Philips PUS7009 (IPS) vs TCL C75B

In terms of HDR effect quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits does not allow for enjoyment of HDR effects, and the image resembles a more standard SDR. There is no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is decidedly insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model could be praised in the context of HDR.

During our test, the TCL C75B "spat out" around 380 nits of brightness. We recorded similar results while watching most of the films we tested. They can be considered average – the television does not perform poorly in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, these results are better than those of budget models, which can achieve almost half the brightness values. However, for HDR enthusiasts seeking stronger lighting effects and greater realism, the C75B may prove insufficient. On the positive side, it's worth mentioning the DCI-P3 colour gamut coverage of 95%. This is a very good result that easily suffices to enjoy a wide range of colours in content available on popular streaming platforms. Vivid and rich colours are definitely a strong point of this model.

The television was tested in film mode, which – despite its name – does not provide accurate image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, causing the image to appear cooler and the colours to lose their natural warmth. The gamma brightness characteristics and the EOTF curve confirm that the television has issues maintaining appropriate brightness – it heavily boosts it, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where the entire image appears as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not favour quality – colour checker tests indicate significant colour variations, making it difficult to achieve faithful image reproduction.

TCL C75B offers several picture modes, but in our opinion, the best choice is the “Film” mode. Although its settings are quite decent, the television struggles with some colour reproduction issues. In our tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered accurate. This effect was particularly evident in skin tones, which appeared unnaturally flushed. The main culprit for this phenomenon turned out to be the white balance, characterised by an excessive amount of blue and red in both HD and 4K HDR materials.

An additional problem was the way brightness was rendered. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, disappearing into complete blackness (e.g., the lower part of the screen in the comparison photo - around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that we might encounter a similar problem in 4K HDR content.

Thanks to our experience and the right tools, we decided to take matters into our own hands and see how much we could extract from this model after professional calibration. We describe the details in the next section.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the previous impression of a picture that was too cool. Calibration has brought noticeable benefits in terms of tonality – shadows and midtones are now more realistic, and the overall effect seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristics remain problematic, despite our efforts, and due to the poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

After calibrating the TCL C75B, it has clearly improved in terms of colour reproduction. Although the television does not offer many options for adjusting the white balance, we managed to enhance its settings quite significantly. As a result, the image is no longer excessively pink, and the colours now look much more natural and harmonious.

The gamma jump, which was previously an issue, has not completely disappeared, but we have managed to reduce it considerably. This has made details in dark scenes more visible – both in HD and 4K HDR materials.

Unfortunately, the lack of local dimming is still noticeable. The "blooming black" effect remains, but that is a limitation of the display itself. Nevertheless, the colours after calibration look far better, and the image is much more enjoyable to watch.

When it comes to tonal transitions in low-quality material, a feature named "Distortion Reduction" (set to "minimum") effectively improves gradation, eliminating ugly tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur the grain or good-quality material, it can introduce undesirable effects and blur elements that should remain sharp when the signal is poorer.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped image edges, meaning no overscan, which allows for the display of the full frame without loss. The image is noticeably enhanced, making characters and backgrounds, such as the model or branches in the background, appear quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desirable details in the distance, the results are good enough to satisfy most users.

TCL C75B has a tone transition smoothing function, but unfortunately, we cannot commend it. Regardless of the selected level – low or high – tone transitions in older materials remained visible, as if the function wasn't working at all. It's hard to say anything positive about it, as in practice it seems completely useless.

The image scaling is better. The television performs quite decently, although on thinner elements, like branches in the background, you can notice slight jaggedness. However, this is not something that significantly interferes with daily viewing.

Unfortunately, a bigger problem turned out to be overscan, which is cutting off the edges of the image. In our tests, there were instances where news tickers or other elements near the edge of the screen were cut off. This is definitely something to pay attention to, especially if we use the television for watching news programmes or content with text on the screen.

Philips PUS7009 does not have any motion smoothing features for films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the comfort of watching dynamic scenes.

The TCL C75B definitely has something to offer gamers. The television is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really impressive results, especially for a model from the entry-level range.

In addition, there are features for improving fluidity and reducing motion blur in films. The "Motion" option allows precise adjustment of the effect on a 10-point scale, which offers great personalisation possibilities - everyone can set the fluidity as they like.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite the use of HDMI 2.0, the television offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the television to low latency mode, allowing for quicker response times during gameplay, while VRR dynamically adjusts the refresh rate to reduce the tearing effect. Game Bar is a tool that provides quick access to game settings and real-time monitoring of parameters - although we believe it appears the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the television's ability to deliver smooth and fully detailed experiences during dynamic gameplay.

The TCL C75B is undoubtedly a television designed with gamers in mind. It offers nearly everything that even the most demanding console users could need. With the implementation of fully capable HDMI 2.1, the television supports features like ALLM (Automatic Low Latency Mode) and VRR (Variable Refresh Rate) – operating within the full potential of the television, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, allowing for even better detail reproduction in HDR-optimised games. The C75B is also equipped with a very convenient interface for gamers in the form of Game Bar, where all key parameters such as refresh rate, input lag, and image settings can be checked – all within a single click.

In a nutshell: the C75B is a great choice for gamers, offering a wide range of features that allow users to fully enjoy the capabilities of modern consoles and games.