Philips PUS8359 (VA) vs LG UT8100 (IPS)

Philips PUS8359 did not impress us with its results in HDR materials. This model is capable of generating a maximum brightness of 320 nits, and often even less. Such results, combined with a lack of support for HDR Dolby Vision, mean that the image will be significantly darker compared to the source material. Therefore, playing SDR materials will be more beneficial for this television. This is also suggested by the rather low coverage of the DCI-P3 colour gamut at 83%, which results in significant colour deficiencies. The fact remains that the television supports the HDR format based on dynamic metadata, although HDR10+ is such a niche format that it does not bring any significant advantages.

Unfortunately, the LG UT8100 television does not meet expectations in the HDR effect category. With a peak brightness of only 300 nits on the luminance chart, it is well below the required value to fully enjoy the HDR effects. In practice, the image resembles SDR quality more than true HDR, which is particularly evident in demanding high-contrast scenes. The coverage of the DCI-P3 colour palette is only 82%, further limiting the ability to present vibrant and rich colours. Instead of impressive visual experiences, we receive a muted and lacklustre image. For those looking for a television to fully utilise HDR content, the LG UT8100 model proves to be quite disappointing.

The best factory mode in terms of fidelity to the source material was "Film". This was the mode we used during our tests. Just like each of the factory modes in televisions, it had its shortcomings. We will check what exactly was wrong in both SDR and HDR materials. In both cases, the white balance showed excessive dominance of the green and red colour combination. This created a yellow tint that spread across the entire image, causing issues such as yellowed whites and problems with skin tones. This situation was perfectly illustrated on the "ColourChecker" palette, where each of the tested samples was pushed into its warmer counterparts. The foundation of the image is primarily contrast and black. These are represented by gamma charts and the EOTF curve. Looking at the first one, we can see a true rollercoaster, as we can observe both an elevated and a lowered gamma. The heavily elevated gamma caused visibility issues in blacks, while the lowered gamma led to a dramatic drop in contrast. In this context, the EOTF curve performed significantly better, only slightly brightening the image.

The Filmmaker Mode in LG UT8100, although theoretically the best for watching films, has significant flaws. The biggest problem is the white balance – drops in blue colour cause a noticeable yellowing of the image, evident in both HD and 4K content. These errors are confirmed by the measurement results in the Colour Checker test, which indicate significant deviations in colour reproduction.

Regarding brightness characteristics, both HD and 4K content feature a substantial tonal boost. The gamma curve in both cases remains significantly below the reference value of 2.4, leading to excessive brightening of darker elements of the image. A similar issue is noticeable in the EOTF curve – for 4K content, the television struggles with properly managing brightness, which results in problems with screen brightness. This means that the factory settings of this model require significant adjustments to achieve better image quality.

Philips offers a wide range of image calibration tools in both its more expensive and cheaper models. We utilised these tools and got to work, which was not as easy as many of you might think. While we were able to model the white balance, significantly improve the gamma, and refine the EOTF curve in both cases, the deltaE errors remained extremely high. There are several reasons for this situation, which are directly related to the low coverage of the DCI-P3 palette and the maximum brightness of the unit in HDR materials.

After calibrating the Filmmaker Mode, the gamma has been aligned to practically ideal, reference values, which has significantly improved the overall tonal characteristics of HD content. 4K HDR content also looks better, although certain issues are still visible at the extreme ends of the graph, where the curve deviates from perfection. The EOTF curve performs worse, as the television has difficulty maintaining appropriate brightness values. As a result, the image in some scenes may be overly bright or slightly dimmed, which is due to the very design of the device. Nevertheless, the calibration has brought considerable improvement, especially for HD content, where tonal balance and colour reproduction are now at a much higher level.

In this paragraph, we will take a look at two functionalities. We will once again examine the feature responsible for tonal transitions, but we will also check how the television performs with image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we have established, it quite effectively smooths out the inconsistencies. However, we must point out two things: we cannot enable it for HDR materials and that it blurs details in films.

The tested television cannot boast of the best image scaling. There is a noticeable overall blurriness of the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the character is also visible.

The fluidity of tonal transitions is also correct, although the effect depends on the settings. The update has improved the performance of the smooth gradation function, smoothing transitions better than before, but it has introduced minor issues with detail loss, e.g. on textures.

The image scaling on LG UT8100 performs very well. The image looks decent, without significant issues with edge aliasing. Details are preserved at a satisfactory level, which makes lower resolution materials look truly solid on this television. This allows users to enjoy watching older content without noticeable flaws in quality.

Philips PUS8359 will not be the best television for sports. The reason for this is the lack of implementation of even the basic motion smoothing feature, which was to be expected given the price of the device. We also note that we are dealing with a VA panel, whose sharpness is not of the highest standard. This type of panel is mainly associated with high contrast, which goes hand in hand with quite a slow response time, as clearly indicated by the matrix analysis results. As you can see from the images captured in rapid motion, the picture is typically blurred for this type of panel. Although it may not be the ideal option, it can be used conditionally for watching sports; however, one must keep in mind the less than optimal sharpness in motion. It is worth mentioning that films will exhibit judder, as the television does not have any motion smoother, even the simplest one.

LG UT8100, equipped with a 60 Hz panel, is particularly suited for those watching films. The television offers the TruMotion system with de-judder effect adjustment, allowing you to customise the smoothness of the image – from more choppy to exceptionally smooth, resembling a soap opera effect, depending on the user's preferences.

It will not be a surprise if we write that Philips PUS8359/12 only offers the most basic support for consoles. Once the console is connected, we can count on features such as: VRR and ALLM. This is quite pleasing in the case of the former, as experience has shown that even in more expensive units there can be issues with this. A nice touch is the implementation of a special GameBar that allows for changing settings on the "fly," so we won't have to exit the game and unnecessarily distract ourselves. This feature also allows for adapting gameplay to the needs of people with disabilities, which will certainly be extremely useful.

LG UT8100 offers basic features for gamers, such as ALLM and Game Bar, which makes access to settings easier. The television also supports HGiG, which improves image quality in HDR games. Unfortunately, the lack of support for Dolby Vision and VRR limits the capabilities of the device, as does the 60 Hz panel, which excludes support for 120 Hz resolution. This model is more suitable for less demanding gaming applications.