Philips PUS8079 vs PHILPS PUS9060

The maximum brightness in content with a wide tonal range at a level of 202 nits is extremely low and, in practice, does not allow for watching films and series on streaming platforms in the highest quality. It is worth mentioning that in this case, the use of the HDR format equipped with dynamic metadata will not help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It is also worth noting that PUS8079 utilises WLED backlighting, which unfortunately is not the best solution, resulting in a coverage of the wide DCI-P3 colour gamut of only 80%. The result of this situation is significantly less intense colours in HDR content.

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience for films from streaming platforms. Of course – it could always be better, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour palette offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (in reality, it’s PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 palette is certainly not a level to be proud of in 2025 – particularly in a television advertised as QLED.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". Admittedly, it was the best among the pre-defined modes, although it had significant discrepancies between what the film's author wanted to convey and what the tested television displayed. Both in SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vivid mode, with the blue tint known from displays on shop shelves. Moving directly to SDR materials and what is responsible for contrast, namely gamma, we see that it is significantly reduced. This leads to cutting down on an already limited contrast range and brightening the entire image. In the EOTF curve, which is responsible for the increase in brightness pace in HDR materials, we observe a sharp drop below the reference line, which, given the limited light output of the television, had a significant impact on the perception of these contents, which were even darker. We will not separate the assessments of the colours themselves, as in both cases they achieved astronomical deltaE values, being simply completely different from what they should be.

We tested the PUS9060 in the best factory mode available – of course, we are referring to the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was distinctly yellowish and shifted towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat “tanned” appearance. This led to significant colour errors, which in the worst cases exceeded a delta E value of 6 – thus they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the television slightly brightened the image, which was also evident in the comparative photo below.

Fortunately, Philips implements advanced image correction tools in all its televisions. SDR materials benefited the most here, and the enormous deltaE errors were significantly corrected, both white balance and gamma underwent considerable reshaping. Although one cannot speak of a reference image here, it is definitely better, and films or series can be watched without causing headaches, and above all, eye strain. Naturally, HDR materials, due to the very low luminance of the television, could not be corrected to the same extent as those with a standard colour palette; however, the EOTF curve and white balance were roughly straightened out. Unfortunately, that was all we managed to squeeze out of our unit, although it should be noted that each unit is different and has completely different errors, smaller or larger.

Thanks to calibration in film mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the perception of the entire scene. The image has become much more visually pleasing, although it is still far from reference settings. It may now appear slightly bluish, but it is still a definite improvement compared to the factory settings.

Unfortunately, we were not able to significantly improve the brightness characteristics, but this is already a matter of the television's design - the absence of local dimming limits the ability to precisely manage brightness. The PUS9060 simply cannot dynamically adjust luminance as more advanced models do. Nevertheless, after calibration, the overall experience is much more enjoyable, especially with film material.

We will return once more to the issue of tonal transitions but in the context of the overall improvement of image quality. As we can observe in the photograph on the left side, the enhancement function for gradation works brilliantly. Moreover, it offers several settings, and each of them, even the lowest one, provides beneficial effects, and what’s more, it does not soften the effect of film grain. We will reiterate that this function is the greatest advantage of the tested television.

Next, we will take a look at image scaling. Here, the tested television performed worse. We can primarily notice severely jagged fine details and a characteristic white halo around the figures. One must not forget about the considerable artificial sharpening of the image.

In the PUS9060, we find yet another version of the image processor called by Philips the P5 Perfect Picture, which is designed to improve the image – especially the imperfect one. The television features a distortion reduction function, which serves to smooth tonal transitions, i.e., those "colour joins" we mentioned earlier. This function does this very effectively – there is no noticeable harsh gradation of colours, but unfortunately, it works so aggressively that it sometimes dulls desired elements, such as the textures of materials or film grain. So one can consider this a certain compromise. We would rather not recommend using this function for films, but for more casual content – e.g., YouTube or standard television – it is perfectly fine.

The P5 processor also aims to improve the quality of lower-resolution images and does so quite effectively. The test image with the model is very soft – sometimes overly so – but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the television does not cut off edges in SD materials – which unfortunately still occurs in some TV models.

This paragraph, unlike the others, will be extremely short. The reason for this state of affairs is the lack of implementation of even the most basic motion smoothing function, which was to be expected, considering the price of the device. We also note that we are dealing with a VA panel, which in itself will not have the best sharpness under the sun. This type of panel is primarily associated with high contrast, which goes hand in hand with quite slow response times, as we can clearly read from the matrix analysis results. As you can see, from the photos taken in quick motion, the image is typically blurred for this type of panel. Although it will not be the ideal option, it can conditionally be used for watching sports, keeping in mind the less than optimal sharpness in motion. It is worth mentioning that movies will be characterised by judder, as the television does not have any, even the simplest, motion smoother.

PHILIPS PUS9060 is equipped with a 4K panel with a refresh rate of 144 Hz, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about films that are most often recorded at 24 frames? As with most of the televisions we tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight "jump" in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which limits blurring – and this is a very useful feature, especially when watching sports.

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and a Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic frequency changing, the picture is actually quite smooth for this price range and does not suffer from tearing.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for real-time editing of settings. This means we won't have to exit the game to make any changes to the picture. Importantly, it has not been stripped of options known from higher models. Thus, we will find features such as shadow enhancement for better visibility in dark areas and a colour filter for players with visual impairments.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. There's VRR, there's ALLM, and on top of that, there's the implementation of HGiG, which helps to set HDR in games the way the developers intended. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're gaming on Xbox, PS5, or PC, everything works as it should. It also features a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low-latency mode.

And of course – Ambilight TV. Let’s be honest – without LED lights at the back, it’s not really a proper gaming setup. 😉 The multicoloured backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it just looks impressive.