Philips PUS8209 vs Sony BRAVIA 7 II

Unfortunately, this is where the problems begin. A maximum brightness of 280 nits is definitely too low to feel the true effect of HDR. In practice, the image resembles standard SDR more, so it’s hard to speak of deeper visual experiences. On the positive side, the colour gamut coverage is commendable – 91.4% DCI-P3 is a score that will be sufficient for most films. It must also be said that the image is stable and there are no issues with sudden changes in brightness or colours. Overall, HDR on this television is more of a formality than an actual added value. If we are looking for genuine HDR thrills, this model may not meet expectations.

The Sony Bravia 7 II handles HDR very well and, above all, is simply a bright television. In the correct viewing mode, Professional, we measured around 2,000 nits of peak brightness, so the panel’s capabilities are truly significant. Of course, with Mini-LEDs a test pattern result is only part of the story, because a lot still depends on how the TV controls the backlight in real scenes. Here Sony’s algorithms perform very well. Depending on the scene, the brightness we measured in films ranged from roughly 1,100 to as much as 1,700 nits. That’s already a level at which HDR has proper punch and bright highlights can be genuinely impressive. It isn’t perfect in every situation, though. With small bright elements on a very dark background the Bravia 7 II clearly favours maintaining good blacks, which can cause their brightness to drop to around 500 nits. It still looks good, but you can see the TV does not always manage this without compromise.

Colours

The second thing that has a huge impact on HDR is, of course, colour. And this is precisely where True RGB technology was meant to bring one of the biggest changes. Looking at the panel’s capabilities alone, the Bravia 7 II performs very well. We measured about 98% DCI-P3 coverage and 88% BT.2020, so the potential to show strongly saturated colours is really large. In RGB TVs, however, the situation is a bit more complex. When we repeated the same measurements with a film background applied, palette coverage fell to around 92% DCI-P3 and 78% BT.2020. Those are still good figures, especially for an RGB Mini-LED TV, but they clearly show that the final result largely depends on how the algorithms control the three backlight colours. In most scenes the Bravia 7 II handles this well and colours retain high saturation. The biggest differences are visible in shades of blue, where samples begin to deviate more noticeably from reference values and coverage is weaker than for the other primary colours. True RGB therefore offers genuinely greater potential here, but, as with brightness, much depends on what is happening on screen.

Philips PUS8209 offers many picture modes, but the best of them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its clear problems. In the case of HD content, the white balance is characterised by a strong dominance of red, which causes the picture to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in the mid-tones, has serious issues at the beginning and end of the curve. Drops in the shadows cause a loss of detail in the dark areas, and blowouts in the bright areas make some elements look unnatural.

For high-quality 4K HDR content, the situation reverses. In this case, blue dominates, leading to an artificial enhancement effect, reminiscent of unnatural retail settings. Such an image looks unattractive and inconsistent with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference chart, causing the image to appear too dark, robbing the depth and detail of HDR content.

Against this backdrop, errors in the Color Checker test and deviations in colour palette reproduction are exceptionally large, which further negatively impacts the overall image quality. The Filmmaker mode, although the best among the available options, requires substantial corrections to fully convey the director's vision.

To evaluate the factory colours we chose the Professional mode, because it performs best among the available settings. However, it is not perfect. In SDR the white balance drifts slightly towards magenta, making some scenes look a little warmer and less neutral than they should. A bigger problem is the gamma, which sits closer to 2.5 than to 2.4. This makes the image a bit too dark in places, particularly in the midtones. In HDR the situation is better. As brightness increases a little too much red appears, but this is not an issue that is highly noticeable during viewing. Overall the Professional mode is a good starting point, although you can get a bit more out of it after calibration.

After calibration, the white balance for HD and 4K content has significantly improved. Although we have not achieved a perfectly flat characteristic, the effect is definitely better than before. The picture on the television no longer appears artificially warm or excessively cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted – the biggest issues at the beginning and end of the graph have been mitigated. The EOTF curve, responsible for brightness in 4K HDR material, has been stabilised, eliminating problems with excessive dimming of the image. In the colour palette test, some imperfections can still be noticed due to average coverage of the wide colour gamut, which is a limitation of the equipment itself. Nevertheless, the final effect is clearly better than before calibration – the image looks more natural and approaches the expectations of the Filmmaker mode.

