.

The best factory mode we relied on during testing turned out to be "Filmmaker". Although this mode is the closest to the creators' intent for films, it is not without certain imperfections. The white balance chart in both SDR and HDR clearly shows a dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as much impact on the perception of the image. The gamma, which is responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest parts of the image, it was too low, causing excessive brightness in those scenes, depriving the film of drama and contrast. For HDR, the white balance remains at a similar level; however, the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to a strong brightness in the darkest scenes. Then the result suddenly drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

Samsung offers several picture modes on its televisions, but undoubtedly the Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as is often the case with mass production, the differences between units can be considerable, and our tested model was not free from a few issues.

In the case of SDR content, the white balance leaned heavily towards red, with a slight boost in blue. This effect was particularly noticeable in comparison images – for example, in a photograph of a boy whose face was unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which detracted from its depth.

In 4K HDR content, the white balance was again dominated by red, this time in combination with green. Meanwhile, blue clearly lost intensity, which was easy to notice on the Color Checker palette, where colours began to "drift" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the television has a tendency to excessively brighten the image, especially in the darkest elements of scenes.

Overall, while it did not look terrible, it definitely required adjustment. Fortunately, Samsung offers extensive calibration options, which provides the chance for a significant improvement in image quality. Therefore, we proceeded with professional calibration to extract the full potential from this television.

Even for its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of the factory settings. We undertook this task, and the results turned out to be more than satisfying. The white balance, which previously exhibited a strong yellowish tint in both SDR and HDR, was significantly improved. Although slight deviations from the norm can be noticed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to properly shape the gamma in SDR materials, which allows for achieving the maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, was also improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a complete representation of the dynamics of HDR content. Nevertheless, after calibration, the image is clearly better and more aligned with the creators' intentions. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

After professional calibration, the Filmmaker Mode shows its full potential. The white balance in HD content is exemplary – errors at the level of 0.5 indicate almost perfect colour reproduction accuracy. The image now looks natural, and the colours are precisely as they should be. In 4K HDR content, the effect is not quite as perfect, but it still maintains a really high level. The colours are vibrant, well-saturated, and the overall picture quality can be impressive.

So where does the problem arise, given our praise for colour reproduction? Unfortunately, the entire experience is marred by brightness characteristics. The gamma in HD content looks decent, but in 4K HDR it's not as good. The EOTF curve shows that the television excessively brightens certain parts of the image, which is a result of construction limitations. The lack of local dimming means that the television cannot accurately control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nonetheless, after calibration, Samsung The Frame LS03D offers excellent colour reproduction, particularly in HD content, and the overall appearance is considerably better than before the settings were corrected.

The tonal smoothing function operates in two modes – "off" and "auto". Turning it off causes gradation issues, while the "auto" mode ensures smooth transitions, but at the cost of grain and detail, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling of lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation makes the television perform better with higher resolution content.

It’s time to check how Samsung The Frame LS03D performs with older, lower-quality materials. We already know that the fluidity of tonal transitions is at a very high level here, so we were curious to see how the television would handle smoothing them out.

The noise reduction feature in the "Standard" setting does its job well – tonal transitions are noticeably smoothed out, and at the same time, the image does not lose too much detail. However, it is worth noting that this effect also smooths out film grain, so its use will be a matter of individual preference.

When it comes to image scaling, the television also performed really well. The test chart turned out solid – the model was reproduced correctly, with clear details. The branches in the background, though slightly frayed in places, generally appear natural and do not stand out as imperfections.

Although the Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with motion smoothing technology. While the functionality of this solution is significantly limited compared to more expensive models, its presence alone distinguishes the television amidst competitors in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of films and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we can find, among other things, the "Judder Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the picture exhibits the characteristic stutter known from materials recorded at 24 frames per second, making this feature practically ineffective.

Firstly, it is worth noting that the model we tested in the size of 55 inches, like the 65, 75 and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series only offer 60 Hz panels, which is worth keeping in mind when making a purchase. As for improving motion fluidity, the television offers a feature called “Picture Clarity”. This is a classic motion smoother that gives users the ability to adjust it using two sliders:

Motion blur reduction – this controls the sharpening of the image in dynamic scenes. The higher the value, the less blur during quick camera movements or moving objects. However, overly aggressive settings may cause the image to become unnatural, appearing like a “soap opera”.

Judder reduction – this slider influences the smoothness of frame playback, particularly in materials with a lower frame rate, such as films (24 fps). Higher settings can smooth motion but may also lead to excessive “plasticity” of the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to one’s own preferences. It is worth experimenting with the settings to find the perfect balance between fluidity and a natural appearance of the image. We recommend setting them as shown in the picture.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers a basic feature for gamers – automatic switching to low latency mode (ALLM), and support for basic HDR for games in the HGiG standard. HGiG allows for the display of HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for full enjoyment of the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance user comfort, especially for those who frequently change display modes.

The Frame LS03D in the 2024 version has been equipped with four HDMI ports, but only one of them supports the 2.1 standard with a bandwidth of 40 Gb/s. This is important information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC.

In terms of features for gamers, The Frame truly has a lot to boast about. Here we find ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and HGiG. It is worth highlighting that HGiG has been very well implemented here, which is particularly important as the television does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG turns out to be a better standard for gaming.

Samsung has also not forgotten about features that enhance gaming comfort. Game Bar is an advanced panel for gamers that allows for quick adjustment of screen settings without the need to dig through the television's menu. We can even change the aspect ratio from 16:9 to a panoramic 21:9, which may be a significant advantage for some gamers.

However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoothness enhancer dedicated to games that adds additional frames of animation without significantly affecting input lag. The effect is truly noticeable – the image appears much smoother, which fans of dynamic titles will particularly appreciate.

In summary – Samsung The Frame LS03D is a television that offers a solid set of features for gamers. While the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions makes gaming on this television a truly enjoyable experience.