Philips PUS7009 (IPS) vs Samsung Q6F (IPS)

In terms of HDR effect quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits does not allow for enjoyment of HDR effects, and the image resembles a more standard SDR. There is no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is decidedly insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model could be praised in the context of HDR.

The Samsung Q6F is, unfortunately, a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is a value that is decidedly too low to even talk about any effect of “high dynamic range,” or HDR. In practice, it’s better to stick to content in SDR format, which simply looks more predictable on this television. Another problem is the global dimming technique – in scenes with a lot of black, the television drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and the brightness can drop below 100 nits. The only consolation is supposed to be the QLED technology, but even here it is average. The layer of quantum dots used is not of the highest quality, as the coverage of the DCI-P3 colour palette does not exceed 90%. As a result, the colours in HDR content may simply appear under-saturated.

The television was tested in film mode, which – despite its name – does not provide accurate image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, causing the image to appear cooler and the colours to lose their natural warmth. The gamma brightness characteristics and the EOTF curve confirm that the television has issues maintaining appropriate brightness – it heavily boosts it, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where the entire image appears as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not favour quality – colour checker tests indicate significant colour variations, making it difficult to achieve faithful image reproduction.

We tested the television in Filmmaker mode, which showed us two completely different facets of this model. Looking at SDR content, we were genuinely shocked at how good this television looks straight out of the box. It was really difficult to find fault with anything here. Despite a slight 'muddiness' in the white balance or somewhat brightened details in the blacks (which directly stem from the design of the IPS panel), the colour errors hovered around a level of '2'. This result is not only surprisingly good but downright amazing, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colours after switching to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so enormous that our charts literally ran out of scale. Of course, since Samsung even in such an affordable model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the previous impression of a picture that was too cool. Calibration has brought noticeable benefits in terms of tonality – shadows and midtones are now more realistic, and the overall effect seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristics remain problematic, despite our efforts, and due to the poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at the '1' level are something generally seen in devices costing several thousand pounds. In this regard, the Q6F is really an excellent screen for everyday television, less demanding series or films. Unfortunately, our intervention in the HDR mode did not bring a noticeable improvement. The television, due to its poor blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR exists mainly as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

When it comes to tonal transitions in low-quality material, a feature named "Distortion Reduction" (set to "minimum") effectively improves gradation, eliminating ugly tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur the grain or good-quality material, it can introduce undesirable effects and blur elements that should remain sharp when the signal is poorer.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped image edges, meaning no overscan, which allows for the display of the full frame without loss. The image is noticeably enhanced, making characters and backgrounds, such as the model or branches in the background, appear quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desirable details in the distance, the results are good enough to satisfy most users.

Q6F performs very well in upscaling lower-resolution content to native 4K. The scaling here is surprisingly good, even for such an inexpensive television from the QLED series. The only downside is the situation where we are watching very low-resolution materials, such as 576p (typical for old DVD players) – in which case the image may be slightly cropped. This is due to the fact that the television does not allow the Overscan function to be turned off, which is a typical issue with Samsung devices.

The situation is completely different when it comes to digital processing, specifically the attempt to smooth the image of unwanted artifacts. Here the television completely fails. Although there is a function in the menu called "Noise Reduction," it yields no visible results regardless of the slider setting. The only thing it manages to do is introduce undesired errors in the image. Despite its presence in the system, we definitely do not recommend using it.

Philips PUS7009 does not have any motion smoothing features for films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the comfort of watching dynamic scenes.

The 60 Hz panel in the Samsung Q6F is standard for this price range, making it rather average for dynamic sports or gaming. However, when it comes to films, the television performs quite well thanks to the motion smoothing feature. The "Motion Reduction" option allows you to adjust the smoothness of movement to your own preferences – from maintaining a cinematic character to complete fluidity.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite the use of HDMI 2.0, the television offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the television to low latency mode, allowing for quicker response times during gameplay, while VRR dynamically adjusts the refresh rate to reduce the tearing effect. Game Bar is a tool that provides quick access to game settings and real-time monitoring of parameters - although we believe it appears the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the television's ability to deliver smooth and fully detailed experiences during dynamic gameplay.

We're not going to beat around the bush – the Q6F is not a television designed for gamers. Although it features additions like ALLM (automatic low latency mode) and VRR frame synchronisation for consoles, the list of advantages basically ends there. Aside from these basics, the television offers nothing more that would satisfy those who spend a lot of time in front of a console. It’s a great shame that such a useful tool as Game Bar, which allows for quick control of game parameters in Samsung's higher models, is missing here. In terms of gaming, this model is absolutely basic and is only suitable for "casual" gamers.