Philips PUS8359 (IPS) vs Philips PUS8209

The quality of the HDR effect on the Philips PUS8359/12 TV is also not impressive. The brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested test patterns. Additionally, the television does not excel in terms of colour gamut coverage – a mere 76% of DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

Unfortunately, this is where the problems begin. A maximum brightness of 280 nits is definitely too low to feel the true effect of HDR. In practice, the image resembles standard SDR more, so it’s hard to speak of deeper visual experiences. On the positive side, the colour gamut coverage is commendable – 91.4% DCI-P3 is a score that will be sufficient for most films. It must also be said that the image is stable and there are no issues with sudden changes in brightness or colours. Overall, HDR on this television is more of a formality than an actual added value. If we are looking for genuine HDR thrills, this model may not meet expectations.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film", which was used in our tests. Nevertheless, like other factory modes, it also had its flaws. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly noticeable in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every colour had shifted to warmer tones, affecting colour reproduction accuracy. A key aspect of the image is also contrast and brightness, which can be assessed by analysing gamma charts and the EOTF curve. On the gamma chart, we noticed significant deviations – both excessively high values, which caused loss of detail in the shadows, and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

Philips PUS8209 offers many picture modes, but the best of them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its clear problems. In the case of HD content, the white balance is characterised by a strong dominance of red, which causes the picture to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in the mid-tones, has serious issues at the beginning and end of the curve. Drops in the shadows cause a loss of detail in the dark areas, and blowouts in the bright areas make some elements look unnatural.

For high-quality 4K HDR content, the situation reverses. In this case, blue dominates, leading to an artificial enhancement effect, reminiscent of unnatural retail settings. Such an image looks unattractive and inconsistent with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference chart, causing the image to appear too dark, robbing the depth and detail of HDR content.

Against this backdrop, errors in the Color Checker test and deviations in colour palette reproduction are exceptionally large, which further negatively impacts the overall image quality. The Filmmaker mode, although the best among the available options, requires substantial corrections to fully convey the director's vision.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve, but despite these efforts, the deltaE errors were still at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final result. Although the overall presentation is much better, the design features of the television did not allow us to achieve spectacular results.

After calibration, the white balance for HD and 4K content has significantly improved. Although we have not achieved a perfectly flat characteristic, the effect is definitely better than before. The picture on the television no longer appears artificially warm or excessively cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted – the biggest issues at the beginning and end of the graph have been mitigated. The EOTF curve, responsible for brightness in 4K HDR material, has been stabilised, eliminating problems with excessive dimming of the image. In the colour palette test, some imperfections can still be noticed due to average coverage of the wide colour gamut, which is a limitation of the equipment itself. Nevertheless, the final effect is clearly better than before calibration – the image looks more natural and approaches the expectations of the Filmmaker mode.

In this paragraph, we will take a look at two functionalities. Once again, we will examine the feature responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we have established, it quite effectively smooths out irregularities. However, we must point out two things: we are unable to enable it for HDR materials, and that it blurs details in films.

The tested television cannot boast the best image scaling. The overall blurriness of the image is quite noticeable, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

The television offers a "Distortion Reduction" feature that effectively improves the gradation of tonal transitions, especially when set to the minimum level. Unfortunately, this comes at a cost – the feature simultaneously smooths out details such as the texture of materials. On the positive side, it is worth noting that the operation of this option does not negatively affect film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, one can sometimes notice issues with aliasing on certain elements, such as branches or fine details, which can lower the quality of reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

Philips PUS8359 is not the best choice for watching sport. The lack of even basic motion smoothing functionality means that the image during fast-moving scenes is not adequately clear. Despite the use of an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement regarding blurring. In pictures with fast movement, the figure of the alien is clearly blurry, indicating that the television struggles to maintain sharpness in dynamic shots.

The 60 Hz panel in the Philips PUS8209 is mainly suitable for watching films, but there is still a sense of something missing. The television does not offer any motion smoother that would allow users to adjust the fluidity of the picture to their individual preferences, which can be disappointing for some users.

In terms of compatibility with consoles, Philips PUS8359 is mainly suited for occasional gamers. Although the television is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the television to low latency mode, making quicker reactions easier during gameplay, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to the competition's solutions.

However, more demanding gamers may feel unsatisfied. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the television's capabilities in delivering smooth and detailed experiences during fast, dynamic gameplay.

The Philips PUS8209 offers basic features useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and a Game Bar that makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the television will not meet the expectations of more demanding gamers who are counting on higher smoothness and image precision. Additionally, this model does not support any HDR mode dedicated to gaming, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.