Samsung DU7192 (VA) vs Philips PUS7000

In the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, this value is too low to fully enjoy HDR effects, which require significantly higher luminance. In the tested materials, such as The Meg and Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely not enough when it comes to HDR. Additionally, the coverage of the DCI-P3 colour palette at 82% does not favour presenting HDR content in its full glory. The limited colour gamut makes it difficult for the television to reproduce vibrant and diverse colours, which is crucial for achieving a cinema-like experience.

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The best factory mode we relied on during testing turned out to be "Filmmaker". Although this mode is the closest to the creators' intent for films, it is not without certain imperfections. The white balance chart in both SDR and HDR clearly shows a dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as much impact on the perception of the image. The gamma, which is responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest parts of the image, it was too low, causing excessive brightness in those scenes, depriving the film of drama and contrast. For HDR, the white balance remains at a similar level; however, the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to a strong brightness in the darkest scenes. Then the result suddenly drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

Even for its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of the factory settings. We undertook this task, and the results turned out to be more than satisfying. The white balance, which previously exhibited a strong yellowish tint in both SDR and HDR, was significantly improved. Although slight deviations from the norm can be noticed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to properly shape the gamma in SDR materials, which allows for achieving the maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, was also improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a complete representation of the dynamics of HDR content. Nevertheless, after calibration, the image is clearly better and more aligned with the creators' intentions. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

The tonal smoothing function operates in two modes – "off" and "auto". Turning it off causes gradation issues, while the "auto" mode ensures smooth transitions, but at the cost of grain and detail, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling of lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation makes the television perform better with higher resolution content.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

Although the Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with motion smoothing technology. While the functionality of this solution is significantly limited compared to more expensive models, its presence alone distinguishes the television amidst competitors in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of films and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we can find, among other things, the "Judder Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the picture exhibits the characteristic stutter known from materials recorded at 24 frames per second, making this feature practically ineffective.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers a basic feature for gamers – automatic switching to low latency mode (ALLM), and support for basic HDR for games in the HGiG standard. HGiG allows for the display of HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for full enjoyment of the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance user comfort, especially for those who frequently change display modes.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.