Philips PUS7009 (IPS) vs TCL V6C

In terms of HDR effect quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits does not allow for enjoyment of HDR effects, and the image resembles a more standard SDR. There is no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is decidedly insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model could be praised in the context of HDR.

When it comes to HDR, the TCK V6C clearly shows that this is not its strong suit. A peak brightness of around 200 nits makes it difficult to speak of true HDR effects – the image simply remains too dark to extract details in bright scenes or convey the appropriate dynamics. Although the television formally supports many HDR formats, in practice it is not equipped for such demanding content. The lack of additional coatings that enhance colours, such as QLED or PFS LED, further limits the attractiveness of the image – in more spectacular productions, colours can appear washed out compared to more expensive models. Therefore, the V6C will primarily serve as a television for everyday viewing, YouTube or SDR content, rather than as equipment for cinematic experiences in high quality.

The television was tested in film mode, which – despite its name – does not provide accurate image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, causing the image to appear cooler and the colours to lose their natural warmth. The gamma brightness characteristics and the EOTF curve confirm that the television has issues maintaining appropriate brightness – it heavily boosts it, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where the entire image appears as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not favour quality – colour checker tests indicate significant colour variations, making it difficult to achieve faithful image reproduction.

We started our colour reproduction tests with the Filmmaker mode, which in theory should be the best choice straight out of the box. It certainly performs better than the Eco or Dynamic modes, which significantly alter the image and spoil its natural character. As you can see from the graphs, the factory calibration of the V6C is not ideal, although it's not a complete disaster either. The biggest issue turned out to be a deficiency in red – the television clearly "cools" the image, which is particularly noticeable on human faces, giving a "corpse skin" effect. This issue was the most bothersome in everyday viewing. Looking at the colour palette in HDR content, the shortcomings in red are also noticeable, and their source is the relatively narrow coverage of the colour space. Of course, every television can be calibrated, so we decided to check how the V6C would perform after such an adjustment.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the previous impression of a picture that was too cool. Calibration has brought noticeable benefits in terms of tonality – shadows and midtones are now more realistic, and the overall effect seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristics remain problematic, despite our efforts, and due to the poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

My dear friends – we haven’t had such a difficult "calibration battle" in years. The V6C turned out to be one of the most stubborn televisions we have encountered in the editorial office. The calibration attempts alone took us several man-hours and required considerable patience. We finally managed to slightly warm the skin tones, which made faces stop looking like they were pulled straight from a horror film, a complaint regarding the factory settings. Unfortunately, that's not the end of it – the television reacted to our white balance corrections in a completely unpredictable manner. Where we expected stabilisation of the image in a certain area, new errors appeared, and the Color Checker measurements showed deviations that could not be rationally explained. It is hard to determine whether the issue lay with the software or the design itself, but one thing is certain – the V6C put up exceptionally strong resistance. Ultimately, the calibration brought improvement, especially in SDR content, where the image became more pleasant and natural. However, it must be clearly stated that the design limitations remain. The television still flattens the image in HDR materials and has noticeable deficiencies in colour reproduction. This device is rather intended for everyday television watching or SDR materials than for cinematic viewing in the highest quality.

When it comes to tonal transitions in low-quality material, a feature named "Distortion Reduction" (set to "minimum") effectively improves gradation, eliminating ugly tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur the grain or good-quality material, it can introduce undesirable effects and blur elements that should remain sharp when the signal is poorer.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped image edges, meaning no overscan, which allows for the display of the full frame without loss. The image is noticeably enhanced, making characters and backgrounds, such as the model or branches in the background, appear quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desirable details in the distance, the results are good enough to satisfy most users.

When it comes to upscaling, the V6C does not bring anything groundbreaking to the table. Lower quality content is heavily sharpened, making the image look very unnatural, at times even artificial. This can be somewhat mitigated by lowering the sharpness level in the settings, but the effect is not spectacular. The image still remains far from ideal. The digital processing itself performs better. The function responsible for smoothing tonal transitions works quite effectively, especially at the medium setting, where the image does indeed appear smoother. Unfortunately, its operation is rather aggressive – it heavily interferes with the overall scene, causing the actors in the foreground to start looking like characters from super smooth soap operas. Therefore, we would rather not recommend using this option if a natural viewing experience is important to us.

Philips PUS7009 does not have any motion smoothing features for films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the comfort of watching dynamic scenes.

Motion smoothing and fluidity are areas where the V6C quickly reveals its limitations. It's a 60 Hz television, so it was difficult to expect miracles here. During dynamic sports scenes, the image is rather average. This is most noticeable in darker scenes, where clear trails and blurred "glows" follow moving objects, which can be quite distracting. This is definitely a weaker point of this design. Fortunately, there is also a small plus. The V6C is equipped with a motion smoother that works while watching films. Thanks to it, productions recorded at 24 frames per second, which includes practically all cinematic titles and series, can look smoother than they were actually recorded. Importantly, the intensity of the effect can be adjusted to personal preferences – from a slight smoothing to a full "soap opera effect".

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite the use of HDMI 2.0, the television offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the television to low latency mode, allowing for quicker response times during gameplay, while VRR dynamically adjusts the refresh rate to reduce the tearing effect. Game Bar is a tool that provides quick access to game settings and real-time monitoring of parameters - although we believe it appears the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the television's ability to deliver smooth and fully detailed experiences during dynamic gameplay.

Although the V6C is not a television designed with avid gamers in mind, TCL has added a few features that might appeal to more casual users. It does not have a 120 Hz panel or HDMI 2.1 ports, but there is an ALLM mode that automatically switches the television to low-latency mode. Additionally, there is quite a practical Game Bar – a simple panel for previewing basic parameters, changing picture modes, or even activating a virtual crosshair on the screen. An interesting feature is the support for Dolby Vision Gaming, intended for Xbox Series S/X consoles – a nice addition, although in practice it does not offer as much as in more expensive models. However, the biggest issue remains the configuration of HDR. The HGiG function, responsible for adjusting the brightness and contrast of games to the capabilities of the panel, does not respond as we would expect – the image can be excessively dark or too flat. As a result, the better solution turns out to be simply playing in SDR mode, where the V6C performs stably and does not try to pretend to be a HDR television.