Philips PUS7000 vs Philips OLED811

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Philips OLED811 uses a new generation of WOLED EX panels, also found in models such as the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see this clearly in films and series. All kinds of bright flashes have the right intensity, especially when they appear against a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that does not mean you will see that level of brightness in every shot. When the screen is filled with a large amount of white or a wide explosion, brightness falls to around 600 nits. That is still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. You get saturated reds and lush greens, and when watching it’s hard to find major faults in that respect. It looks a little worse with the much wider BT.2020 gamut, whose most saturated shades are already out of reach for this panel. There is also the issue of the white subpixel that the WOLED panel uses to boost brightness. With very bright colours you can see a certain washout: the colour is bright but loses some of its intensity. It is precisely in such situations that QD-OLED panels from Samsung Display have the advantage. However, in most films and series this is not something that will immediately stand out.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

Film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain small, both in SDR and HDR, so you can sit down to watch without adjusting the settings first. There are no major inaccuracies that would immediately distract from the film. It falls a little short of perfection, though. The white balance shows a slight lack of red compared with green, so whites and greys can have a faint greenish tint. It is not a strong colour cast, but measurements clearly show it. There are also minor brightness deviations in SDR: some parts of the image are slightly brightened, and the darkest shades are not always reproduced evenly. In HDR the TV sticks much closer to the reference, although in places it gently lifts detail from the shadows. These are generally areas that could be improved. The factory film mode provides a good starting point, and calibration will reveal how much more can be gained from it.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to correct the white balance and eliminate the slight tint visible in the factory settings. Errors in the Color Checker measurements for SDR and HDR fell to around 1 to 2, and many samples are even below 1. That's a level at which differences from the reference image are hard to spot with the naked eye. We also improved the gamma, and only in the brightest whites is there a slight brightening remaining. In HDR the EOTF curve also tracks the reference closely, although the TV still tends to gently boost the brightness of small elements, such as stars or on-screen text. This gives the picture a little extra sparkle that shouldn't be there, but otherwise there's little to fault. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

OLED811 handles lower-quality material reasonably well, though it falls well short of perfection. The "Banding reduction" function helps to smooth tonal transitions and on the low setting gives a fairly good result. It does not remove bands between shades as effectively as similar solutions from some competitors, but at least it does not introduce new artefacts in the process. This is a sensible setting for everyday viewing. There is still some dissatisfaction, however, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' implementations, cope with the effects of heavy compression more effectively even at similarly low settings. Much therefore depends on how a given manufacturer makes use of its capabilities. We have a few more comments about the upscaling to 4K. There is a lot of detail, but the overall image looks rather soft. Edges are heavily smoothed, which robs the picture of a bit of sharpness and clarity. This can be partly corrected with the sharpness slider in the menu, though that will merely accentuate outlines rather than recover detail. On the plus side, there is no overscan; even with an SD signal the TV does not crop the edges of the picture.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

In terms of motion handling the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sport, the picture stays clear and moving objects do not leave noticeable smears. The fast response of OLED pixels helps here; this is clear in the UFO test, even on dark backgrounds. There are also motion smoothing controls. For films you can adjust the level of smoothing to suit your taste, ranging from preserving a cinematic character to much smoother motion. A separate blur reduction setting is useful for fast-paced material such as sports broadcasts.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.

OLED811 has almost everything you could expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach 165 Hz. It also has VRR, which helps prevent screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

Another plus is that HGiG works correctly, so once HDR is set on the console the TV doesn't apply its own changes to image brightness. There's also a Game Bar to check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for gaming, but there is a significant catch, which you can read about below.