Philips PML9009 / 9019 / 9059 vs Sony Bravia 9 (XR90)

Philips PML9009 does not really operate at the highest values in HDR content. Most effects with brightness at around 550 nits will not leave us thrilled with the lighting effects, although they are quite stable, which is a plus and will make a considerable difference compared to SDR content. It is worth noting that we can only achieve a good result in one scenario, namely in the film "Gemini", where the flashlight as the only light source can shine. Why in that scene specifically? The answer is quite simple. The scene itself does not contain a large amount of black, and the flashlight is not as large an object as the sun in the first and last scenes. Overall, the brightness measurement results in HDR content do not provide a basis for recommending this television for viewing productions that utilise a wide colour spectrum. Although it is worth noting that this model can cover it to a decent extent of 93% in the case of the DCI-P3 palette.

The results of brightness measurements on the Sony Bravia 9 are phenomenal. Each scene reaches well over 1500 nits, and when watching films, the television can sometimes shine even brighter. It goes without saying that such brightness allows for unprecedented experiences and engagement with video material at the highest possible quality. Thanks to the high coverage of the DCI-P3 colour palette, the image is full of colours and, combined with such high luminance, it practically breathes. With high peak brightness, viewers can enjoy the full range of colours even in the most challenging scenes, such as those based on dynamic lighting changes. The Bravia 9 offers support for Dolby Vision and HDR10 formats, which further enhances the viewing experience.

The best factory mode used during our tests was "Filmmaker". Here, we will look at both SDR and HDR content. The element that distinguishes them is primarily the EOTF curve in materials with a wide colour gamut and the gamma in those recorded "the old way". Starting with SDR films and series and the most basic thing we can observe, which is white balance, we see a significant dominance of red colour. This led to a yellow tint across the entire image, causing unnaturally looking faces and yellowed whites. This flaw is also evident on the "ColourChecker" palette, where all colours have shifted towards their warmer counterparts. Looking at a more significant graph, that of the gamma responsible for image contrast, we see considerable errors starting from the very beginning. From the left, the value we measured, marked by a connected ellipsis, clearly spiked upwards, causing complete merging of details in the darkest scenes. This state of affairs remained until 10% screen brightness, after which it dipped below the reference orange line, leading to a deterioration in contrast, which, as we know, the Philips PML9009 already lacks. In HDR materials, the white balance issues were very similar to those in SDR content. The discrepancy arises when checking the EOTF curve, which controls the rate of brightness increase and severely limited it, causing the image to appear unnaturally dark. As for the colours themselves, there were more reasons for concern here, as the television's too low luminance caused a huge discrepancy between the actual state and the correct one, which is perfectly visible on the error graph, often exceeding the scale.

The best factory mode in Sony televisions has consistently remained "IMAX Enhanced" for years. It was this mode that we used throughout the entire testing procedure. Although it is indeed the most similar to the standard compared to other predefined options, it has a number of aspects that can be improved to make viewing even more enjoyable. When we look at the gamma in SDR materials, we notice quite a significant boost that will be associated with image contrast. It is worth noting that the very beginning of the graph has an even greater rise compared to the reference, leading to a blending of details in the blacks, creating a uniform blot. The EOTF curve in HDR content looked quite correct and exhibited only minor deviations from the reference. However, a common feature for both was: a green colour dominance in white balance, issues with greys and overall colour misalignment. The aspect that stood out the most was related to the uneven distribution of hues in white balance. Due to the excess of the aforementioned colour, the image was covered with an unpleasant greenish tint.

Philips PML9009, like most leading manufacturers, has been offering advanced tools for the calibration process for years. Thus, we find 2- and 20-point greyscale adjustment as well as an advanced CMS (Colour Management System). The differences resulting from calibration are evident, and even someone not paying attention to picture quality (although there probably aren't many such here) will notice a positive difference. Both SDR and HDR materials have undergone a significant transformation. The former, as well as the latter, have primarily rid themselves of the unpleasant yellow tint resulting from a red colour dominance in white balance. As for the SDR materials and gamma, although it is not 'lined up' perfectly and still loses dark details, the rest of it is on a more than decent level, and minor errors will not be noticeable. The colours themselves look infinitely better, and thanks to low deltaE errors, they are nearly reference-quality. On the other hand, the HDR materials, due to the low luminance of the unit, were not blended as we would have liked. Although the white balance has been largely normalised, here and there one can notice a slight blue tint. Fortunately, the EOTF curve turned out to be much more accessible and allowed for practically ideal geometry. Unfortunately, due to the screen's insufficient brightness, colour errors are still quite high.

The colour reproduction after the calibration process should be regarded as excellent. Regardless of the signal, whether SDR or HDR, we can expect an image that is remarkably close to what the film director saw. Virtually every flaw in the image has been modelled and maximally corrected. This was made possible thanks to the advanced tools used for the calibration process, which Sony has been providing in its televisions for years, including 2- and 20-point grey scale adjustment as well as a very comprehensive CMS.

Judging by how PML9009 Philips handled tonal transitions, the image scaling test should perform equally well. This time we are examining the television's algorithms responsible for enhancing the quality of images that have been recorded in lower quality. Such images can be found in various television programmes or older films. In this regard, Philips PML9009 performs quite mediocrely and significantly blurs the image. This is particularly evident in fine branches or the model's hair.

