Philips PML9009 / 9019 / 9059 vs Samsung Q6F (IPS)

Philips PML9009 does not really operate at the highest values in HDR content. Most effects with brightness at around 550 nits will not leave us thrilled with the lighting effects, although they are quite stable, which is a plus and will make a considerable difference compared to SDR content. It is worth noting that we can only achieve a good result in one scenario, namely in the film "Gemini", where the flashlight as the only light source can shine. Why in that scene specifically? The answer is quite simple. The scene itself does not contain a large amount of black, and the flashlight is not as large an object as the sun in the first and last scenes. Overall, the brightness measurement results in HDR content do not provide a basis for recommending this television for viewing productions that utilise a wide colour spectrum. Although it is worth noting that this model can cover it to a decent extent of 93% in the case of the DCI-P3 palette.

The Samsung Q6F is, unfortunately, a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is a value that is decidedly too low to even talk about any effect of “high dynamic range,” or HDR. In practice, it’s better to stick to content in SDR format, which simply looks more predictable on this television. Another problem is the global dimming technique – in scenes with a lot of black, the television drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and the brightness can drop below 100 nits. The only consolation is supposed to be the QLED technology, but even here it is average. The layer of quantum dots used is not of the highest quality, as the coverage of the DCI-P3 colour palette does not exceed 90%. As a result, the colours in HDR content may simply appear under-saturated.

The best factory mode used during our tests was "Filmmaker". Here, we will look at both SDR and HDR content. The element that distinguishes them is primarily the EOTF curve in materials with a wide colour gamut and the gamma in those recorded "the old way". Starting with SDR films and series and the most basic thing we can observe, which is white balance, we see a significant dominance of red colour. This led to a yellow tint across the entire image, causing unnaturally looking faces and yellowed whites. This flaw is also evident on the "ColourChecker" palette, where all colours have shifted towards their warmer counterparts. Looking at a more significant graph, that of the gamma responsible for image contrast, we see considerable errors starting from the very beginning. From the left, the value we measured, marked by a connected ellipsis, clearly spiked upwards, causing complete merging of details in the darkest scenes. This state of affairs remained until 10% screen brightness, after which it dipped below the reference orange line, leading to a deterioration in contrast, which, as we know, the Philips PML9009 already lacks. In HDR materials, the white balance issues were very similar to those in SDR content. The discrepancy arises when checking the EOTF curve, which controls the rate of brightness increase and severely limited it, causing the image to appear unnaturally dark. As for the colours themselves, there were more reasons for concern here, as the television's too low luminance caused a huge discrepancy between the actual state and the correct one, which is perfectly visible on the error graph, often exceeding the scale.

We tested the television in Filmmaker mode, which showed us two completely different facets of this model. Looking at SDR content, we were genuinely shocked at how good this television looks straight out of the box. It was really difficult to find fault with anything here. Despite a slight 'muddiness' in the white balance or somewhat brightened details in the blacks (which directly stem from the design of the IPS panel), the colour errors hovered around a level of '2'. This result is not only surprisingly good but downright amazing, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colours after switching to HDR mode was a very unpleasant surprise. The errors in colour reproduction and palette were so enormous that our charts literally ran out of scale. Of course, since Samsung even in such an affordable model offers very extensive calibration options, we decided to approach the issue professionally and see what could be done during calibration.

Philips PML9009, like most leading manufacturers, has been offering advanced tools for the calibration process for years. Thus, we find 2- and 20-point greyscale adjustment as well as an advanced CMS (Colour Management System). The differences resulting from calibration are evident, and even someone not paying attention to picture quality (although there probably aren't many such here) will notice a positive difference. Both SDR and HDR materials have undergone a significant transformation. The former, as well as the latter, have primarily rid themselves of the unpleasant yellow tint resulting from a red colour dominance in white balance. As for the SDR materials and gamma, although it is not 'lined up' perfectly and still loses dark details, the rest of it is on a more than decent level, and minor errors will not be noticeable. The colours themselves look infinitely better, and thanks to low deltaE errors, they are nearly reference-quality. On the other hand, the HDR materials, due to the low luminance of the unit, were not blended as we would have liked. Although the white balance has been largely normalised, here and there one can notice a slight blue tint. Fortunately, the EOTF curve turned out to be much more accessible and allowed for practically ideal geometry. Unfortunately, due to the screen's insufficient brightness, colour errors are still quite high.

