Philips PUS7009 (VA) vs SONY BRAVIA 3 II (XR35M2)

In terms of HDR effect quality, Philips PUS7009 performs very poorly. A brightness level of 250 nits does not allow one to enjoy HDR effects, and the image resembles more of a standard SDR. There is no question of dynamic effects or vivid light bursts. The coverage of the DCI-P3 colour gamut is only 75%, which is definitely insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model could be praised in the context of HDR.

Bravia 3 II is certainly not a TV that tries to impress with brightness. In our measurements it reached about 450 nits, so it falls well short of the brightest models on the market. That does not mean HDR is just a paper feature. Compared with ordinary SDR material, the brightest elements of the image can already come through noticeably, and reflections, highlights and stronger exposures have a bit more energy and stand out better from the rest of the scene. This is most obvious in simpler shots where the screen displays many bright elements. Then the Bravia 3 II can give a hint of a higher dynamic-range picture. The problem only begins with more demanding content, where much greater brightness headroom is required. There the TV quickly shows its limitations and instead of powerful, striking HDR we get only a competently rendered picture.

Colours

Bravia 3 II uses a QLED-type panel, although technically it does not use a classic quantum dot layer. Instead Sony has used a solution based on PFS phosphor, which performs a very similar role: it allows more saturated reds and greens and thus enables a much wider colour gamut. In measurements DCI-P3 coverage was around 94%, and the very wide BT.2020 around 74.4%. These are good results for this class of hardware, which mean the Bravia 3 II has no problem reproducing sufficiently saturated colours in HDR content. Colours do not look washed out, and more intense hues can look genuinely attractive.

The television was tested in movie mode, which – despite its name – does not provide accurate image display. The white balance in both 4K HDR and HD/SDR content shows drops in red, causing the image to appear cooler and the colours to lose their natural warmth. The gamma brightness characteristics and the EOTF curve confirm that the television struggles to maintain appropriate brightness – it boosts it significantly, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where everything looks as if it has a milky filter applied. Additionally, the limited coverage of a wide colour palette also does not favour quality – color checker tests indicate significant colour variations, making it difficult to achieve faithful image reproduction.

In Professional mode the Bravia 3 II already delivers a fairly good level of colour reproduction straight out of the box. In SDR the most noticeable issue is a slightly low gamma, which makes the midtones a little brighter. White balance isn't perfect either; as brightness increases the blue and red components become slightly lacking, so whites can at times take on a marginally warmer, faintly greenish tint. These are not faults that immediately catch the eye when watching a film. Average error values hover around 3, so the factory setting can be regarded as quite good. The situation is similar in HDR. Here too there is a slight lack of the blue component, so the image is marginally warmer than the reference, but the difference is not large enough to significantly interfere with normal viewing.

After calibration, the image improved significantly, especially in terms of white balance, which is now more stable, and the hues have become more natural, eliminating the previous impression of an overly cool image. The calibration brought noticeable benefits in terms of tonality – the shadows and midtones are now more realistic, and the overall effect appears more harmonious. Unfortunately, hardware limitations still affect image quality. The brightness characteristics remain problematic, despite our efforts, and due to poor coverage of the DCI-P3 and BT.2020 colour spaces, delta E errors are still at a high level. Although the calibration improved some aspects, the television still does not allow for complete satisfaction.

After calibration, there is particularly a lot to be gained from SDR content. The white balance was set almost perfectly, the gamma practically matches the reference value, and the average colour errors fell from around 3 to about 1. That is already a level at which differences from the reference image are, in practice, very difficult to detect. The Bravia 3 II therefore shows that, despite its position in Sony’s lineup, it has quite a lot of potential for precise picture calibration. Improvements are also visible in HDR, although here it is no longer possible to avoid all the limitations of the TV itself. After evening out the colours, it is easier to notice that the EOTF curve in film content runs slightly below the reference value in places, so the Bravia 3 II gently darkens part of the image. This is not an ideal solution from a reference point of view, but in this particular TV it also has its benefits. With no local dimming and average black levels, this behaviour slightly reduces the visibility of the backlight in darker scenes and helps maintain a stronger impression of contrast. So you could say Sony partly masks the limitations of the panel this way, instead of trying at all costs to stick to the reference luminance.

