Philips PUS7009 (VA) vs PHILPS PUS9060

In terms of HDR effect quality, Philips PUS7009 performs very poorly. A brightness level of 250 nits does not allow one to enjoy HDR effects, and the image resembles more of a standard SDR. There is no question of dynamic effects or vivid light bursts. The coverage of the DCI-P3 colour gamut is only 75%, which is definitely insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model could be praised in the context of HDR.

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience for films from streaming platforms. Of course – it could always be better, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour palette offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (in reality, it’s PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 palette is certainly not a level to be proud of in 2025 – particularly in a television advertised as QLED.

The television was tested in movie mode, which – despite its name – does not provide accurate image display. The white balance in both 4K HDR and HD/SDR content shows drops in red, causing the image to appear cooler and the colours to lose their natural warmth. The gamma brightness characteristics and the EOTF curve confirm that the television struggles to maintain appropriate brightness – it boosts it significantly, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where everything looks as if it has a milky filter applied. Additionally, the limited coverage of a wide colour palette also does not favour quality – color checker tests indicate significant colour variations, making it difficult to achieve faithful image reproduction.

We tested the PUS9060 in the best factory mode available – of course, we are referring to the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was distinctly yellowish and shifted towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat “tanned” appearance. This led to significant colour errors, which in the worst cases exceeded a delta E value of 6 – thus they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the television slightly brightened the image, which was also evident in the comparative photo below.

After calibration, the image improved significantly, especially in terms of white balance, which is now more stable, and the hues have become more natural, eliminating the previous impression of an overly cool image. The calibration brought noticeable benefits in terms of tonality – the shadows and midtones are now more realistic, and the overall effect appears more harmonious. Unfortunately, hardware limitations still affect image quality. The brightness characteristics remain problematic, despite our efforts, and due to poor coverage of the DCI-P3 and BT.2020 colour spaces, delta E errors are still at a high level. Although the calibration improved some aspects, the television still does not allow for complete satisfaction.

Thanks to calibration in film mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the perception of the entire scene. The image has become much more visually pleasing, although it is still far from reference settings. It may now appear slightly bluish, but it is still a definite improvement compared to the factory settings.

Unfortunately, we were not able to significantly improve the brightness characteristics, but this is already a matter of the television's design - the absence of local dimming limits the ability to precisely manage brightness. The PUS9060 simply cannot dynamically adjust luminance as more advanced models do. Nevertheless, after calibration, the overall experience is much more enjoyable, especially with film material.

When it comes to tonal transitions in low-quality material, the function called "Distortion Reduction" (the "minimum" setting) effectively improves gradation, eliminating unattractive tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur grain or good quality material, it can introduce undesirable effects and blur elements that should remain sharp when the signal is poorer.

In terms of image scaling, Philips PUS7009 performs decently. A significant advantage is the absence of cropped image edges, meaning no overscan, which allows for the display of the full frame without loss. The image is noticeably enhanced, making characters and backgrounds, such as the model or branches in the background, look quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desired details in the distance, the effects are good enough for most users to be satisfied.

In the PUS9060, we find yet another version of the image processor called by Philips the P5 Perfect Picture, which is designed to improve the image – especially the imperfect one. The television features a distortion reduction function, which serves to smooth tonal transitions, i.e., those "colour joins" we mentioned earlier. This function does this very effectively – there is no noticeable harsh gradation of colours, but unfortunately, it works so aggressively that it sometimes dulls desired elements, such as the textures of materials or film grain. So one can consider this a certain compromise. We would rather not recommend using this function for films, but for more casual content – e.g., YouTube or standard television – it is perfectly fine.

The P5 processor also aims to improve the quality of lower-resolution images and does so quite effectively. The test image with the model is very soft – sometimes overly so – but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the television does not cut off edges in SD materials – which unfortunately still occurs in some TV models.

Philips PUS7009 does not have motion smoothing capabilities, which means there is no option to adjust the image for a more choppy or smoother, cinematic effect. Such features could positively influence the reception of dynamic scenes. In terms of motion blur, this model is equipped with a 60 Hz VA panel, which offers slightly worse results than the variant with an IPS panel. The VA panel introduces minimally greater motion blur, although the differences are not significant and should not pose a problem for most viewers.

PHILIPS PUS9060 is equipped with a 4K panel with a refresh rate of 144 Hz, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about films that are most often recorded at 24 frames? As with most of the televisions we tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight "jump" in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which limits blurring – and this is a very useful feature, especially when watching sports.

In terms of compatibility with consoles, Philips PUS7009 is likely to satisfy casual gamers. Although equipped with HDMI 2.0, it offers features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the television to low latency mode, which speeds up responses during gaming, while VRR adjusts the refresh rate to minimise screen tearing. Game Bar provides quick access to gaming settings and monitors key parameters, although it visually falls short compared to competing solutions. However, more demanding gamers may feel underwhelmed. Philips PUS7009 does not support advanced HDR formats in games, and the 60 Hz panel limits the ability to display smooth and detailed images in dynamic scenes, which may not satisfy fans of fast-paced action games.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. There's VRR, there's ALLM, and on top of that, there's the implementation of HGiG, which helps to set HDR in games the way the developers intended. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're gaming on Xbox, PS5, or PC, everything works as it should. It also features a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low-latency mode.

And of course – Ambilight TV. Let’s be honest – without LED lights at the back, it’s not really a proper gaming setup. 😉 The multicoloured backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it just looks impressive.