Philips PML9009 / 9019 / 9059 vs LG NANO81A / NANO80A

Philips PML9009 does not really operate at the highest values in HDR content. Most effects with brightness at around 550 nits will not leave us thrilled with the lighting effects, although they are quite stable, which is a plus and will make a considerable difference compared to SDR content. It is worth noting that we can only achieve a good result in one scenario, namely in the film "Gemini", where the flashlight as the only light source can shine. Why in that scene specifically? The answer is quite simple. The scene itself does not contain a large amount of black, and the flashlight is not as large an object as the sun in the first and last scenes. Overall, the brightness measurement results in HDR content do not provide a basis for recommending this television for viewing productions that utilise a wide colour spectrum. Although it is worth noting that this model can cover it to a decent extent of 93% in the case of the DCI-P3 palette.

If you are counting on HDR in the NANO81A to bring tears to your eyes, I must disappoint you. This television is simply too dark to truly show what this format is all about. With a brightness of only 250 nits, HDR exists here mainly on paper. In practice, during viewing, it is very difficult to distinguish whether we are watching high dynamic range content or regular SDR – it simply lacks that ‘punch’ of light in the bright parts of the image. However, to give credit where it’s due, we do have a glimmer of hope here – and quite a clear one at that. It concerns the colour gamut coverage. Here, the NanoCell filter shows that it is not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. This is a really solid result that places this model significantly higher than typical budget options based on standard white LEDs without any filters. Of course, it still falls short of the level of quantum dot (QLED) TVs or advanced panels with PFS filters, but for this price point, the colours are surprisingly saturated and vibrant. It's just a shame that this low brightness prevents them from fully ‘spreading their wings’ with the Nano filter.

The best factory mode used during our tests was "Filmmaker". Here, we will look at both SDR and HDR content. The element that distinguishes them is primarily the EOTF curve in materials with a wide colour gamut and the gamma in those recorded "the old way". Starting with SDR films and series and the most basic thing we can observe, which is white balance, we see a significant dominance of red colour. This led to a yellow tint across the entire image, causing unnaturally looking faces and yellowed whites. This flaw is also evident on the "ColourChecker" palette, where all colours have shifted towards their warmer counterparts. Looking at a more significant graph, that of the gamma responsible for image contrast, we see considerable errors starting from the very beginning. From the left, the value we measured, marked by a connected ellipsis, clearly spiked upwards, causing complete merging of details in the darkest scenes. This state of affairs remained until 10% screen brightness, after which it dipped below the reference orange line, leading to a deterioration in contrast, which, as we know, the Philips PML9009 already lacks. In HDR materials, the white balance issues were very similar to those in SDR content. The discrepancy arises when checking the EOTF curve, which controls the rate of brightness increase and severely limited it, causing the image to appear unnaturally dark. As for the colours themselves, there were more reasons for concern here, as the television's too low luminance caused a huge discrepancy between the actual state and the correct one, which is perfectly visible on the error graph, often exceeding the scale.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. Its aim is to display images as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left something to be desired. The main issue turned out to be the white balance. Measurements showed a distinct deficiency of blue colour, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white was not perfectly pure, which detracted from the freshness of the image. Additionally, brightness management was also not ideal – the factory-set gamma was too low. The picture often appeared oversaturated, as if overly lifted from the shadows, which caused it to lose naturalness and depth. Fortunately, LG, even in this relatively low price category, does not block access to advanced settings. The calibration possibilities of this model are enormous, which is a big plus for those who enjoy "digging" in the menu. We decided to approach the topic in our own way and see how much we could squeeze out of this panel with professional calibration.

Philips PML9009, like most leading manufacturers, has been offering advanced tools for the calibration process for years. Thus, we find 2- and 20-point greyscale adjustment as well as an advanced CMS (Colour Management System). The differences resulting from calibration are evident, and even someone not paying attention to picture quality (although there probably aren't many such here) will notice a positive difference. Both SDR and HDR materials have undergone a significant transformation. The former, as well as the latter, have primarily rid themselves of the unpleasant yellow tint resulting from a red colour dominance in white balance. As for the SDR materials and gamma, although it is not 'lined up' perfectly and still loses dark details, the rest of it is on a more than decent level, and minor errors will not be noticeable. The colours themselves look infinitely better, and thanks to low deltaE errors, they are nearly reference-quality. On the other hand, the HDR materials, due to the low luminance of the unit, were not blended as we would have liked. Although the white balance has been largely normalised, here and there one can notice a slight blue tint. Fortunately, the EOTF curve turned out to be much more accessible and allowed for practically ideal geometry. Unfortunately, due to the screen's insufficient brightness, colour errors are still quite high.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools even in such an affordable model deserves a big plus. We managed to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "true". In SDR content (that is, regular television, YouTube, or older films), the picture now looks worlds better – it is clear, well-balanced, and no longer strains the eyes with strange hues. It is clear that this panel has significant potential, which is simply wasted by poor presets out of the box. However, we do have one serious reservation that calibration cannot fully overcome – it concerns brightness management in HDR mode. LG's algorithm in this model is constructed very conservatively. The television intentionally dims the HDR picture to avoid overexposing the already weak blacks of the IPS panel. The programmers faced a choice: either to provide more light and accept that the blacks would become light grey or to reduce the brightness to maintain any contrast. They chose the latter. Nevertheless, after our adjustments, watching anything on the NANO81 is significantly better.