We will take another look at the tonal transitions, which performed remarkably. Within the unit, we find several levels of smoothing. Even the lowest setting can effectively eliminate any non-fluid tonal transition and will work well with the vast majority of content. More importantly, none of the settings for this function softens the effect of film grain, which is extremely important in terms of alignment with the director's vision. However, we note that sometimes it may turn out that fine details will be blurred.

Let’s take another look at the quality of tonal transitions, but this time we will analyse the quality of image scaling, which will be significantly important when watching lower quality materials. For starters, we will take a look at the function responsible for the quality of tonal transitions. And while by default they are quite average, after activating the option, even at the lowest level, we can confidently say that these are among the best we have seen. You can confidently enable this feature, as it does not cause any negative phenomenon, such as film grain blurring.

Sony has been boasting for several years now that its "XR" processor is unmatched when it comes to image scaling. And we find it quite easy to believe, because in fact the image is extremely sharp, yet very natural.

Philips PML9009 is equipped with a panel that has a native refresh rate of 120 Hz. This is the essential minimum for watching all kinds of sports and is recommended for comfortable gaming in favourite titles on consoles or PCs. The manufacturer has prepared an effective system for improving the sharpness of moving images for those who do not like the characteristic stuttering of footage recorded at 24 fps or require a high level of motion fluidity, for example, when watching football matches. In the dedicated tab, we find the "Fluidity" slider, which helps eliminate stuttering, and "Motion Blur Reduction," which aids in increasing the sharpness of dynamic elements. This function works very well and granularly, meaning each setting has a real impact on the perception of motion. With such a set, every user will find their sweet spot. In the picture, we present our choice, which is a slight fluidity enhancement without the soap opera effect.

A matter directly related to motion is the pixel response time of the panel itself. The best in this regard are, of course, OLED panels, followed by IPS and ADS-based units, and finally, VA. Despite the overall good quality of the systems responsible for smoothing the image, the use of a VA panel carries consequences in the form of a black halo behind fast-moving objects. While this will not occur frequently in the tested television, it will be visible here and there.

The maximum refresh rate of the Sony Bravia 9 is 120 Hz. This is the essential minimum for watching primarily sports or materials with significant motion dynamics while maintaining a sharp and smooth image. For demanding users, the manufacturer has implemented a very comprehensive smoothing system, which has been divided into three segments: Smoothness (Film), Smoothness (Camera), and Clarity. The first two correspond to the degree of blurring and the degree of smoothing, respectively. The third option will be described in more detail below. Moreover, we can adjust all settings to various degrees, each of which will produce an effect, ensuring that we can find our own golden mean. In the picture, we present a setting with slight smoothing, without the soap opera effect.

Philips PML9009, equipped with HDMI 2.1 ports at full bandwidth, supports all features dedicated to gamers. The most basic ones, such as VRR and ALLM, are a given, but G-Sync, FreeSync, and gaming in HDR Dolby Vision with low input lag are not. These features activate without any issues and during the tests conducted, they did not present any problems. Such preparation of the television is certainly a strong point and one can say that it is a unit dedicated to gamers. For more advanced users, we also mention that the PML9009 is equipped with an HGIG mode, which will be particularly felt by gamers, as there are still relatively few games supporting Dolby Vision. This mode primarily allows for the adjustment of HDR effects to the capabilities of the television on a special board, in order to avoid dimming or burning out the image.

The television additionally features a special menu - GameBar. This allows for editing the unit's settings "on the fly", without the need to exit the game. We will also find features such as enabling a crosshair or adjusting black levels for better visibility of opponents in shadows.

In a brief summary of this paragraph, the Philips PML9009 is a unit that will certainly capture the attention of gamers. Thanks to its versatility, it will allow playing any title in the highest quality without compromises. Especially since features such as VRR, ALLM, G-Sync, FreeSync, or gameplay in HDR Dolby Vision will enhance the immersion in the favourite title.

The Sony Bravia 9 television is equipped with four HDMI ports. However, somewhat inexplicably for a device of this class, only two of them operate in the 2.1 standard. That said, it should not be overlooked that almost all functions perform excellently and do not cause any negative feelings when being activated. Games running either in HDR10 or Dolby Vision have very low input lag, allowing for a very comfortable session with the title. A consolation remains in the form of a good implementation of the HGIG mode, which, after proper adjustment, does not differ significantly from Dolby Vision.

A year ago, Sony added to its televisions what has long been a standard for some manufacturers. This refers, of course, to the GameBar, enabling quick adjustment of settings without the need to exit the game. The implementation of this feature was successful and works very efficiently. We have been provided with conveniences such as: a crosshair grid, black level correction, and the option to reduce the screen to the proportions of gaming monitors.

The Sony Bravia 9 will undoubtedly find its fan base, most likely among PlayStation enthusiasts. Here, we must admit that it will be the most sensible choice, as in practice both the console and the television possess exactly the same capabilities. Looking at the bigger picture, while overlooking the issues with Dolby Vision in games, one cannot detract from the fact that the Bravia 9 is a very good television in the context of gaming.