PHILPS PUS9060 vs Dreame S100

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience for films from streaming platforms. Of course – it could always be better, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour palette offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (in reality, it’s PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 palette is certainly not a level to be proud of in 2025 – particularly in a television advertised as QLED.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

We tested the PUS9060 in the best factory mode available – of course, we are referring to the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was distinctly yellowish and shifted towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat “tanned” appearance. This led to significant colour errors, which in the worst cases exceeded a delta E value of 6 – thus they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the television slightly brightened the image, which was also evident in the comparative photo below.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

Thanks to calibration in film mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the perception of the entire scene. The image has become much more visually pleasing, although it is still far from reference settings. It may now appear slightly bluish, but it is still a definite improvement compared to the factory settings.

Unfortunately, we were not able to significantly improve the brightness characteristics, but this is already a matter of the television's design - the absence of local dimming limits the ability to precisely manage brightness. The PUS9060 simply cannot dynamically adjust luminance as more advanced models do. Nevertheless, after calibration, the overall experience is much more enjoyable, especially with film material.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

In the PUS9060, we find yet another version of the image processor called by Philips the P5 Perfect Picture, which is designed to improve the image – especially the imperfect one. The television features a distortion reduction function, which serves to smooth tonal transitions, i.e., those "colour joins" we mentioned earlier. This function does this very effectively – there is no noticeable harsh gradation of colours, but unfortunately, it works so aggressively that it sometimes dulls desired elements, such as the textures of materials or film grain. So one can consider this a certain compromise. We would rather not recommend using this function for films, but for more casual content – e.g., YouTube or standard television – it is perfectly fine.

The P5 processor also aims to improve the quality of lower-resolution images and does so quite effectively. The test image with the model is very soft – sometimes overly so – but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the television does not cut off edges in SD materials – which unfortunately still occurs in some TV models.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

PHILIPS PUS9060 is equipped with a 4K panel with a refresh rate of 144 Hz, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about films that are most often recorded at 24 frames? As with most of the televisions we tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight "jump" in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which limits blurring – and this is a very useful feature, especially when watching sports.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. There's VRR, there's ALLM, and on top of that, there's the implementation of HGiG, which helps to set HDR in games the way the developers intended. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're gaming on Xbox, PS5, or PC, everything works as it should. It also features a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low-latency mode.

And of course – Ambilight TV. Let’s be honest – without LED lights at the back, it’s not really a proper gaming setup. 😉 The multicoloured backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it just looks impressive.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.