Philips PUS8079 vs Philips PUS8359 (IPS)

The maximum brightness in content with a wide tonal range at a level of 202 nits is extremely low and, in practice, does not allow for watching films and series on streaming platforms in the highest quality. It is worth mentioning that in this case, the use of the HDR format equipped with dynamic metadata will not help either. Why won't it help? Because the only such format implemented in the television is HDR10+, which is extremely unpopular, and films recorded in this format are scarce. It is also worth noting that PUS8079 utilises WLED backlighting, which unfortunately is not the best solution, resulting in a coverage of the wide DCI-P3 colour gamut of only 80%. The result of this situation is significantly less intense colours in HDR content.

The quality of the HDR effect on the Philips PUS8359/12 TV is also not impressive. The brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested test patterns. Additionally, the television does not excel in terms of colour gamut coverage – a mere 76% of DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

The best factory mode in terms of colour reproduction and fidelity to the director's vision was "Film". Admittedly, it was the best among the pre-defined modes, although it had significant discrepancies between what the film's author wanted to convey and what the tested television displayed. Both in SDR and HDR materials (though to a lesser extent in the latter), the white balance, which is the most fundamental element responsible for image purity, turned out to be somewhat of a repeat of the vivid mode, with the blue tint known from displays on shop shelves. Moving directly to SDR materials and what is responsible for contrast, namely gamma, we see that it is significantly reduced. This leads to cutting down on an already limited contrast range and brightening the entire image. In the EOTF curve, which is responsible for the increase in brightness pace in HDR materials, we observe a sharp drop below the reference line, which, given the limited light output of the television, had a significant impact on the perception of these contents, which were even darker. We will not separate the assessments of the colours themselves, as in both cases they achieved astronomical deltaE values, being simply completely different from what they should be.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film", which was used in our tests. Nevertheless, like other factory modes, it also had its flaws. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly noticeable in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every colour had shifted to warmer tones, affecting colour reproduction accuracy. A key aspect of the image is also contrast and brightness, which can be assessed by analysing gamma charts and the EOTF curve. On the gamma chart, we noticed significant deviations – both excessively high values, which caused loss of detail in the shadows, and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

Fortunately, Philips implements advanced image correction tools in all its televisions. SDR materials benefited the most here, and the enormous deltaE errors were significantly corrected, both white balance and gamma underwent considerable reshaping. Although one cannot speak of a reference image here, it is definitely better, and films or series can be watched without causing headaches, and above all, eye strain. Naturally, HDR materials, due to the very low luminance of the television, could not be corrected to the same extent as those with a standard colour palette; however, the EOTF curve and white balance were roughly straightened out. Unfortunately, that was all we managed to squeeze out of our unit, although it should be noted that each unit is different and has completely different errors, smaller or larger.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve, but despite these efforts, the deltaE errors were still at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final result. Although the overall presentation is much better, the design features of the television did not allow us to achieve spectacular results.

We will return once more to the issue of tonal transitions but in the context of the overall improvement of image quality. As we can observe in the photograph on the left side, the enhancement function for gradation works brilliantly. Moreover, it offers several settings, and each of them, even the lowest one, provides beneficial effects, and what’s more, it does not soften the effect of film grain. We will reiterate that this function is the greatest advantage of the tested television.

Next, we will take a look at image scaling. Here, the tested television performed worse. We can primarily notice severely jagged fine details and a characteristic white halo around the figures. One must not forget about the considerable artificial sharpening of the image.

In this paragraph, we will take a look at two functionalities. Once again, we will examine the feature responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we have established, it quite effectively smooths out irregularities. However, we must point out two things: we are unable to enable it for HDR materials, and that it blurs details in films.

The tested television cannot boast the best image scaling. The overall blurriness of the image is quite noticeable, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

This paragraph, unlike the others, will be extremely short. The reason for this state of affairs is the lack of implementation of even the most basic motion smoothing function, which was to be expected, considering the price of the device. We also note that we are dealing with a VA panel, which in itself will not have the best sharpness under the sun. This type of panel is primarily associated with high contrast, which goes hand in hand with quite slow response times, as we can clearly read from the matrix analysis results. As you can see, from the photos taken in quick motion, the image is typically blurred for this type of panel. Although it will not be the ideal option, it can conditionally be used for watching sports, keeping in mind the less than optimal sharpness in motion. It is worth mentioning that movies will be characterised by judder, as the television does not have any, even the simplest, motion smoother.

Philips PUS8359 is not the best choice for watching sport. The lack of even basic motion smoothing functionality means that the image during fast-moving scenes is not adequately clear. Despite the use of an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement regarding blurring. In pictures with fast movement, the figure of the alien is clearly blurry, indicating that the television struggles to maintain sharpness in dynamic shots.

Philips PUS8079 offers only the most basic support for gaming in the form of ALLM, VRR, and a Game Bar. The most important information is that thanks to the implementation of the feature responsible for dynamic frequency changing, the picture is actually quite smooth for this price range and does not suffer from tearing.

A slightly greater nod towards gamers is the introduction of the Game Bar, allowing for real-time editing of settings. This means we won't have to exit the game to make any changes to the picture. Importantly, it has not been stripped of options known from higher models. Thus, we will find features such as shadow enhancement for better visibility in dark areas and a colour filter for players with visual impairments.

In terms of compatibility with consoles, Philips PUS8359 is mainly suited for occasional gamers. Although the television is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the television to low latency mode, making quicker reactions easier during gameplay, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to the competition's solutions.

However, more demanding gamers may feel unsatisfied. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the television's capabilities in delivering smooth and detailed experiences during fast, dynamic gameplay.