Philips PUS8079 vs XIAOMI A PRO 2026

The maximum brightness in content with a wide tonal range at a level of 202 nits is extremely low and, in practice, does not allow for watching films and series on streaming platforms in the highest quality. It is worth mentioning that in this case, the use of the HDR format equipped with dynamic metadata will not help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It is also worth noting that PUS8079 utilises WLED backlighting, which unfortunately is not the best solution, resulting in a coverage of the wide DCI-P3 colour gamut of only 80%. The result of this situation is significantly less intense colours in HDR content.

If you are hoping for a cinema-grade HDR effect in the new Xiaomi A Pro 2026, you better cool your expectations quickly. This television is simply too dim to fully showcase the capabilities of contemporary films or series designed for the highest image quality. Our measurements showed brightness in the range of 200–300 nits, which is more akin to SDR content than ambitious HDR productions. In practice, this means that while most films may look fine, they certainly won't evoke that "wow" effect that other televisions are known for. Fortunately, not everything is lost – we must credit the PFS LED filter used here, which is a solution similar to the quantum dot technology found in QLEDs. Thanks to this, the coverage of the DCI-P3 colour palette reaches about 94%, resulting in vibrant, saturated colours in the vast majority of materials.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". Admittedly, it was the best among the pre-defined modes, although it had significant discrepancies between what the film's author wanted to convey and what the tested television displayed. Both in SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vivid mode, with the blue tint known from displays on shop shelves. Moving directly to SDR materials and what is responsible for contrast, namely gamma, we see that it is significantly reduced. This leads to cutting down on an already limited contrast range and brightening the entire image. In the EOTF curve, which is responsible for the increase in brightness pace in HDR materials, we observe a sharp drop below the reference line, which, given the limited light output of the television, had a significant impact on the perception of these contents, which were even darker. We will not separate the assessments of the colours themselves, as in both cases they achieved astronomical deltaE values, being simply completely different from what they should be.

What we saw in Filmmaker mode took us by surprise – and unfortunately not in a good way. The mode advertised as Hollywood standard resembled more of a shop window display. The white balance was shifted towards blue, leading to significant colour mistakes and burnt-out scenes in SDR content. It was slightly better, though still not perfect, in HDR materials. There were also issues there – the colour saturation and the entire palette consistently drifted towards cooler tones, resulting in an image that had more of an artificial, cold tint instead of a cinematic character. In other words: even in Filmmaker mode, which should showcase this television, we got an effect far from expectations.

Fortunately, Philips implements advanced image correction tools in all its televisions. SDR materials benefited the most here, and the enormous deltaE errors were significantly corrected, both white balance and gamma underwent considerable reshaping. Although one cannot speak of a reference image here, it is definitely better, and films or series can be watched without causing headaches, and above all, eye strain. Naturally, HDR materials, due to the very low luminance of the television, could not be corrected to the same extent as those with a standard colour palette; however, the EOTF curve and white balance were roughly straightened out. Unfortunately, that was all we managed to squeeze out of our unit, although it should be noted that each unit is different and has completely different errors, smaller or larger.

Although Xiaomi is not a brand associated with top-tier televisions, it must be acknowledged that even in a budget model like the A Pro 2026, the manufacturer left plenty of calibration settings. After a few adjustments, the SDR image gained a completely new look. Colours stopped drifting towards blue tones, whites took on a more natural quality, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was somewhat different with HDR materials. Here, it was immediately evident what we had already mentioned – clipping in bright scenes and issues with balance control. Calibration helped only partly, as the limitations of the panel itself played a role. However, it must be emphasized that for SDR, the television had transformed beyond recognition and in a decidedly positive direction.

We will return once more to the issue of tonal transitions but in the context of the overall improvement of image quality. As we can observe in the photograph on the left side, the enhancement function for gradation works brilliantly. Moreover, it offers several settings, and each of them, even the lowest one, provides beneficial effects, and what’s more, it does not soften the effect of film grain. We will reiterate that this function is the greatest advantage of the tested television.

Next, we will take a look at image scaling. Here, the tested television performed worse. We can primarily notice severely jagged fine details and a characteristic white halo around the figures. One must not forget about the considerable artificial sharpening of the image.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the strengths of this model. One might expect that since the television was not designed to achieve record brightness levels, the manufacturer would focus on a more robust processor and a set of features that would "enhance" lower-quality images. Unfortunately – and here we are also faced with significant disappointment. On the positive side, we can note reasonably good upscaling, which handles HD materials and boosts them up to 4K in an acceptable manner. However, this is where the list of advantages ends. The television does not offer any features that improve tonal transitions or smooth out digital imperfections, so in most cases, we get a raw image, exactly as we deliver from an external source. On a large screen, such a lack of support makes lower-quality materials simply look bland. An additional problem is the phenomenon of overscan. When watching older materials, it happens that part of the image gets cut off, which only amplifies the impression that Xiaomi still has a lot of ground to make up in this category.

This paragraph, unlike the others, will be extremely short. The reason for this state of affairs is the lack of implementation of even the most basic motion smoothing function, which was to be expected, considering the price of the device. We also note that we are dealing with a VA panel, which in itself will not have the best sharpness under the sun. This type of panel is primarily associated with high contrast, which goes hand in hand with quite slow response times, as we can clearly read from the matrix analysis results. As you can see, from the photos taken in quick motion, the image is typically blurred for this type of panel. Although it will not be the ideal option, it can conditionally be used for watching sports, keeping in mind the less than optimal sharpness in motion. It is worth mentioning that movies will be characterised by judder, as the television does not have any, even the simplest, motion smoother.

The fluidity of motion in the Xiaomi A Pro 2026 is an interesting compromise that arises from the hybrid matrix used here. At its native 4K resolution, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch films and series. It is precisely with them in mind that the manufacturer has added a motion smoother, allowing users to adjust the image to their own preferences – opting for greater fluidity or leaving more "cinematic" frames depending on the settings.

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and a Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic frequency changing, the picture is actually quite smooth for this price range and does not suffer from tearing.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for real-time editing of settings. This means we won't have to exit the game to make any changes to the picture. Importantly, it has not been stripped of options known from higher models. Thus, we will find features such as shadow enhancement for better visibility in dark areas and a colour filter for players with visual impairments.

Exactly – since Xiaomi has included the "Game Boost 120 Hz" feature, one might expect that they would follow up with a solid gaming package. Unfortunately, reality quickly dampens this enthusiasm. Aside from this mode (which, it must be admitted, is a great addition in a budget design), we only have a rather odd player panel. It's hard to call it a full-fledged "game bar" – it’s more of a simple overlay on the TV Menu with limited capabilities. And that would be about it. There’s a lack of ALLM, so the TV won’t automatically switch to game mode. There’s no VRR, so you can forget about smooth frame sync. We also won’t find support for Dolby Vision in games or the HGiG format, which are becoming increasingly standard on consoles. In short: besides the Game Boost 120 Hz, which actually allows for a more enjoyable experience at 1080p or 1440p, the Xiaomi A Pro 2026 offers nothing that could particularly attract gamers.