After calibration the Bravia 7 II can look decidedly better. Above all, we managed to set the white balance very well, both in SDR and HDR. Gamma can also be improved, which after correction runs very close to the reference value. And in fact, for most users these changes will have the greatest impact on the picture. There is, however, a limitation when it comes to the colours themselves. In the Bravia 7 II Sony does not provide access to a classic CMS that would allow us to correct individual hues separately. A lot is therefore left in the hands of the algorithms controlling the True RGB backlight. If the TV misrepresents a particular colour, we are not always able to do anything about it. In our measurements this is most visible in certain reds and blues, where errors can still be quite large. This does not, however, undermine the point of calibration itself. Correctly setting the white point and gamma strongly affects the whole picture, so even without the ability to precisely correct every colour the difference compared with the factory settings is noticeable.

The television offers a "Distortion Reduction" feature that effectively improves the gradation of tonal transitions, especially when set to the minimum level. Unfortunately, this comes at a cost – the feature simultaneously smooths out details such as the texture of materials. On the positive side, it is worth noting that the operation of this option does not negatively affect film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, one can sometimes notice issues with aliasing on certain elements, such as branches or fine details, which can lower the quality of reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

Scaling and digital processing are among the strongest points of the Bravia 7 II and one of the bigger reasons to choose Sony over the competition. The manufacturer has been handling digital image processing well for years, and it shows here too. First and foremost, the 'Smooth Gradation' function works very well and can smooth out weak tonal transitions in lower-quality material. The safest setting is Low, but we would comfortably recommend Medium as well. The effect is stronger then, yet the TV still treats details very gently. Some fine details may be slightly smoothed, but Sony does this much more subtly than many other brands. The upscaling itself also performs very well. Lower-resolution material is well upscaled to 4K, the image looks clean and retains a lot of detail. Of course the TV will not magically turn native HD material into true 4K, but what can be extracted from such a source is handled really well by the Bravia 7 II.

The 60 Hz panel in the Philips PUS8209 is mainly suitable for watching films, but there is still a sense of something missing. The television does not offer any motion smoother that would allow users to adjust the fluidity of the picture to their individual preferences, which can be disappointing for some users.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion handling it delivers everything you would expect from a TV of this class. With sport or games at 120 fps, the picture is suitably smooth, and for films Sony provides an extensive motion interpolation system. You can therefore adjust the interpolation level separately and decide whether you want to preserve a more cinematic character to the motion or obtain noticeably smoother movement. The issue of motion blur itself is a little worse. The VA panel used is not among the fastest, and you can notice a slight trail behind moving objects, particularly on darker backgrounds. It is not at a level that greatly bothers during normal viewing, but last year’s Bravia 7 fared better in this respect and had a noticeably faster panel.

The Philips PUS8209 offers basic features useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and a Game Bar that makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the television will not meet the expectations of more demanding gamers who are counting on higher smoothness and image precision. Additionally, this model does not support any HDR mode dedicated to gaming, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.

Bravia 7 II has basically everything you’d expect today from a good console TV. It supports 4K at 120 Hz, VRR from 48 to 120 Hz and ALLM, so when you start a game the TV automatically switches to a low-latency mode. It also has properly working HGiG, which means that after configuring HDR on the console the TV won’t try to brighten the image further on its own. You just need to remember to turn off tone mapping in the TV’s menu. Dolby Vision in game mode is also a plus, especially useful for Xbox owners. Sony adds its own Game Menu. From it you can quickly check key signal information, verify VRR operation or change gaming-related settings without digging through the whole TV menu. The only thing missing from the feature list is support for 1440p at 120 Hz.

Our biggest reservation is not really about the functions themselves, but about the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 at 48 Gbps. One of those is also an eARC port. So if you connect a soundbar or AV receiver to the TV via HDMI, in practice you’re left with only one full HDMI 2.1 for a console or PC. With a single console that’s no problem, but with a PS5, an Xbox and an audio setup it starts to get tight. And this is hard to excuse for Sony. In cheaper TVs two HDMI 2.1 ports can still be acceptable, but in a model of this class, especially in 2026, we would expect a full set of four such ports.