Philips PUS8500 vs Sony BRAVIA 2 II (S25M2)

When it comes to the HDR effect on the PUS8560, it can fairly confidently be stated that it is very average. The panel brightness is around 350 nits, which we consider to be the absolute minimum for watching content in this format. However, this is not a result that will astonish a viewer searching for the best possible picture.

On the plus side, it is worth noting that the PUS8500 series – including the PUS8560/12 we tested – is advertised as a QLED television. And indeed, we can expect a wider colour spectrum here. This model is equipped with an additional filter (PFS), and a DCI-P3 colour coverage of around 90% should suffice for the majority of users. This filter works very similarly to quantum dots. As a result, the colours are quite well saturated. It is not an outstanding result, but it is entirely sufficient for watching films and series from streaming platforms.

The Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is clearly too low for the brightest parts of the image to look truly impressive. In practice, HDR here does not differ that much from standard SDR. Bright highlights, the sun or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with standard SDR content, and in that use its limited brightness will be least noticeable.

Colour gamut coverage

The Sony Bravia 2 II is also not impressive in terms of colour. The TV does not use any additional gamut‑expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements coverage of the DCI‑P3 gamut was about 78%, and the very wide BT.2020 roughly 57%. That's definitely too little to talk about truly saturated colours in HDR material. More intense reds, greens or turquoises will simply be less striking than on TVs with an expanded colour gamut. The Bravia 2 II therefore performs much better in the Rec.709 standard, the gamut used for films, series and television in SDR.

We tested the television with the best available factory settings, namely in Film/Filmmaker mode – this is the mode we recommend for everyday viewing. Unfortunately, it is not without its flaws. Both in HD and HDR content, the image had a noticeable tendency to a pink tint, caused by an excessive amount of red and blue in the white balance. Another issue turned out to be excessive brightness in the image, which was confirmed by both the gamma chart and the EOTF curve. This feature was responsible for loss of detail and washed-out colours in more challenging HDR scenes that we mentioned earlier. The overall result led to significant colour reproduction errors – in extreme cases, the delta E value exceeded 7, while the threshold for visible errors for the human eye is around 3. This situation can be improved with calibration, and you can read about its effects below.

The out-of-the-box colour reproduction in Cinema mode was actually quite good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colours shifted to slightly warmer, at times faintly pinkish, tones. However, this wasn’t a major fault and during normal viewing the picture still looked fairly natural. There was a bit more happening with image brightness. Looking at the gamma curve, you can see Sony doesn’t stick perfectly to the reference value. The darkest areas are slightly lifted, while as brightness increases the gamma gradually rises and a larger part of the picture becomes darker than it should. That said, it’s not such a large difference as to be very distracting in everyday viewing. Overall, SDR straight out of the box performs quite respectably.

The situation is considerably worse in HDR. We’ve already mentioned the limited colour gamut, but in addition the Bravia 2 II noticeably manipulates image brightness here. The EOTF curve sits below the reference value for a large part of its range, which means the TV renders most mid and brighter parts of a scene darker than the source material intends. Only towards the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks much brightness, but can also simply look too dark.

The Dutch manufacturer offers quite a sizable amount of settings in its products, so as usual, we decided to tinker with them a bit. The effects are immediately noticeable – we managed to correct the white balance, which made the image stop appearing excessively pink. The brightness characteristic has also been partially evened out, of course, within the limits set by the television itself. The image is no longer overly exaggerated, and the overall reception after calibration is definitely better than in the factory settings of the Filmmaker mode.

One could only critique the EOTF curve characteristic, which still indicates that the image has a tendency to brighten HDR materials. Despite our efforts, the darkest parts of scenes are still sometimes too bright, and the brightest ones do not always achieve their full contrast potential. However, it must be clearly stated that we are dealing with a typically budget construction – one cannot expect reference-level reproduction of HDR content from it.

Calibration has definitely helped this model – it improved the balance, toned down the aggressive colour palette, and brought the image closer to what one might expect from a well-configured movie mode. However, there are certain limitations that cannot be overcome.

