Philips PUS7000 vs LG OLED B6

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year’s B5. That’s down to the new, budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR look fuller in many scenes than on last year’s lower‑end OLEDs. That does not mean the B6 has no limitations. In very bright shots, when a large part of the screen is strongly lit, brightness can fall below 400 nits. This behaviour is typical for OLED TVs, especially in this segment, and that’s where you see the biggest difference compared with more expensive models. Even so, we judge the B6’s results as genuinely solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that films truly feel like a step up from ordinary SDR. Colour gamut Using the OLED SE panel has had a slight impact on wide colour gamut coverage. Compared with last year’s model the results have fallen by a few percentage points. It covers roughly 96% of DCI‑P3 and about 71% of BT.2020. That doesn’t mean the colours on the LG B6 are weak. In most films and series they look lively, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD‑OLED panels. This stems from the WOLED panel structure. Besides red, green and blue subpixels it also uses a white subpixel, which helps to boost brightness. However, this comes at a price. At very high luminance some colour is effectively 'diluted' by the white light, so the saturation of certain colours can be slightly lower. In everyday use this isn’t a major issue, but in the most demanding scenes you can notice it.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes produce very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is, in any case, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. On SDR material the factory settings perform really well. Colour errors are small, the gamma response is correct, and the picture during normal viewing looks natural and does not feel overly "pumped up". It's a bit worse with HDR. When such content is played you quickly see that the white balance hasn't been set perfectly. Too much blue and red gives the image a slightly pink tint. This is also confirmed by colour gamut measurements and the ColorChecker, where samples clearly shift in that direction. It's not a flaw that completely spoils the picture, but it is noticeable with HDR films. Therefore anyone who wants the most faithful image should consider calibration, which we cover further on in the review.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

During calibration, we concentrated mainly on HDR content, because that's where the factory settings needed the most correction. We did not, however, neglect SDR mode, which after adjustment was brought almost to perfection. Colours are very accurate, and brightness is controlled as it should be. The biggest improvement in HDR came from fixing the white balance. Removing the excess red and blue eliminated the pinkish tint, and the image became much more natural. Skin tones, whites and all colours that had previously shifted towards pink improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. So the LG B6 can deliver a very accurate picture, particularly for the manufacturer's entry-level OLED model.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

The LG B6 handles lower-quality material very well. This is largely thanks to effective digital image processing, which can mask some of the source’s imperfections without overly smoothing the whole scene. The "Smooth Gradation" function proves particularly useful. It noticeably reduces posterisation, especially in dark parts of the image. The safest choice remains the Low or Medium setting. The function still effectively smooths out unsightly tonal banding, but does not yet interfere too much with fine details. Purists can of course leave it switched off. Upscaling to 4K also performs very well. Full HD and 720p material retain a good amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations only become apparent with very poor sources below 720p, where the smallest text and fine elements are not always perfectly sharp, but this applies to almost every other TV on the market.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

One of the biggest advantages of OLED panels is the very fast pixel response time. This keeps the picture sharp and free of the visible smearing often seen on LCD TVs. However, there is a downside. During slow camera pans motion can look choppier than on LCD screens, where some of that effect is naturally masked by the slower panel. Fortunately, on the LG B6 this can be easily mitigated using the TruMotion system. With the motion smoothing set correctly you can achieve smoother motion without giving the picture an exaggerated soap opera effect.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.

LG OLED B6 has plenty to offer gamers; it’s simply a complete base for PS5, Xbox Series X/S or a capable PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can avoid irritating cable swapping when connecting several newer devices at once. It offers a full suite of synchronization technologies, from standard VRR to G-Sync and FreeSync. The screen synchronises the refresh rate seamlessly with the frame output from the console or graphics card. Of course it includes ALLM: the B6 automatically recognises when a game is running and immediately reduces latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG standard means that, after initial calibration in the console settings, the image won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on the cake is the Game Bar. Instead of digging through the full menu during gameplay, a single click is enough to adjust shadow visibility, tweak selected parameters or simply check the current display mode. All of this makes the LG B6 an excellent choice for gamers.