Philips PUS7009 (IPS) vs Haier Q80FUX

In terms of HDR effect quality, PUS7009 (IPS) performs very poorly. A brightness level of 250 nits does not allow for enjoyment of HDR effects, and the image resembles a more standard SDR. There is no talk of dynamic effects or vivid bursts of light. The coverage of the DCI-P3 colour gamut is only 75%, which is decidedly insufficient. The lack of full colour coverage means that the colours are not as vibrant as they should be, resulting in a flat and unconvincing image. There are no aspects for which this model could be praised in the context of HDR.

Alright, let’s move on to the topic that stirs up so much discussion, namely the capabilities of the television in HDR mode. Let’s state it clearly right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s terms is the absolute minimum to even talk about the presence of High Dynamic Range (HDR). On the positive side, this power is at least stable – regardless of which test pattern or film scene we used, the measurements consistently oscillated in the range of 300-350 nits. These are therefore results that are at best sufficient, definitely far from the dazzling display of capabilities we are accustomed to with more expensive models. Fortunately, there is one aspect in which the Q80FUX compensates for these shortcomings and does so impressively. After all, we are talking about a QLED television (more precisely PFS LED), which means that thanks to the quantum dot filter applied to the panel, it can generate really juicy, vibrant colours. These are not empty promises – a DCI-P3 colour gamut coverage of nearly 95% is an impressive result and directly translates into colours that are very pleasant to the eye and saturated.

The television was tested in film mode, which – despite its name – does not provide accurate image display. The white balance in both 4K HDR and HD/SDR content is characterised by drops in red, causing the image to appear cooler and the colours to lose their natural warmth. The gamma brightness characteristics and the EOTF curve confirm that the television has issues maintaining appropriate brightness – it heavily boosts it, resulting in an unnaturally washed-out image. This effect can be seen in the comparisons below, where the entire image appears as if it has a milky filter applied. Additionally, the limited coverage of a wide colour gamut also does not favour quality – colour checker tests indicate significant colour variations, making it difficult to achieve faithful image reproduction.

Factory settings for movie mode are rarely perfect, but in the case of the Q80FUX, we were confronted with a noticeable imbalance. In SDR content, the image was decidedly too warm, a result of excessive red in the white balance, giving the whole a slightly sepia tone. Ironically, in HDR materials, the television fell into the opposite extreme – an excess of blue caused an unnatural, cold effect in perception. However, it was not the capricious white balance that was the biggest problem with this television. The real culprit, responsible for the aforementioned issues, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused persistent clipping of the brightest parts of the image, overlaying them with that characteristic milky filter. Thus, we found the source of the problem. This state of affairs led to general, significant colour errors, which were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and the results of these adjustments can be found in the next paragraph.

After calibration, the picture has significantly improved, especially in terms of white balance, which is now more stable, and the shades have taken on a natural quality, eliminating the previous impression of a picture that was too cool. Calibration has brought noticeable benefits in terms of tonality – shadows and midtones are now more realistic, and the overall effect seems more harmonious. Unfortunately, hardware limitations still affect the quality of the image. The brightness characteristics remain problematic, despite our efforts, and due to the poor coverage of the DCI-P3 and BT.2020 colour gamut, delta E errors are still at a high level. Although calibration has improved some aspects, the television still does not allow for complete satisfaction.

The results of our calibration procedures must, regrettably, be acknowledged as twofold. Generally speaking, the picture is undeniably better than before the corrections; however, the biggest winner of this process turned out to be SDR content. It is precisely there, after correcting the gamma and white balance graphs, that we achieved results that can confidently be called very good. After adjustment, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most difficult skin tone reproductions. Unfortunately, the weakest link remains HDR content. Here lies the paradox: despite having calibrated the white balance to nearly perfection, the overall colour errors still remain at quite a high level. The reason is that the television continues to interpret static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image burn-out effect, which inevitably leads to significant distortions. Although we have successfully eliminated the factory excess of blue, it is precisely due to this interference of electronics that the screen still tends to stray into somewhat overly cold tones. That is just how this television is.