Calibration did a lot for the Bravia 2 II, particularly with SDR content. Above all, we managed to even out the white balance and tidy up the gamma, which now follows the reference value much more closely. As a result, the image no longer has the previous pink cast, and the brightness across different areas is much better organised. You can also see this in the colour errors, which after calibration fell to a very low level (with slight issues in the most saturated reds). We also partially managed to rein in the Bravia 2 II in HDR, especially in the way the television handles image brightness. However, there is one thing no calibration can fix: the capabilities of the panel itself. A narrow colour gamut means the television is physically unable to reproduce the most saturated colours present in HDR material. On top of that, the low contrast of the IPS panel means darker scenes are veiled by a grey haze, which robs colours of some of their depth. So we can improve how the Bravia 2 II makes use of its capabilities, but unfortunately we cannot overcome the panel's inherent limitations.

Philips PUS8560 offers a function for reducing posterization, hidden under the name "distortion reduction". And although it indeed fulfills its role by smoothing out problematic tonal transitions, it works a bit too broadly. In practice, it affects not only colourful gradients but also softens faces, the textures of clothing, and the surfaces of furniture. This compromises the authenticity of the image – especially in films where natural texture is very important. However, if someone is looking for smoothing at all costs, it's best to set this option to "Low". For cinema image enthusiasts – we definitely do not recommend it.

On the positive side, the quality of upscaling older materials is noteworthy – the PUS8560 model handles them surprisingly well. The image retains its natural softness, without artificially boosted sharpness. It is also worth mentioning that the television correctly displays content with very low resolution, avoiding issues with image edge cutting (so-called overscan).

The upscaling on the Bravii 2 II is quite good and, in that respect, the TV matches the standard Sony has set. Lower-resolution content is sensibly upscaled to 4K, and the image is slightly smoothed in the process without excessive edge sharpening. The situation is worse when it comes to improving footage with visible compression artefacts. This is handled by the "Digital Noise Reduction" function, which at the "High" setting can indeed smooth out some unpleasant tonal banding. The problem is that it does this rather aggressively and, along with the imperfections, it also removes a lot of fine detail, including natural film grain. What is more, when there is more motion on screen its effectiveness drops sharply and any improvement is then minimal. For everyday use we therefore tended not to use this function.

The Philips PUS8560 is a television equipped with a panel featuring a refresh rate of 60 Hz, which immediately limits its capabilities in terms of displaying dynamic content. Watching sports or playing on a console is not particularly enjoyable. The situation is further worsened by the lack of any option to improve the smoothness of films. In the menu, we won't find settings that would allow us to enable a motion smoother or even a slight motion smoothing for films recorded at 24 frames per second. You can imagine the effect. The image can appear jerky, especially in shots with panoramic camera movements.

Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, bear in mind that it is a basic panel and its limitations are already clearly visible, especially during sports. The TV cannot interpolate 50/60 fps material to a higher refresh rate, so it cannot further improve the sharpness of fast-moving objects. For films and series, however, it offers a conventional motion smoothing feature that can reduce the characteristic judder of material shot at 24 fps.

Although the Philips PUS8560 is not designed with gamers in mind, the manufacturer has decided to equip it with a few features that may prove useful when connecting a console. On board, we find automatic switching to game mode (ALLM), as well as a simple connection status information bar – the so-called Game Bar. It does not make a particularly strong visual impression, but it serves its purpose. The presence of variable refresh rate (VRR), operating in the range of 48 to 60 Hz, may come as a surprise. While this is not a wide range, in the case of less demanding games or titles with unstable frame rates, VRR can help reduce screen tearing. However, this is the only element that could be considered beyond the minimum.

It must be made clear that the PUS8560 is not equipment for gamers looking for a responsive screen and full support for modern console features. It lacks HDMI 2.1 ports, the refresh rate is limited to 60 Hz, and the response time of the panel is not among the fastest. This model may be suitable at most for casual gamers who want to enjoy the Ambilight system.

The Bravia 2 II is not a television that lends itself well to gaming, and the list of features shows that quite quickly. You essentially only get the automatic low-latency mode ALLM and a simple Game Bar that lets you view basic signal information and change a few settings. But that is where the list of strengths ends. The TV does not support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It is suitable for occasional console gaming, and thanks to low input lag controls remain responsive, but if someone is looking for a TV primarily for games, the Bravia 2 II will simply be a rather limited choice.