When it comes to tonal transitions in low-quality material, the function called "Distortion Reduction" (the "minimum" setting) effectively improves gradation, eliminating unattractive tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur grain or good quality material, it can introduce undesirable effects and blur elements that should remain sharp when the signal is poorer.

In terms of image scaling, Philips PUS7009 performs decently. A significant advantage is the absence of cropped image edges, meaning no overscan, which allows for the display of the full frame without loss. The image is noticeably enhanced, making characters and backgrounds, such as the model or branches in the background, look quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desired details in the distance, the effects are good enough for most users to be satisfied.

The Bravia 3 II is Sony's first TV to use the new MediaTek Pentonic 800 chipset, and there are a few changes in image processing. Starting with the basics. The upscaling itself is adequate. The TV can sensibly pull up lower-resolution material and does not have a strong tendency to over-emphasise jagged edges or other source imperfections. With regular broadcast TV or weaker streaming material the picture therefore remains quite pleasing. We have more reservations about the digital image processing. In this model Sony has replaced the well-known "Smooth Gradation" function with a new setting called "Digital Noise Reduction". Its role is essentially very similar: it is supposed to smooth unpleasant tonal transitions and artefacts resulting from heavy signal compression. Unfortunately, this function performs noticeably worse than before. At the "High" setting (the only one that had any visible effect) the TV can smooth away too many elements of the image at once, causing film grain to disappear and the texture of objects or even skin to start looking unnatural. Worse still, the effect is not particularly stable. When a scene contains more motion, the function's effect clearly weakens and at times it looks as if the TV stops intervening in the picture altogether. For everyday viewing we therefore would not recommend using it at a high level. It can help on a static shot, but the price is often an excessive loss of detail.

Philips PUS7009 does not have motion smoothing capabilities, which means there is no option to adjust the image for a more choppy or smoother, cinematic effect. Such features could positively influence the reception of dynamic scenes. In terms of motion blur, this model is equipped with a 60 Hz VA panel, which offers slightly worse results than the variant with an IPS panel. The VA panel introduces minimally greater motion blur, although the differences are not significant and should not pose a problem for most viewers.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120Hz VA panel, a solution that, by nature, despite the high refresh rate, does not always cope well with motion blur. Here, however, Sony has managed to keep that problem very well under control. Fast-moving objects remain crisp, and the characteristic trails and blurring are reduced to a very low level, if not to zero. It is one of the least motion-blur-prone LCD TVs we have tested. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive True RGB flagship series, the Bravia 9 II.

In terms of compatibility with consoles, Philips PUS7009 is likely to satisfy casual gamers. Although equipped with HDMI 2.0, it offers features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the television to low latency mode, which speeds up responses during gaming, while VRR adjusts the refresh rate to minimise screen tearing. Game Bar provides quick access to gaming settings and monitors key parameters, although it visually falls short compared to competing solutions. However, more demanding gamers may feel underwhelmed. Philips PUS7009 does not support advanced HDR formats in games, and the 60 Hz panel limits the ability to display smooth and detailed images in dynamic scenes, which may not satisfy fans of fast-paced action games.

Sony Bravia 3 II is a very good TV for gamers, although not everything has been implemented exactly as we would like. The biggest change concerns the connectors. For the first time in a Sony TV we get as many as four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the issues that has plagued this manufacturer’s TVs for years. We can connect several devices at once and on each input use the device’s full capabilities, for example VRR or ALLM. There is also a simple Game Bar that lets you view key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game. However, there are two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. That will not be a problem for everyone, but people using that resolution on a console or PC, for example to get higher frame rates in certain games, will have to choose 1080p. We have more reservations about HGiG support. Sony does not allow you to disable the TV’s tone mapping on the Bravia 3 II, so the screen is always processing HDR content even when you would prefer to leave that task to the console. This is most obvious during HDR setup — the checkerboard pattern does not disappear at the point that corresponds to the TV’s actual capabilities. That does not mean HDR in games will look bad. You just need to approach the setup a little differently and, instead of relying on the pattern, manually set the peak brightness to around 450 nits. The issue can be worked around, but you should know about it before you start setting up the console.