Philips PUS7000 vs Hisense A6Q

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The Hisense A6Q is unfortunately difficult to recommend for watching HDR content. The main issues are low brightness and rather modest coverage of a wide colour gamut. The measured brightness of around 300 nits simply isn't sufficient for HDR materials to look impressive. In practice, the picture often resembles standard SDR instead of true HDR with clear differences in brightness and dynamics. Additionally, the colours in such materials do not appear as they should. The television does not utilise additional filters such as QLED or PFS LED, and the coverage of the DCI-P3 colour space at around 80% means that some colours look rather washed out. Consequently, some scenes in HDR materials lose intensity and spectacle, making it difficult to speak of a full HDR experience.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

We conducted the tests in the best available mode, namely Filmmaker, however – as is often the case – this does not mean an ideal image straight out of the box. In the case of Hisense A6Q, this mode clearly "swallowed" too much blue in everyday SDR content. In practice, this led to an image with a yellowed white, particularly noticeable on large, bright surfaces. This is not due to poor assumptions of the Filmmaker mode itself or the vision of filmmakers, but rather the factory settings requiring adjustment.
Furthermore, looking at the saturation characteristics and the gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

The colours after calibration in the Hisense A6Q should be assessed in two ways, as everything depends on the type of content. In the case of SDR material, the effect is truly very good. In everyday programmes, series, and films, it is difficult to spot any serious problems with colours. The yellow tint has been effectively removed, and the television no longer brightens the entire image. As a result, the ColorChecker test showed errors below Delta 2 values, which are already outstanding results, allowing us to speak of very high image quality in standard content. Unfortunately, the situation looks significantly worse in the case of HDR material. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means the television still generates quite significant colour errors. Certain colours simply cannot be displayed by the screen, making them appear less saturated than they should be. It's a shame because even a simple PFS or QLED filter would significantly improve the final effect. The conclusion is therefore simple – the A6Q is really very well suited for SDR content after calibration, while watching HDR content on it should still be approached with caution.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

Upscaling on the Hisense A6Q works quite decently for a television in this price range. Materials of lower resolution are correctly "upscaled" to a higher one, and the image remains clear without artificial edge enhancement or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly worse. In practice, it is difficult to speak of any advanced artifact smoothing or problematic tonal transition masking. In heavily compressed films – especially those from YouTube – the television practically struggles with reducing compression blocks and unwanted banding, making the imperfections in the material clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the quality of the source.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

The motion fluidity of the Hisense A6Q is… well — quite mediocre. It’s a television with a native refresh rate of 60 Hz in 4K, which means that the motion of objects on the screen doesn’t always look perfectly smooth. In dynamic scenes in movies or sports, it’s clear that this isn’t the strongest feature of this model. The situation improves significantly with 1080p content when connecting a console or computer, as the A6Q can operate even at 120 Hz then. This is a big plus, especially for gamers. Nevertheless, the clarity of motion still leaves much to be desired; blurring is noticeable, and the response time of the panel indicates that it is not one of this television’s strong points.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.

For such an inexpensive television, the Hisense A6Q can truly surprise with what it offers to gamers. It operates in 4K only at 60 Hz, but when a game switches to performance mode and drops to 1080p, the panel can work even at 120 Hz. This is a significant advantage in this price range, as most titles on consoles don't achieve stable 4K at 120 frames per second anyway. In practice, we are realistically playing at 1080p, and here the A6Q provides very enjoyable gaming experiences. On top of that, there are several features usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so there's no need to dig through the entire menu. For such an affordable piece of equipment, it's a really solid set for gamers — perhaps not for the most demanding, but certainly spot on for occasional gaming.