After our calibration, the colours in SDR mode looked even better – the result is truly surprising, as colour errors at the '1' level are something generally seen in devices costing several thousand pounds. In this regard, the Q6F is really an excellent screen for everyday television, less demanding series or films. Unfortunately, our intervention in the HDR mode did not bring a noticeable improvement. The television, due to its poor blacks and low coverage of a wide colour gamut, still has significant issues with proper colour saturation, especially reds. This is an example of a device where HDR exists mainly as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

Judging by how PML9009 Philips handled tonal transitions, the image scaling test should perform equally well. This time we are examining the television's algorithms responsible for enhancing the quality of images that have been recorded in lower quality. Such images can be found in various television programmes or older films. In this regard, Philips PML9009 performs quite mediocrely and significantly blurs the image. This is particularly evident in fine branches or the model's hair.

We will take another look at the tonal transitions, which performed remarkably. Within the unit, we find several levels of smoothing. Even the lowest setting can effectively eliminate any non-fluid tonal transition and will work well with the vast majority of content. More importantly, none of the settings for this function softens the effect of film grain, which is extremely important in terms of alignment with the director's vision. However, we note that sometimes it may turn out that fine details will be blurred.

Q6F performs very well in upscaling lower-resolution content to native 4K. The scaling here is surprisingly good, even for such an inexpensive television from the QLED series. The only downside is the situation where we are watching very low-resolution materials, such as 576p (typical for old DVD players) – in which case the image may be slightly cropped. This is due to the fact that the television does not allow the Overscan function to be turned off, which is a typical issue with Samsung devices.

The situation is completely different when it comes to digital processing, specifically the attempt to smooth the image of unwanted artifacts. Here the television completely fails. Although there is a function in the menu called "Noise Reduction," it yields no visible results regardless of the slider setting. The only thing it manages to do is introduce undesired errors in the image. Despite its presence in the system, we definitely do not recommend using it.

Philips PML9009 is equipped with a panel that has a native refresh rate of 120 Hz. This is the essential minimum for watching all kinds of sports and is recommended for comfortable gaming in favourite titles on consoles or PCs. The manufacturer has prepared an effective system for improving the sharpness of moving images for those who do not like the characteristic stuttering of footage recorded at 24 fps or require a high level of motion fluidity, for example, when watching football matches. In the dedicated tab, we find the "Fluidity" slider, which helps eliminate stuttering, and "Motion Blur Reduction," which aids in increasing the sharpness of dynamic elements. This function works very well and granularly, meaning each setting has a real impact on the perception of motion. With such a set, every user will find their sweet spot. In the picture, we present our choice, which is a slight fluidity enhancement without the soap opera effect.

A matter directly related to motion is the pixel response time of the panel itself. The best in this regard are, of course, OLED panels, followed by IPS and ADS-based units, and finally, VA. Despite the overall good quality of the systems responsible for smoothing the image, the use of a VA panel carries consequences in the form of a black halo behind fast-moving objects. While this will not occur frequently in the tested television, it will be visible here and there.

The 60 Hz panel in the Samsung Q6F is standard for this price range, making it rather average for dynamic sports or gaming. However, when it comes to films, the television performs quite well thanks to the motion smoothing feature. The "Motion Reduction" option allows you to adjust the smoothness of movement to your own preferences – from maintaining a cinematic character to complete fluidity.

Philips PML9009, equipped with HDMI 2.1 ports at full bandwidth, supports all features dedicated to gamers. The most basic ones, such as VRR and ALLM, are a given, but G-Sync, FreeSync, and gaming in HDR Dolby Vision with low input lag are not. These features activate without any issues and during the tests conducted, they did not present any problems. Such preparation of the television is certainly a strong point and one can say that it is a unit dedicated to gamers. For more advanced users, we also mention that the PML9009 is equipped with an HGIG mode, which will be particularly felt by gamers, as there are still relatively few games supporting Dolby Vision. This mode primarily allows for the adjustment of HDR effects to the capabilities of the television on a special board, in order to avoid dimming or burning out the image.

The television additionally features a special menu - GameBar. This allows for editing the unit's settings "on the fly", without the need to exit the game. We will also find features such as enabling a crosshair or adjusting black levels for better visibility of opponents in shadows.

In a brief summary of this paragraph, the Philips PML9009 is a unit that will certainly capture the attention of gamers. Thanks to its versatility, it will allow playing any title in the highest quality without compromises. Especially since features such as VRR, ALLM, G-Sync, FreeSync, or gameplay in HDR Dolby Vision will enhance the immersion in the favourite title.

We're not going to beat around the bush – the Q6F is not a television designed for gamers. Although it features additions like ALLM (automatic low latency mode) and VRR frame synchronisation for consoles, the list of advantages basically ends there. Aside from these basics, the television offers nothing more that would satisfy those who spend a lot of time in front of a console. It’s a great shame that such a useful tool as Game Bar, which allows for quick control of game parameters in Samsung's higher models, is missing here. In terms of gaming, this model is absolutely basic and is only suitable for "casual" gamers.