Samsung DU7192 (VA) vs Hisense E7Q PRO / E79Q PRO

In the luminance charts, the peak brightness of the television is around 280 nits. Unfortunately, this value is too low to fully enjoy HDR effects, which require significantly higher luminance. In the tested materials, such as The Meg and Gemini Man, the lack of adequate brightness severely limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently highlighted. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely not enough when it comes to HDR. Additionally, the coverage of the DCI-P3 colour palette at 82% does not favour presenting HDR content in its full glory. The limited colour gamut makes it difficult for the television to reproduce vibrant and diverse colours, which is crucial for achieving a cinema-like experience.

When it comes to the quality of the HDR effect, the E7Q PRO is unfortunately not a television that can impress with brightness alone. In real film materials, we measured around 250–300 nits, which is simply too little for HDR to look spectacular. There is a lack of that "spark" in bright details, highlights, and light effects, and in many HDR scenes, it can resemble good SDR more than true cinematic HDR. The consolation in all this is the colours. We managed to confirm that the E7Q PRO is a PFS-type television, meaning it has an additional filter that improves colour gamut coverage. As a result, even if the brightness does not deliver, the colours in HDR content can be appropriately saturated and pleasing to the eye, without the feeling of a "washed-out" image.

The best factory mode we relied on during testing turned out to be "Filmmaker". Although this mode is the closest to the creators' intent for films, it is not without certain imperfections. The white balance chart in both SDR and HDR clearly shows a dominance of red, resulting in significant yellowing, particularly noticeable in whites and on actors' faces. In HDR mode, there is also a slight dominance of green, which, however, does not have as much impact on the perception of the image. The gamma, which is responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest parts of the image, it was too low, causing excessive brightness in those scenes, depriving the film of drama and contrast. For HDR, the white balance remains at a similar level; however, the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to a strong brightness in the darkest scenes. Then the result suddenly drops below the reference line, resulting in an overly dark image and a loss of dynamics in the brighter parts.

In summary, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest parts of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which turned out to be the best built-in preset without a doubt. This mode, unlike the Eco, Standard or Dynamic settings, offers the most natural colours straight out of the box. Although no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendering in standard SDR content. The colour palette is very well tuned here, and the errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable televisions. The only drawback we noted in SDR is the tendency to darken some elements of the image, as indicated by the slightly raised gamma graph. The television performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a lack of blue in the white balance. This causes the colours on the screen to be too warm, and for some viewers, they may even seem “too cinematic.” Of course, to improve these parameters, we proceeded with professional calibration.

Even for its lower models, Samsung offers advanced image calibration tools, which allow for significant improvement of the factory settings. We undertook this task, and the results turned out to be more than satisfying. The white balance, which previously exhibited a strong yellowish tint in both SDR and HDR, was significantly improved. Although slight deviations from the norm can be noticed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to properly shape the gamma in SDR materials, which allows for achieving the maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, was also improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main reason lies in the limited brightness of the television, which does not allow for a complete representation of the dynamics of HDR content. Nevertheless, after calibration, the image is clearly better and more aligned with the creators' intentions. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

In the case of materials with a standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it is worth noting that the E7Q Pro unit we tested was exceptionally well-made at the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different intervention. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We managed to effectively tame the excessive warmth of the image, caused by a factory deficiency in blue colour. After calibration, the colour errors were reduced to a significantly lower level, which will certainly please those who watch a lot of streaming content in HDR format, expecting faithful reproduction.

The tonal smoothing function operates in two modes – "off" and "auto". Turning it off causes gradation issues, while the "auto" mode ensures smooth transitions, but at the cost of grain and detail, which are often blurred. Due to these limitations, we do not recommend using this feature, as confirmed by our tests conducted with it turned off.

Scaling of lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation makes the television perform better with higher resolution content.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well and does not dramatically fall behind much more expensive, advanced televisions. Lower-quality materials can look clean and sensible, without the impression that the image is artificially "enhanced." However, the smoothing function presents a bit worse. Indeed, it can be effective and improve tonal transitions in poor quality materials, but at the same time, it can introduce undesirable effects. It sometimes removes grain or adds unwanted artefacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic style of image.

Although the Samsung DU7192 is the lowest model in the manufacturer's range, it is equipped with motion smoothing technology. While the functionality of this solution is significantly limited compared to more expensive models, its presence alone distinguishes the television amidst competitors in this price bracket. The TV supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of films and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we can find, among other things, the "Judder Reduction" feature. Unfortunately, its performance leaves much to be desired – regardless of the setting, the picture exhibits the characteristic stutter known from materials recorded at 24 frames per second, making this feature practically ineffective.

In the category of smearing and motion fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has included a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as the menu offers more options for smoothing the image. Among other things, we have frame interpolation options, which allow us to adjust the fluidity for sports or films, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means there is no support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers a basic feature for gamers – automatic switching to low latency mode (ALLM), and support for basic HDR for games in the HGiG standard. HGiG allows for the display of HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for full enjoyment of the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustment of settings for games. The presence of this feature could significantly enhance user comfort, especially for those who frequently change display modes.

The E7Q PRO is a phenomenal screen for gamers. Aside from the typical "ache" of Hisense, which is the lack of support for the HGiG format due to permanently active tone mapping, we get practically everything one can expect from a television that is to have a gaming label. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rates, automatic switching to game mode, and support for 4K at 120 Hz. Additionally, all the most important settings are at hand in a clear Game Bar. This tool not only looks modern but also has a typically "gaming" edge and truly makes life easier while gaming.