When it comes to tonal transitions in low-quality material, a feature named "Distortion Reduction" (set to "minimum") effectively improves gradation, eliminating ugly tonal transitions. However, this setting on Philips televisions is quite aggressive – while it does not blur the grain or good-quality material, it can introduce undesirable effects and blur elements that should remain sharp when the signal is poorer.

In terms of image scaling, Philips PUS7009 performs reasonably well. A significant advantage is the absence of cropped image edges, meaning no overscan, which allows for the display of the full frame without loss. The image is noticeably enhanced, making characters and backgrounds, such as the model or branches in the background, appear quite detailed and natural, even with lower quality signals. Although scaling is not perfect, as it can remove desirable details in the distance, the results are good enough to satisfy most users.

If there is one area where Haier clearly shows it still has a long way to go compared to the market leaders, it is digital image processing. The upscaling, well... is just alright. And that’s really about all that can be said about it. It does what is expected of it: it ensures that lower resolution signals do not scare us with harsh pixelation on the screen and do not look like a forcibly enlarged postage stamp. However, it is far from the finesse and “intelligent” sharpening that more experienced players in this market have developed over the years. The biggest shortcoming of the Q80FUX software is the almost complete lack of any additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient improvement mechanisms. This means that with older or heavily compressed materials, we simply have to come to terms with the fact that any imperfections in tonal transitions or blending of colours, which we mentioned earlier, will continually accompany us during the viewing.

Philips PUS7009 does not have any motion smoothing features for films, which means we cannot choose whether the picture should be more choppy or more cinematic. These features could improve more dynamic scenes. As for motion blur, despite using a 60Hz IPS panel, the situation looks quite good. The response time between pixels is better than in versions with a VA panel, which keeps motion blur at an acceptable level and does not significantly affect the comfort of watching dynamic scenes.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60-hertz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as we shall see shortly, in reality only one) that are supposed to improve the experience with older film productions. There is a "De-Judder" slider available, which actually controls the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us just beside it in the menu. There is also a second slider, supposedly dedicated to removing blur – a feature we typically encounter in 120Hz panels to combat motion blur in sports. However, as we expected, recalling memories from the tests of the K85F model, this slider here is merely a façade. Its adjustment does absolutely nothing to the image and it simply appears to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

In terms of compatibility with consoles, Philips PUS7009 is suitable for casual gamers. Despite the use of HDMI 2.0, the television offers access to features such as ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and Game Bar. ALLM automatically switches the television to low latency mode, allowing for quicker response times during gameplay, while VRR dynamically adjusts the refresh rate to reduce the tearing effect. Game Bar is a tool that provides quick access to game settings and real-time monitoring of parameters - although we believe it appears the weakest compared to competing Game Bars.

Unfortunately, more demanding gamers may be disappointed. The Philips PUS7009 does not support advanced HDR formats in games or high refresh rates, due to the use of a 60 Hz panel. The lack of support for these features limits the television's ability to deliver smooth and fully detailed experiences during dynamic gameplay.

Stepping into the realm of gaming, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer". Onboard, we find highly desired features such as VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). However, the biggest surprise is something else altogether. Although we are not dealing with a 4K@120Hz panel here, the television is capable of accepting and displaying a 120Hz signal at a lower resolution (Full HD). This is a very useful feature that allows for a conscious switch of the console to a lower resolution mode in exchange for significantly higher smoothness, which is a compromise entirely acceptable in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar", as it's merely a nice addition. The most concerning issues arise when we delve into the world of HDR in gaming. Due to the television constantly adapting the signal "in its own way", setting the brightness on the console according to the HGIG standard is nearly impossible to achieve as per instructions. Worse still, in the Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a value high enough to render this mode practically unusable. However, in general, we would not recommend gaming on this television in HDR mode, so these are not such grave shortcomings. What is most pleasing is the presence of 120Hz in Full HD, which makes the Q80FUX a rather nice television for the occasional gamer.