Philips PUS7000 vs Samsung S85F (WOLED)

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

For the majority of the time, let's say in 90% of film scenes, viewers will see virtually no difference between the versions of the S85F. When small, but very bright light points appear on the screen – a lantern in a dark alley, an explosion, the sun breaking through the clouds – this WOLED panel (similar to the smaller S85F) performs exceptionally well. Our measurements indicated a peak brightness of around 750 nits. We can state with full confidence: this is a great result that guarantees fantastic HDR effects. The problem arises in a very specific, uncomfortable situation for any OLED. We're talking about the moment when the entire screen must light up at full power brightly. Examples include a scene with a white background, a skiing scene, or our test sequences (5) from the film The Meg. And here, unfortunately, the results diverge significantly to the detriment of the variant with the WOLED panel. Our measurement equipment was able to register a maximum brightness of around 250 to 300 nits in such conditions. To be clear: the same model with a QD-OLED panel in the same test is nearly twice as bright. The second matter: colours. And here, we also have to be honest – QD-OLED has a structural advantage. Why? It's simple. QD-OLED generates colours from three components (red, green, and blue) and does not require an additional white subpixel. The WOLED panel we are testing here uses that white subpixel mainly to boost overall brightness. The effect is that QD-OLED is able to show a slightly wider colour palette and the colours are somewhat "purer". But to be clear: it's not that the colours on this WOLED panel are bad! On the contrary, they are really very good. The coverage of the DCI-P3 film palette at 97% and 71% for the broader BT.2020 palette is still high-end. We just need to honestly admit that this few percentage points of advantage in colour coverage lies with QD-OLED technology and may be noticeable in very specific moments.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

When it comes to factory colour reproduction, our test sample in SDR mode suffered from a slight deficit of red and yellow colours. This resulted in a faint yellowish tint visible in shades of white. However, this is not the biggest problem with the S85F. As with the variant with a QD-OLED panel, the main issue with this model is the way it presents HDR content. When we look at the EOTF curve chart, it is easy to see that the television has quite significant problems with strong image clipping. Such behaviour causes the final image in many scenes to become very unnatural.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

After conducting calibration in Filmmaker mode, we managed to eliminate most of the unwanted effects. In SDR content, the television performs excellently, with its colour reproduction errors not exceeding a value of 2, which is an outstanding result. HDR content looks slightly worse, though still very good. Although we were able to eliminate the significant unnaturalness of the image caused by the excessively high EOTF curve, the most discerning observers may notice that it is not perfectly aligned. It runs slightly below the reference curve, which would suggest that the S85F has minor difficulties in showcasing all the details in the image. We must emphasise here that it is very unlikely that the average viewer will notice any shortcomings in the image. The final effect after calibration is evaluated as exemplary.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

The processing of tonal transitions (gradients) in the S85F is at a high level. The television effectively handles posterisation (the "banding" effect of colours), even with heavily compressed content, e.g., from streaming services. However, using this feature requires a certain compromise. We noticed that the noise reduction algorithm is quite aggressive – even at the lowest setting, it can eliminate natural film grain, which for many viewers is part of the film's aesthetics. The "Standard" setting seems to be a happy medium, not causing a noticeable loss of important details, which is why we can recommend it. However, we advise against using the "High" level, which, in addition to noise, also removes desirable details such as texture or structure of objects on the screen.

The upscaling process of lower resolution content works very well in the S85F. The image is sharpened and clear. The only minor imperfection we managed to observe is occasional, subtle aliasing on the edges. The television still exhibits characteristics typical of this manufacturer, namely active "overscan" (slight image enlargement). It is worth keeping this in mind, especially when watching older content, as it may result in minimal clipping of the original frame.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

S85F is a model with impressive speed. The use of a 120 Hz OLED panel ensures that dynamic scenes, both in games and during sports broadcasts, meet expectations: smoothly, sharply, and without loss of clarity. A key role here is played by the instant response time of the pixels, which is a natural advantage of OLED technology. Frame transitions are instantaneous, and the image remains clear even during the fastest camera movements. Moving objects, such as a ball on the pitch or a car in a chase scene, are clear and devoid of the characteristic motion blur associated with LCD panels (the so-called "ghosting").

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.

The 85F has practically everything on board to become the dream screen for gaming. It features four full-fledged HDMI 2.1 ports with a bandwidth of 48 Gb/s, support for VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). Additionally, there's a super-detailed Game Bar, which clearly displays all the key parameters. However, the real gem is the Game Motion Plus feature. This motion smoother dedicated to games makes animations more pleasant to the eye while only slightly increasing input lag. This is a rare and well-working combination, for which Samsung deserves great applause.

Now for the moment where we have to complain a bit. The lack of Dolby Vision in Samsung TVs is already a standard, so there's no point in holding out hope (unless something changes in the future). Unfortunately, it's much harder to explain the disappearance of support for HGiG after one of the software updates. HGiG (HDR Gaming Interest Group) is a key mode that allows for precise brightness representation in HDR games, according to the creators' intent. Without it, HDR calibration on consoles becomes less precise, potentially leaving us with images that are too dark in the shadows or excessively blown out in the bright areas. Perhaps Samsung will fix this in the next update – we have high hopes for that. Because if HGiG returns, the S85F will become nearly the perfect TV for gamers.

[UPDATE] We have updated our tests of Samsung TVs from the 2025 model year due to the release of software version 1131, which has restored the HGiG feature essential for gamers.