Judging by how PML9009 Philips handled tonal transitions, the image scaling test should perform equally well. This time we are examining the television's algorithms responsible for enhancing the quality of images that have been recorded in lower quality. Such images can be found in various television programmes or older films. In this regard, Philips PML9009 performs quite mediocrely and significantly blurs the image. This is particularly evident in fine branches or the model's hair.

We will take another look at the tonal transitions, which performed remarkably. Within the unit, we find several levels of smoothing. Even the lowest setting can effectively eliminate any non-fluid tonal transition and will work well with the vast majority of content. More importantly, none of the settings for this function softens the effect of film grain, which is extremely important in terms of alignment with the director's vision. However, we note that sometimes it may turn out that fine details will be blurred.

It often happens that cheap 4K panels mercilessly bring to light all the "dirt" and imperfections of lower-resolution content. However, with the LG NANO81A, the situation is quite different. This is truly a solid performer when it comes to handling content that is far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A significant advantage is the gradation reduction feature that you will find in the settings. It is extraordinarily effective in combating colour banding, which is a lifesaver when watching materials with a low bitrate, for instance, from some streaming services or older files from the web. However, it is worth maintaining a certain level of caution. Since we are dealing with a less powerful chip than in LG's top models, setting this option too aggressively may sometimes result in minor artefacts or slight blurring of details. Despite this risk, I definitely encourage experimenting with this feature - in many cases, it can save the viewing experience and make low-quality material fully watchable.

Philips PML9009 is equipped with a panel that has a native refresh rate of 120 Hz. This is the essential minimum for watching all kinds of sports and is recommended for comfortable gaming in favourite titles on consoles or PCs. The manufacturer has prepared an effective system for improving the sharpness of moving images for those who do not like the characteristic stuttering of footage recorded at 24 fps or require a high level of motion fluidity, for example, when watching football matches. In the dedicated tab, we find the "Fluidity" slider, which helps eliminate stuttering, and "Motion Blur Reduction," which aids in increasing the sharpness of dynamic elements. This function works very well and granularly, meaning each setting has a real impact on the perception of motion. With such a set, every user will find their sweet spot. In the picture, we present our choice, which is a slight fluidity enhancement without the soap opera effect.

A matter directly related to motion is the pixel response time of the panel itself. The best in this regard are, of course, OLED panels, followed by IPS and ADS-based units, and finally, VA. Despite the overall good quality of the systems responsible for smoothing the image, the use of a VA panel carries consequences in the form of a black halo behind fast-moving objects. While this will not occur frequently in the tested television, it will be visible here and there.

When it comes to motion fluidity, the NANO81A unfortunately has a hard time. The television is based on a panel with a refresh rate of 60 Hz. If you are looking for perfect sharpness in dynamic football matches or fast action games, you may feel a bit disappointed. With such a low native refresh rate, fast objects on the screen will always be a little blurred.

Philips PML9009, equipped with HDMI 2.1 ports at full bandwidth, supports all features dedicated to gamers. The most basic ones, such as VRR and ALLM, are a given, but G-Sync, FreeSync, and gaming in HDR Dolby Vision with low input lag are not. These features activate without any issues and during the tests conducted, they did not present any problems. Such preparation of the television is certainly a strong point and one can say that it is a unit dedicated to gamers. For more advanced users, we also mention that the PML9009 is equipped with an HGIG mode, which will be particularly felt by gamers, as there are still relatively few games supporting Dolby Vision. This mode primarily allows for the adjustment of HDR effects to the capabilities of the television on a special board, in order to avoid dimming or burning out the image.

The television additionally features a special menu - GameBar. This allows for editing the unit's settings "on the fly", without the need to exit the game. We will also find features such as enabling a crosshair or adjusting black levels for better visibility of opponents in shadows.

In a brief summary of this paragraph, the Philips PML9009 is a unit that will certainly capture the attention of gamers. Thanks to its versatility, it will allow playing any title in the highest quality without compromises. Especially since features such as VRR, ALLM, G-Sync, FreeSync, or gameplay in HDR Dolby Vision will enhance the immersion in the favourite title.

NANO81A is unfortunately not hardware designed for e-sports. The lack of support for a 120 Hz signal is a fact that users planning to purchase this model simply have to come to terms with. Nevertheless, LG's engineers have made an effort to maximise the potential of this 60 Hz panel, offering a set of features that genuinely enhance the gaming experience. Firstly, the television supports VRR technology (within the range of 48-60 Hz) and ALLM. As a result, the image remains stable and does not "tear", and the device automatically switches to low-latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay, which allows for quick viewing of parameters without leaving the game. A very significant advantage is the support for the HGiG format. This solution is crucial for owners of modern consoles because it enables the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.