Philips PUS8359 (IPS) vs Haier Q80FUX

The quality of the HDR effect on the Philips PUS8359/12 TV is also not impressive. The brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested test patterns. Additionally, the television does not excel in terms of colour gamut coverage – a mere 76% of DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film", which was used in our tests. Nevertheless, like other factory modes, it also had its flaws. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly noticeable in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every colour had shifted to warmer tones, affecting colour reproduction accuracy. A key aspect of the image is also contrast and brightness, which can be assessed by analysing gamma charts and the EOTF curve. On the gamma chart, we noticed significant deviations – both excessively high values, which caused loss of detail in the shadows, and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve, but despite these efforts, the deltaE errors were still at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final result. Although the overall presentation is much better, the design features of the television did not allow us to achieve spectacular results.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

In this paragraph, we will take a look at two functionalities. Once again, we will examine the feature responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we have established, it quite effectively smooths out irregularities. However, we must point out two things: we are unable to enable it for HDR materials, and that it blurs details in films.

The tested television cannot boast the best image scaling. The overall blurriness of the image is quite noticeable, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

Philips PUS8359 is not the best choice for watching sport. The lack of even basic motion smoothing functionality means that the image during fast-moving scenes is not adequately clear. Despite the use of an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement regarding blurring. In pictures with fast movement, the figure of the alien is clearly blurry, indicating that the television struggles to maintain sharpness in dynamic shots.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

In terms of compatibility with consoles, Philips PUS8359 is mainly suited for occasional gamers. Although the television is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the television to low latency mode, making quicker reactions easier during gameplay, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to the competition's solutions.

However, more demanding gamers may feel unsatisfied. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the television's capabilities in delivering smooth and detailed experiences during fast, dynamic gameplay.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.